[U-Boot] [PATCH] i2c: Add support for the Arm's Versatile Express I2C controller.

Liviu Dudau Liviu.Dudau at foss.arm.com
Tue Sep 18 08:11:48 UTC 2018


On Tue, Sep 18, 2018 at 06:21:17AM +0200, Heiko Schocher wrote:
> Hello Liviu,
> 
> Am 17.09.2018 um 18:51 schrieb Liviu Dudau:
> > The Arm Versatile Express I2C controller is a simple register-based
> > controller that uses a register to control the state of the SCL and
> > SDA lines. Add support for it.
> > 
> > Signed-off-by: Liviu Dudau <liviu.dudau at foss.arm.com>
> > ---
> >   drivers/i2c/Kconfig         |   7 +
> >   drivers/i2c/Makefile        |   1 +
> >   drivers/i2c/i2c-versatile.c | 270 ++++++++++++++++++++++++++++++++++++
> >   3 files changed, 278 insertions(+)
> >   create mode 100644 drivers/i2c/i2c-versatile.c
> 
> Reviewed-by: Heiko Schocher <hs at denx.de>
> 
> I am unsure here, if all your patches are a patchserie, or if this
> i2c patch can go seperately through i2c tree ...

The patches adding support for Arm Versatile express hardware can indeed
be considered as part of a series (adding support for Mali DP, where I
also need I2C to do EDID and clock generators for pixel clocks).
However, there is no dependency between patches, so they could go
individually into different trees.

Best regards,
Liviu

> 
> bye,
> Heiko
> -- 
> DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email: hs at denx.de

-- 
====================
| I would like to |
| fix the world,  |
| but they're not |
| giving me the   |
 \ source code!  /
  ---------------
    ¯\_(ツ)_/¯


More information about the U-Boot mailing list