[U-Boot] [PATCH v2] spi: designware_spi: Disable and free clock when remove driver

[Marek Vasut]

On 09/19/2018 10:27 AM, Ley Foon Tan wrote:
> Disable and free clock when remove driver.
> 
> Signed-off-by: Ley Foon Tan <ley.foon.tan at intel.com>
> 
> ---
> v2:
> - Check return value from clk_free() and return 0 when exit function
> ---
>  drivers/spi/designware_spi.c | 16 +++++++++++++++-
>  1 file changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/spi/designware_spi.c b/drivers/spi/designware_spi.c
> index 5cca414..8f0c602 100644
> --- a/drivers/spi/designware_spi.c
> +++ b/drivers/spi/designware_spi.c
> @@ -516,8 +516,22 @@ static int dw_spi_set_mode(struct udevice *bus, uint mode)
>  static int dw_spi_remove(struct udevice *bus)
>  {
>  	struct dw_spi_priv *priv = dev_get_priv(bus);
> +	int ret;
> +
> +	ret = reset_release_bulk(&priv->resets);
> +	if (ret)
> +		return ret;
>  
> -	return reset_release_bulk(&priv->resets);
> +#if CONFIG_IS_ENABLED(CLK)
> +	ret = clk_disable(&priv->clk);
> +	if (ret)
> +		return ret;
> +
> +	ret = clk_free(&priv->clk);
> +	if (ret)
> +		return ret;
> +#endif
> +	return 0;
>  }
>  
>  static const struct dm_spi_ops dw_spi_ops = {
> 

Acked-by: Marek Vasut <marex at denx.de>

btw this doesn't apply to socfpga/master .

-- 
Best regards,
Marek Vasut