[U-Boot] [RESEND PATCH v2 00/15] riscv: Add QEMU virt board support

[Bin Meng]

Hi Rick,

On Thu, Sep 20, 2018 at 11:00 AM Rick Chen <rickchen36 at gmail.com> wrote:
>
>  > Hi Rick,
>  >
>  > On Tue, Sep 11, 2018 at 12:50 PM Bin Meng <bmeng.cn at gmail.com> wrote:
>  > >
>  > > This series adds QEMU RISC-V 'virt' board target support, with the
>  > > hope of helping people easily test U-Boot on RISC-V.
>  > >
>  > > Some existing RISC-V codes have been changed to make it easily to
>  > > support new targets. Some spotted coding style issues are fixed.
>  > >
>  > > This series is available at u-boot-x86/riscv-working for testing.
>  > >
>  > > Resend v2 to rebase on top of v2018.09 release with Tom's tree on
>  > > github, as the git.denx.de is still out of sync ...
>  > >
>  > > Changes in v2:
>  > > - Change Linux kernel entry parameters' type to support 32/64 bit
>  > > - new patch to remove CSR read/write defines in encoding.h
>  > > - new patch to pass mhartid CSR value to kernel
>  > > - new patch to move do_reset() to a common place
>  >
>  > Any comments for the v2?
>
> Hi Bin
>
> Sorry for late response!
>
> I have reviewed the v2 patch sets, it looks fine.
> And also verify the riscv-linux booting feature on ax25-ae350 board
> via bootm command.
> The verification is OK. :)

Thank you. I will prepare and resend a v3 with all these tags added
from you and Lukas, and hopefully the v3 can be applied without any
problem.

Regards,
Bin