[U-Boot] [PATCH] arm: new board - Emlid Neutis N5 support

AD-Aleksandrov aleksandr.aleksandrov at emlid.com
Fri Sep 21 07:34:34 UTC 2018


- add neutis target to dtb makefile
- add dts file for Neutis N5
- add config file for Neutis N5

Signed-off-by: Aleksandr Aleksandrov <aleksandr.aleksandrov at emlid.com>
---
 arch/arm/dts/Makefile                      |  3 +-
 arch/arm/dts/sun50i-h5-emlid-neutis-n5.dts | 90 ++++++++++++++++++++++++++++++
 configs/emlid_neutis_n5_defconfig          | 13 +++++
 3 files changed, 105 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/sun50i-h5-emlid-neutis-n5.dts
 create mode 100644 configs/emlid_neutis_n5_defconfig

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 44ebc50..3e49d72 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -391,7 +391,8 @@ dtb-$(CONFIG_MACH_SUN50I_H5) += \
 	sun50i-h5-orangepi-zero-plus.dtb \
 	sun50i-h5-orangepi-pc2.dtb \
 	sun50i-h5-orangepi-prime.dtb \
-	sun50i-h5-orangepi-zero-plus2.dtb
+	sun50i-h5-orangepi-zero-plus2.dtb \
+	sun50i-h5-emlid-neutis-n5.dtb
 dtb-$(CONFIG_MACH_SUN50I_H6) += \
 	sun50i-h6-orangepi-one-plus.dtb \
 	sun50i-h6-pine-h64.dtb
diff --git a/arch/arm/dts/sun50i-h5-emlid-neutis-n5.dts b/arch/arm/dts/sun50i-h5-emlid-neutis-n5.dts
new file mode 100644
index 0000000..deb6e76
--- /dev/null
+++ b/arch/arm/dts/sun50i-h5-emlid-neutis-n5.dts
@@ -0,0 +1,90 @@
+/*s
+ * Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov at emlid.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Emlid Neutis N5";
+	compatible = "emlid,neutis-n5", "allwinner,sun50i-h5";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
diff --git a/configs/emlid_neutis_n5_defconfig b/configs/emlid_neutis_n5_defconfig
new file mode 100644
index 0000000..5d6554c
--- /dev/null
+++ b/configs/emlid_neutis_n5_defconfig
@@ -0,0 +1,13 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SPL=y
+CONFIG_MACH_SUN50I_H5=y
+CONFIG_DRAM_CLK=408
+CONFIG_DRAM_ZQ=3881977
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_NR_DRAM_BANKS=1
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-emlid-neutis-n5"
-- 
2.7.4



More information about the U-Boot mailing list