[U-Boot] [PATCH v2 00/14] Introduce fastboot support for dragonboard410c

[Ramon Fried]

This set of patches introduce fastboot support for Qualcomm
db410c.
As part of the patch, a small quirk is added to ci_udc through
a weaklly linked function.


Changes in v2:
Added a new patch that was left out somehow. all other patches
are the same.

Ramon Fried (14):
  ehci: Replace board_prepare_usb with board_usb_init
  ehci: msm: Add missing platdata
  dts: db410c: add alias for USB
  db410c: serial# env using msm board serial
  phy: db410c: Add MSM USB PHY driver
  dts: db410c: Add bindings for MSM USB phy
  configs: db410c: Enable USB PHY
  ehci: msm: switch to generic PHY uclass
  ehci: msm: use init_type in probe
  usb:ci_udc: Introduce init_after_reset phy function
  usb: ehci-msm: Add init_after_reset for CI_UDC
  DB410c: Enable fastboot support
  db410c: automatically launch fastboot
  usb:ci_udc: don't overwrite configuration on pullup

 MAINTAINERS                                   |   1 +
 arch/arm/dts/dragonboard410c.dts              |  11 ++
 arch/arm/mach-snapdragon/Kconfig              |   1 +
 .../dragonboard410c/dragonboard410c.c         |  17 ++-
 configs/dragonboard410c_defconfig             |  11 ++
 drivers/phy/Kconfig                           |   8 ++
 drivers/phy/Makefile                          |   1 +
 drivers/phy/msm8916-usbh-phy.c                | 109 ++++++++++++++++++
 drivers/usb/gadget/ci_udc.c                   |   9 +-
 drivers/usb/host/Kconfig                      |   3 +-
 drivers/usb/host/ehci-msm.c                   |  78 +++++--------
 11 files changed, 192 insertions(+), 57 deletions(-)
 create mode 100644 drivers/phy/msm8916-usbh-phy.c

-- 
2.18.0