[U-Boot] Socfpga ocram warm boot

[Dalon L Westergreen]

On Thu, 2018-09-20 at 09:25 -0400, Thomas Epperson wrote:
> I've done some troubleshooting on warm resets and determined that the ocramis
> not being set correctly for warm reset to run properly (it hangs theprocessor
> on my de0-nano-soc board).I think it should be not enabled or fully setup so
> it properly works.

That is likely an issue specific to the silicon on that board, and is not a
general issue in production devices.  I do not believe this is an issue on newer
production silicon.  

--dalon

> _______________________________________________U-Boot mailing listU-
> Boot at lists.denx.dehttps://lists.denx.de/listinfo/u-boot