[U-Boot] [PATCH v1 2/2] WIP: x86: acpi: Generate SPCR table

Andy Shevchenko andriy.shevchenko at linux.intel.com
Sat Sep 22 13:05:05 UTC 2018


TBD

Signed-off-by: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
---
 arch/x86/include/asm/acpi_table.h | 25 ++++++++++
 arch/x86/lib/acpi_table.c         | 82 +++++++++++++++++++++++++++++++
 2 files changed, 107 insertions(+)

diff --git a/arch/x86/include/asm/acpi_table.h b/arch/x86/include/asm/acpi_table.h
index 95fae036f6..27435871b9 100644
--- a/arch/x86/include/asm/acpi_table.h
+++ b/arch/x86/include/asm/acpi_table.h
@@ -303,6 +303,31 @@ struct acpi_mcfg_mmconfig {
 /* ACPI global NVS structure */
 struct acpi_global_nvs;
 
+/* SPCR (Serial Port Console Redirection table) */
+struct __packed acpi_spcr {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u8 interface_type;	/* 0=full 16550, 1=subset of 16550 */
+	u8 reserved[3];
+	struct acpi_gen_regaddr serial_port;	/* The base address of the Serial Port register set */
+	u8 interrupt_type;
+	u8 pc_interrupt;
+	u32 interrupt;		/* Global system interrupt */
+	u8 baud_rate;
+	u8 parity;
+	u8 stop_bits;
+	u8 flow_control;
+	u8 terminal_type;
+	u8 reserved1;
+	u16 pci_device_id;	/* Must be 0xffff if not PCI device */
+	u16 pci_vendor_id;	/* Must be 0xffff if not PCI device */
+	u8 pci_bus;
+	u8 pci_device;
+	u8 pci_function;
+	u32 pci_flags;
+	u8 pci_segment;
+	u32 reserved2;
+};
+
 /* These can be used by the target port */
 
 void acpi_fill_header(struct acpi_table_header *header, char *signature);
diff --git a/arch/x86/lib/acpi_table.c b/arch/x86/lib/acpi_table.c
index c6b2026613..551a78b11a 100644
--- a/arch/x86/lib/acpi_table.c
+++ b/arch/x86/lib/acpi_table.c
@@ -12,6 +12,7 @@
 #include <cpu.h>
 #include <dm.h>
 #include <dm/uclass-internal.h>
+#include <serial.h>
 #include <version.h>
 #include <asm/acpi/global_nvs.h>
 #include <asm/acpi_table.h>
@@ -338,6 +339,79 @@ static void acpi_create_mcfg(struct acpi_mcfg *mcfg)
 	header->checksum = table_compute_checksum((void *)mcfg, header->length);
 }
 
+static void acpi_create_spcr(struct acpi_spcr *spcr)
+{
+	struct acpi_table_header *header = &(spcr->header);
+	struct serial_device_info info = {0};
+	int access_size;
+	int ret;
+
+	/* Fill out header fields */
+	acpi_fill_header(header, "SPCR");
+	header->length = sizeof(struct acpi_spcr);
+	header->revision = 2;
+
+	ret = serial_getinfo(&info);
+	if (ret)
+		debug("Can't get information of serial device: %d\n", ret);
+
+	/* Encode baud rate */
+	switch (info.baudrate) {
+	case 9600:
+		spcr->baud_rate = 3;
+		break;
+	case 19200:
+		spcr->baud_rate = 4;
+		break;
+	case 57600:
+		spcr->baud_rate = 6;
+		break;
+	case 115200:
+		spcr->baud_rate = 7;
+		break;
+	default:
+		spcr->baud_rate = 0;
+		break;
+	}
+
+	/* Encode register access size */
+	switch (info.reg_shift) {
+	case 0:
+		access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS;
+		break;
+	case 1:
+		access_size = ACPI_ACCESS_SIZE_WORD_ACCESS;
+		break;
+	case 2:
+		access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS;
+		break;
+	case 3:
+		access_size = ACPI_ACCESS_SIZE_QWORD_ACCESS;
+		break;
+	default:
+		access_size = ACPI_ACCESS_SIZE_UNDEFINED;
+		break;
+	}
+
+	spcr->serial_port.space_id = ACPI_ADDRESS_SPACE_MEMORY;
+	spcr->serial_port.bit_width = info.reg_width;
+	spcr->serial_port.bit_offset = info.reg_offset;
+	spcr->serial_port.access_size = access_size;
+	spcr->serial_port.addrl = info.addr >> 0;
+	spcr->serial_port.addrh = info.addr >> 32;
+
+	/* Hard coded values for now */
+	spcr->parity = 0;
+	spcr->stop_bits = 1;
+
+	/* No PCI devices for now */
+	spcr->pci_device_id = 0xffff;
+	spcr->pci_vendor_id = 0xffff;
+
+	/* Fix checksum */
+	header->checksum = table_compute_checksum((void *)spcr, header->length);
+}
+
 /*
  * QEMU's version of write_acpi_tables is defined in drivers/misc/qfw.c
  */
@@ -352,6 +426,7 @@ ulong write_acpi_tables(ulong start)
 	struct acpi_fadt *fadt;
 	struct acpi_mcfg *mcfg;
 	struct acpi_madt *madt;
+	struct acpi_spcr *spcr;
 	int i;
 
 	current = start;
@@ -440,6 +515,13 @@ ulong write_acpi_tables(ulong start)
 	acpi_add_table(rsdp, mcfg);
 	current = ALIGN(current, 16);
 
+	debug("ACPI:    * SPCR\n");
+	spcr = (struct acpi_spcr *)current;
+	acpi_create_spcr(spcr);
+	current += spcr->header.length;
+	acpi_add_table(rsdp, spcr);
+	current = ALIGN(current, 16);
+
 	debug("current = %x\n", current);
 
 	acpi_rsdp_addr = (unsigned long)rsdp;
-- 
2.18.0



More information about the U-Boot mailing list