[U-Boot] [PATCH v2 0/7] [RESEND] Improvements for the dwc3_generic driver
Jean-Jacques Hiblot
jjhiblot at ti.com
Mon Sep 24 15:38:51 UTC 2018
On 21/09/2018 15:02, Jean-Jacques Hiblot wrote:
>
>
> On 21/09/2018 12:43, Lukasz Majewski wrote:
>> Hi Jean-Jacques,
>>
>>> On 21/09/2018 11:24, Lukasz Majewski wrote:
>>>> Hi Jean-Jacques,
>>>>> On 21/09/2018 10:50, Lukasz Majewski wrote:
>>>>>> Hi Jean-Jacques,
>>>>>>> Hi Marek,
>>>>>>>
>>>>>>> I haven't heard of you on this series.
>>>>>>>
>>>>>>> It is already a resend and has been tested on 2 platforms (zcu100
>>>>>>> and dra7/am57).
>>>>>>>
>>>>>>> Can you please consider it for inclusion?
>>>>>> This is not Marek to blame for the delay - I had some non open
>>>>>> source tasks to finish (and I do apologise for this situation).
>>>>> Thanks. I am not blaming anyone.
>>>> :-)
>>>>
>>>> Could you check the build result?
>>>> https://travis-ci.org/lmajewski/u-boot-dfu/builds/431388980
>>>> I do see some issues with "Freescale ARM32/ARM64".
>>> I can reproduce the problem.
>>> The root cause is that I moved the phy handling operation from the
>>> host (xhci-dwc3.c) to the core dwc3/core.c thinking that all users of
>>> the dwc3 would have the core code. Well that is not the case.
>> Maybe a silly question - how those boards work as they do not
>> use/include the DWC3 core?
> It looks like the host side of the dwc3 is mostly self-contained and
> that the code in dwc3/core.c is mostly used by the gadget side.
>
It seems that the PHY code is not used by the platforms that failed to
build, so it can be compiled out.
I'll send a v3 shortly.
JJ
>>
>> They use xhci PHY handling code and what code on top?
>>
>>> I see 2 solutions:
>>> * move the phy code back to xhci-dwc3
>>> * enable the core code for dwc3 (CONFIG_USB_DWC3) for the failing
>>> platforms
>>>
>>> Any preference ?
>>>
>>>
>>>>> I just wanted to make sure that this
>>>>> wasn't lost in limbo.
>>>>>> Your patches are now under build testing on travis-CI:
>>>>>> https://travis-ci.org/lmajewski/u-boot-dfu/builds/431388980
>>>>>>
>>>>>> I will send the PR after CI finish.
>>>>>>> Thanks,
>>>>>>>
>>>>>>> JJ
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On 04/09/2018 15:42, Jean-Jacques Hiblot wrote:
>>>>>>>> Resending this series after rebasing on top of latest u-boot.
>>>>>>>>
>>>>>>>> This series aims at bringing improvements to the dwc3_generic
>>>>>>>> driver so that it can be used by most of the platforms using the
>>>>>>>> dwc3 controller.
>>>>>>>>
>>>>>>>> I tested this on with DRA7 and AM57x platforms for both
>>>>>>>> Peripheral and Host operations. The code to enable DM USB host
>>>>>>>> & dev support for those platforms will be submitted in a
>>>>>>>> separate series.
>>>>>>>>
>>>>>>>> Michal Simek has tested this series:
>>>>>>>> " I have tested it on zcu100 with usb stick, usb to ethernet
>>>>>>>> converter and also dfu.
>>>>>>>> Tested-by: Michal Simek <michal.simek at xilinx.com>"
>>>>>>>>
>>>>>>>> Enhancements:
>>>>>>>> - use separate Kconfig option for DM USB Periphal and DM USB
>>>>>>>> Host. This allow platforms to keep their non-DM USB peripheral
>>>>>>>> code and use the DM USB host.
>>>>>>>> - fixes the bind/probe confusion in dwc3_generic. The probe is
>>>>>>>> done when the USB device is first needed.
>>>>>>>> - handles PHYs when in the peripheral mode. The code to handle
>>>>>>>> the PHYs is shared with the host side
>>>>>>>> - handles clock and reset
>>>>>>>> - bind host controller to the more generic driver 'xhci-dwc3'
>>>>>>>>
>>>>>>>>
>>>>>>>> Changes in v2:
>>>>>>>> - Updated commit log
>>>>>>>> - Fixed typo in thordown.c
>>>>>>>> - select DM_USB_DEV by default for zynqmp platforms
>>>>>>>>
>>>>>>>> Jean-Jacques Hiblot (7):
>>>>>>>> usb: gadget: Do not call board_usb_xxx() directly in USB
>>>>>>>> gadget drivers
>>>>>>>> usb: introduce a separate config option for DM USB device
>>>>>>>> usb: udc: implement DM versions of
>>>>>>>> usb_gadget_initialize()/_release()/_handle_interrupt()
>>>>>>>> dwc3_generic: do not probe the USB device driver when it's
>>>>>>>> bound dwc3: move phy operation to core.c
>>>>>>>> dwc3-generic: Handle the PHYs, the clocks and the reset
>>>>>>>> lines dwc3-generic: Add select_dr_mode operation
>>>>>>>>
>>>>>>>> arch/arm/Kconfig | 2 +
>>>>>>>> cmd/fastboot.c | 4 +-
>>>>>>>> cmd/rockusb.c | 4 +-
>>>>>>>> cmd/thordown.c | 4 +-
>>>>>>>> cmd/usb_gadget_sdp.c | 4 +-
>>>>>>>> cmd/usb_mass_storage.c | 4 +-
>>>>>>>> common/dfu.c | 6 +-
>>>>>>>> drivers/usb/Kconfig | 6 ++
>>>>>>>> drivers/usb/dwc3/Kconfig | 7 +-
>>>>>>>> drivers/usb/dwc3/core.c | 86 +++++++++++++++-
>>>>>>>> drivers/usb/dwc3/dwc3-generic.c | 207
>>>>>>>> +++++++++++++++++++++++++++++---------
>>>>>>>> drivers/usb/dwc3/ep0.c | 1 -
>>>>>>>> drivers/usb/gadget/ether.c | 38 +------
>>>>>>>> drivers/usb/gadget/udc/udc-core.c | 44 +++++++-
>>>>>>>> drivers/usb/host/xhci-dwc3.c | 93 ++---------------
>>>>>>>> include/dwc3-uboot.h | 7 ++
>>>>>>>> include/linux/usb/gadget.h | 18 ++++ 17 files changed,
>>>>>>>> 351 insertions(+), 184 deletions(-)
>>>>>>
>>>>>> Best regards,
>>>>>>
>>>>>> Lukasz Majewski
>>>>>>
>>>>>> --
>>>>>>
>>>>>> DENX Software Engineering GmbH, Managing Director: Wolfgang
>>>>>> Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell,
>>>>>> Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email:
>>>>>> wd at denx.de
>>>>
>>>>
>>>> Best regards,
>>>>
>>>> Lukasz Majewski
>>>>
>>>> --
>>>>
>>>> DENX Software Engineering GmbH, Managing Director: Wolfgang
>>>> Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell,
>>>> Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email:
>>>> wd at denx.de
>>
>>
>>
>> Best regards,
>>
>> Lukasz Majewski
>>
>> --
>>
>> DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
>> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
>> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
More information about the U-Boot
mailing list