[U-Boot] [PATCH v2 2/3] arm: layerscape: Remove CONFIG_U_QE define in head files

[Ran Wang]

Because it has been moved to drivers/qe/Kconfig instead.
Following platforms are involved:
T102xQDS, T102xRDB, T1040QDS, ls1021aqds, ls1021atwr, ls1043ardb

Signed-off-by: Ran Wang <ran.wang_1 at nxp.com>
---
Change in v2:
	Remove CONFIG_U_QE from more platforms besides ls1021a

 include/configs/T102xQDS.h   | 1 -
 include/configs/T102xRDB.h   | 1 -
 include/configs/T1040QDS.h   | 1 -
 include/configs/ls1021aqds.h | 1 -
 include/configs/ls1021atwr.h | 1 -
 include/configs/ls1043ardb.h | 7 -------
 6 files changed, 12 deletions(-)

diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h
index 8a38c5e19c..191616b8b0 100644
--- a/include/configs/T102xQDS.h
+++ b/include/configs/T102xQDS.h
@@ -659,7 +659,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_DPAA_FMAN
 
 #define CONFIG_QE
-#define CONFIG_U_QE
 /* Default address of microcode for the Linux FMan driver */
 #if defined(CONFIG_SPIFLASH)
 /*
diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h
index f7a54f7a97..ac5de8d164 100644
--- a/include/configs/T102xRDB.h
+++ b/include/configs/T102xRDB.h
@@ -669,7 +669,6 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_TARGET_T1024RDB
 #define CONFIG_QE
-#define CONFIG_U_QE
 #endif
 /* Default address of microcode for the Linux FMan driver */
 #if defined(CONFIG_SPIFLASH)
diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h
index e890860b7e..25615be40e 100644
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@@ -549,7 +549,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_DPAA_PME
 
 #define CONFIG_QE
-#define CONFIG_U_QE
 /* Default address of microcode for the Linux Fman driver */
 #if defined(CONFIG_SPIFLASH)
 /*
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 994e6ca362..7f7ffdede1 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -107,7 +107,6 @@ unsigned long get_board_ddr_clk(void);
 
 #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
 	!defined(CONFIG_QSPI_BOOT)
-#define CONFIG_U_QE
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 #endif
 
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 75b2e2fbbd..ddd024e8c0 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -106,7 +106,6 @@
 
 #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
 	!defined(CONFIG_QSPI_BOOT)
-#define CONFIG_U_QE
 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 #endif
 
diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index bc639e586f..ffd92dbb43 100644
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -268,13 +268,6 @@
 #endif
 #endif
 
-/* QE */
-#ifndef SPL_NO_QE
-#if !defined(CONFIG_NAND_BOOT) && !defined(CONFIG_QSPI_BOOT)
-#define CONFIG_U_QE
-#endif
-#endif
-
 /* SATA */
 #ifndef SPL_NO_SATA
 #ifndef CONFIG_CMD_EXT2
-- 
2.17.1