[U-Boot] [PATCH v9 1/8] ppa/fm/qe: use block layer in ppa/fm/qe driver
Yinbo Zhu
yinbo.zhu at nxp.com
Tue Sep 25 06:47:06 UTC 2018
At present the MMC subsystem maintains its own list
of MMC devices. This cannot work with driver model
when CONFIG_BLK is enabled, use blk_dread to
replace previous mmc read interface,
use mmc_get_blk_desc to get the mmc device property
Signed-off-by: Yinbo Zhu <yinbo.zhu at nxp.com>
---
Change in v9:
fix ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig compiling errors
arch/arm/cpu/armv8/fsl-layerscape/ppa.c | 7 +++----
drivers/net/fm/fm.c | 2 +-
drivers/qe/qe.c | 2 +-
3 files changed, 5 insertions(+), 6 deletions(-)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/ppa.c b/arch/arm/cpu/armv8/fsl-layerscape/ppa.c
index a31c4d9..d391f93 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/ppa.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/ppa.c
@@ -99,7 +99,7 @@ int ppa_init(void)
cnt = DIV_ROUND_UP(fdt_header_len, 512);
debug("%s: MMC read PPA FIT header: dev # %u, block # %u, count %u\n",
__func__, dev, blk, cnt);
- ret = mmc->block_dev.block_read(&mmc->block_dev, blk, cnt, fitp);
+ ret = blk_dread(mmc_get_blk_desc(mmc), blk, cnt, fitp);
if (ret != cnt) {
free(fitp);
printf("MMC/SD read of PPA FIT header at offset 0x%x failed\n",
@@ -123,7 +123,7 @@ int ppa_init(void)
blk = CONFIG_SYS_LS_PPA_ESBC_ADDR >> 9;
cnt = DIV_ROUND_UP(CONFIG_LS_PPA_ESBC_HDR_SIZE, 512);
- ret = mmc->block_dev.block_read(&mmc->block_dev, blk, cnt, ppa_hdr_ddr);
+ ret = blk_dread(mmc_get_blk_desc(mmc), blk, cnt, ppa_hdr_ddr);
if (ret != cnt) {
free(ppa_hdr_ddr);
printf("MMC/SD read of PPA header failed\n");
@@ -149,8 +149,7 @@ int ppa_init(void)
cnt = DIV_ROUND_UP(fw_length, 512);
debug("%s: MMC read PPA FIT image: dev # %u, block # %u, count %u\n",
__func__, dev, blk, cnt);
- ret = mmc->block_dev.block_read(&mmc->block_dev,
- blk, cnt, ppa_fit_addr);
+ ret = blk_dread(mmc_get_blk_desc(mmc), blk, cnt, ppa_fit_addr);
if (ret != cnt) {
free(ppa_fit_addr);
printf("MMC/SD read of PPA FIT header at offset 0x%x failed\n",
diff --git a/drivers/net/fm/fm.c b/drivers/net/fm/fm.c
index 3327073..c5cf188 100644
--- a/drivers/net/fm/fm.c
+++ b/drivers/net/fm/fm.c
@@ -402,7 +402,7 @@ int fm_init_common(int index, struct ccsr_fman *reg)
printf("\nMMC read: dev # %u, block # %u, count %u ...\n",
dev, blk, cnt);
mmc_init(mmc);
- (void)mmc->block_dev.block_read(&mmc->block_dev, blk, cnt,
+ (void)blk_dread(mmc_get_blk_desc(mmc), blk, cnt,
addr);
}
#elif defined(CONFIG_SYS_QE_FMAN_FW_IN_REMOTE)
diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c
index 7654df8..7010bbc 100644
--- a/drivers/qe/qe.c
+++ b/drivers/qe/qe.c
@@ -218,7 +218,7 @@ void u_qe_init(void)
printf("\nMMC read: dev # %u, block # %u, count %u ...\n",
dev, blk, cnt);
mmc_init(mmc);
- (void)mmc->block_dev.block_read(&mmc->block_dev, blk, cnt,
+ (void)blk_dread(mmc_get_blk_desc(mmc), blk, cnt,
addr);
}
#endif
--
1.7.1
More information about the U-Boot
mailing list