[U-Boot] [PATCH 3/6] MSCC: add board support for the VCoreIII based evaluation boards

[Gregory CLEMENT]

Adding the support for 3 boards sharing common code:
 - PCB120 and PCB 123 for Ocelot chip
 - PCB 91 for Luton chip

Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
---
 board/mscc/common/board.c  | 29 +++++++++++++++++++++++++++++
 board/mscc/luton/Kconfig   | 14 ++++++++++++++
 board/mscc/luton/Makefile  |  4 ++++
 board/mscc/luton/luton.c   | 14 ++++++++++++++
 board/mscc/ocelot/Kconfig  | 24 ++++++++++++++++++++++++
 board/mscc/ocelot/Makefile |  5 +++++
 board/mscc/ocelot/ocelot.c | 38 ++++++++++++++++++++++++++++++++++++++
 7 files changed, 128 insertions(+)
 create mode 100644 board/mscc/common/board.c
 create mode 100644 board/mscc/luton/Kconfig
 create mode 100644 board/mscc/luton/Makefile
 create mode 100644 board/mscc/luton/luton.c
 create mode 100644 board/mscc/ocelot/Kconfig
 create mode 100644 board/mscc/ocelot/Makefile
 create mode 100644 board/mscc/ocelot/ocelot.c

diff --git a/board/mscc/common/board.c b/board/mscc/common/board.c
new file mode 100644
index 0000000000..86e7bf3353
--- /dev/null
+++ b/board/mscc/common/board.c
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/addrspace.h>
+#include <asm/types.h>
+#include <environment.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_r(void)
+{
+	u32 ctrl;
+
+	/* Prepare SPI controller to be used in master mode */
+	writel(0, REG_CFG(ICPU_SW_MODE));
+	ctrl = readl(REG_CFG(ICPU_GENERAL_CTRL));
+
+	writel((ctrl & ~ICPU_GENERAL_CTRL_IF_SI_OWNER_M) |
+	       ICPU_GENERAL_CTRL_IF_SI_OWNER(2),
+	       REG_CFG(ICPU_GENERAL_CTRL));
+
+	/* Address of boot parameters */
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE;
+	return 0;
+}
diff --git a/board/mscc/luton/Kconfig b/board/mscc/luton/Kconfig
new file mode 100644
index 0000000000..e1199808d5
--- /dev/null
+++ b/board/mscc/luton/Kconfig
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+if SOC_LUTON
+
+config SYS_VENDOR
+	default "mscc"
+
+config SYS_BOARD
+	default "luton"
+
+config SYS_CONFIG_NAME
+	default "luton"
+
+endif
diff --git a/board/mscc/luton/Makefile b/board/mscc/luton/Makefile
new file mode 100644
index 0000000000..98bc47ba82
--- /dev/null
+++ b/board/mscc/luton/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+obj-$(CONFIG_SOC_LUTON)	:= luton.o
+obj-y += ../common/board.o
diff --git a/board/mscc/luton/luton.c b/board/mscc/luton/luton.c
new file mode 100644
index 0000000000..8c31bbb12a
--- /dev/null
+++ b/board/mscc/luton/luton.c
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+void board_debug_uart_init(void)
+{
+	/* too early for the pinctrl driver, so configure the UART pins here */
+	writel(BIT(30)|BIT(31), REG_GCB((0x68+8*4)));
+	writel(~(BIT(30)|BIT(31)), REG_GCB((0x68+9*4)));
+}
diff --git a/board/mscc/ocelot/Kconfig b/board/mscc/ocelot/Kconfig
new file mode 100644
index 0000000000..0804f5081d
--- /dev/null
+++ b/board/mscc/ocelot/Kconfig
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+config SYS_VENDOR
+	default "mscc"
+
+if SOC_OCELOT
+
+config SYS_BOARD
+	default "ocelot"
+
+config SYS_CONFIG_NAME
+	default "ocelot"
+
+endif
+
+if SOC_LUTON
+
+config SYS_BOARD
+	default "luton"
+
+config SYS_CONFIG_NAME
+	default "luton"
+
+endif
diff --git a/board/mscc/ocelot/Makefile b/board/mscc/ocelot/Makefile
new file mode 100644
index 0000000000..f6a665ca83
--- /dev/null
+++ b/board/mscc/ocelot/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+obj-$(CONFIG_SOC_OCELOT)	:= ocelot.o
+obj-y += ../common/board.o
+
diff --git a/board/mscc/ocelot/ocelot.c b/board/mscc/ocelot/ocelot.c
new file mode 100644
index 0000000000..971fa93d07
--- /dev/null
+++ b/board/mscc/ocelot/ocelot.c
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Microsemi Corporation
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/addrspace.h>
+#include <asm/types.h>
+#include <environment.h>
+#include <spi.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void external_cs_manage(struct udevice *dev, bool enable)
+{
+	u32 cs = spi_chip_select(dev);
+        /* IF_SI0_OWNER, select the owner of the SI interface
+         * Encoding: 0: SI Slave
+         *           1: SI Boot Master
+         *           2: SI Master Controller
+         */
+        if (!enable) {
+                writel(ICPU_SW_MODE_SW_PIN_CTRL_MODE |
+		       ICPU_SW_MODE_SW_SPI_CS(BIT(cs)),
+		       REG_CFG(ICPU_SW_MODE));
+                writel((readl(REG_CFG(ICPU_GENERAL_CTRL))
+			& ~ICPU_GENERAL_CTRL_IF_SI_OWNER_M) |
+		       ICPU_GENERAL_CTRL_IF_SI_OWNER(2),
+		       REG_CFG(ICPU_GENERAL_CTRL));
+        } else {
+                writel(0, REG_CFG(ICPU_SW_MODE));
+                writel((readl(REG_CFG(ICPU_GENERAL_CTRL)) &
+			~ICPU_GENERAL_CTRL_IF_SI_OWNER_M) |
+		       ICPU_GENERAL_CTRL_IF_SI_OWNER(1),
+		       REG_CFG(ICPU_GENERAL_CTRL));
+        }
+}
-- 
2.19.0