[U-Boot] [PATCH V5 29/32] fsl_esdhc: Update usdhc driver to support i.MX8
Peng Fan
peng.fan at nxp.com
Wed Sep 26 13:52:53 UTC 2018
From: Ye Li <ye.li at nxp.com>
Add CONFIG_ARCH_IMX8 to use the 64bits support in usdhc driver.
Signed-off-by: Ye Li <ye.li at nxp.com>
Signed-off-by: Peng Fan <peng.fan at nxp.com>
Cc: Jaehoon Chung <jh80.chung at samsung.com>
---
drivers/mmc/fsl_esdhc.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 03c6743ae8..220f4f74a8 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -257,7 +257,7 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc,
int timeout;
struct fsl_esdhc *regs = priv->esdhc_regs;
#if defined(CONFIG_FSL_LAYERSCAPE) || defined(CONFIG_S32V234) || \
- defined(CONFIG_MX8M)
+ defined(CONFIG_IMX8) || defined(CONFIG_MX8M)
dma_addr_t addr;
#endif
uint wml_value;
@@ -271,7 +271,7 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc,
esdhc_clrsetbits32(®s->wml, WML_RD_WML_MASK, wml_value);
#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
#if defined(CONFIG_FSL_LAYERSCAPE) || defined(CONFIG_S32V234) || \
- defined(CONFIG_MX8M)
+ defined(CONFIG_IMX8) || defined(CONFIG_MX8M)
addr = virt_to_phys((void *)(data->dest));
if (upper_32_bits(addr))
printf("Error found for upper 32 bits\n");
@@ -301,7 +301,7 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc,
wml_value << 16);
#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
#if defined(CONFIG_FSL_LAYERSCAPE) || defined(CONFIG_S32V234) || \
- defined(CONFIG_MX8M)
+ defined(CONFIG_IMX8) || defined(CONFIG_MX8M)
addr = virt_to_phys((void *)(data->src));
if (upper_32_bits(addr))
printf("Error found for upper 32 bits\n");
@@ -367,7 +367,7 @@ static void check_and_invalidate_dcache_range
unsigned size = roundup(ARCH_DMA_MINALIGN,
data->blocks*data->blocksize);
#if defined(CONFIG_FSL_LAYERSCAPE) || defined(CONFIG_S32V234) || \
- defined(CONFIG_MX8M)
+ defined(CONFIG_IMX8) || defined(CONFIG_MX8M)
dma_addr_t addr;
addr = virt_to_phys((void *)(data->dest));
--
2.14.1
More information about the U-Boot
mailing list