[U-Boot] [PATCH][v2] armv8: lsch3: Add support of serdes3 module
Priyanka Jain
priyanka.jain at nxp.com
Thu Sep 27 05:02:05 UTC 2018
Some lsch3 based SoCs like lx2160a contains three
serdes modules.
Add support for third serdes protocol in lsch3
Signed-off-by: Priyanka Jain <priyanka.jain at nxp.com>
---
Changes for v2:
Updated copyright
Renamed CONFIG_SYS_FSL_SRDS_3 to CONFIG_SYS_NXP_SRDS_3
arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 3 +
.../cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c | 71 ++++++++++++++++++++++
.../include/asm/arch-fsl-layerscape/fsl_serdes.h | 2 +
3 files changed, 76 insertions(+)
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index f2111fa..fd31ae1 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -348,6 +348,9 @@ config SYS_FSL_SRDS_1
config SYS_FSL_SRDS_2
bool
+config SYS_NXP_SRDS_3
+ bool
+
config SYS_HAS_SERDES
bool
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
index 2bef841..bfd2868 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0+
/*
+ * Copyright 2016-2018 NXP
* Copyright 2014-2015 Freescale Semiconductor, Inc.
*/
@@ -16,6 +17,9 @@ static u8 serdes1_prtcl_map[SERDES_PRCTL_COUNT];
#ifdef CONFIG_SYS_FSL_SRDS_2
static u8 serdes2_prtcl_map[SERDES_PRCTL_COUNT];
#endif
+#ifdef CONFIG_SYS_NXP_SRDS_3
+static u8 serdes3_prtcl_map[SERDES_PRCTL_COUNT];
+#endif
#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
int xfi_dpmac[XFI8 + 1];
@@ -57,6 +61,12 @@ int is_serdes_configured(enum srds_prtcl device)
ret |= serdes2_prtcl_map[device];
#endif
+#ifdef CONFIG_SYS_NXP_SRDS_3
+ if (!serdes3_prtcl_map[NONE])
+ fsl_serdes_init();
+
+ ret |= serdes3_prtcl_map[device];
+#endif
return !!ret;
}
@@ -82,6 +92,13 @@ int serdes_get_first_lane(u32 sd, enum srds_prtcl device)
cfg >>= FSL_CHASSIS3_SRDS2_PRTCL_SHIFT;
break;
#endif
+#ifdef CONFIG_SYS_NXP_SRDS_3
+ case NXP_SRDS_3:
+ cfg = gur_in32(&gur->rcwsr[FSL_CHASSIS3_SRDS3_REGSR - 1]);
+ cfg &= FSL_CHASSIS3_SRDS3_PRTCL_MASK;
+ cfg >>= FSL_CHASSIS3_SRDS3_PRTCL_SHIFT;
+ break;
+#endif
default:
printf("invalid SerDes%d\n", sd);
break;
@@ -201,6 +218,12 @@ struct serdes_prctl_info srds_prctl_info[] = {
.shift = FSL_CHASSIS3_SRDS2_PRTCL_SHIFT
},
#endif
+#ifdef CONFIG_SYS_NXP_SRDS_3
+ {.id = 3,
+ .mask = FSL_CHASSIS3_SRDS3_PRTCL_MASK,
+ .shift = FSL_CHASSIS3_SRDS3_PRTCL_SHIFT
+ },
+#endif
{} /* NULL ENTRY */
};
@@ -341,6 +364,11 @@ int setup_serdes_volt(u32 svdd)
(void *)(CONFIG_SYS_FSL_LSCH3_SERDES_ADDR + 0x10000);
u32 cfg_rcwsrds2 = gur_in32(&gur->rcwsr[FSL_CHASSIS3_SRDS2_REGSR - 1]);
#endif
+#ifdef CONFIG_SYS_NXP_SRDS_3
+ struct ccsr_serdes __iomem *serdes3_base =
+ (void *)(CONFIG_SYS_FSL_LSCH3_SERDES_ADDR + 0x20000);
+ u32 cfg_rcwsrds3 = gur_in32(&gur->rcwsr[FSL_CHASSIS3_SRDS3_REGSR - 1]);
+#endif
u32 cfg_tmp;
int svdd_cur, svdd_tar;
int ret = 1;
@@ -370,6 +398,9 @@ int setup_serdes_volt(u32 svdd)
#ifdef CONFIG_SYS_FSL_SRDS_2
do_enabled_lanes_reset(2, cfg_rcwsrds2, serdes2_base, false);
#endif
+#ifdef CONFIG_SYS_NXP_SRDS_3
+ do_enabled_lanes_reset(3, cfg_rcwsrds3, serdes3_base, false);
+#endif
/* Put the all enabled PLL in reset */
#ifdef CONFIG_SYS_FSL_SRDS_1
@@ -383,6 +414,12 @@ int setup_serdes_volt(u32 svdd)
do_pll_reset(cfg_tmp, serdes2_base);
#endif
+#ifdef CONFIG_SYS_NXP_SRDS_3
+ cfg_tmp = cfg_rcwsrds3 & 0x30;
+ cfg_tmp >>= 4;
+ do_pll_reset(cfg_tmp, serdes3_base);
+#endif
+
/* Put the Rx/Tx calibration into reset */
#ifdef CONFIG_SYS_FSL_SRDS_1
do_rx_tx_cal_reset(serdes1_base);
@@ -392,6 +429,10 @@ int setup_serdes_volt(u32 svdd)
do_rx_tx_cal_reset(serdes2_base);
#endif
+#ifdef CONFIG_SYS_NXP_SRDS_3
+ do_rx_tx_cal_reset(serdes3_base);
+#endif
+
ret = set_serdes_volt(svdd);
if (ret < 0) {
printf("could not change SVDD\n");
@@ -408,6 +449,11 @@ int setup_serdes_volt(u32 svdd)
cfg_tmp >>= 2;
do_serdes_enable(cfg_tmp, serdes2_base);
#endif
+#ifdef CONFIG_SYS_NXP_SRDS_3
+ cfg_tmp = cfg_rcwsrds3 & 0x30;
+ cfg_tmp >>= 4;
+ do_serdes_enable(cfg_tmp, serdes3_base);
+#endif
/* Wait for at at least 625us, ensure the PLLs being reset are locked */
udelay(800);
@@ -422,6 +468,13 @@ int setup_serdes_volt(u32 svdd)
cfg_tmp >>= 2;
do_pll_lock(cfg_tmp, serdes2_base);
#endif
+
+#ifdef CONFIG_SYS_NXP_SRDS_3
+ cfg_tmp = cfg_rcwsrds3 & 0x30;
+ cfg_tmp >>= 4;
+ do_pll_lock(cfg_tmp, serdes3_base);
+#endif
+
/* Take the all enabled lanes out of reset */
#ifdef CONFIG_SYS_FSL_SRDS_1
do_enabled_lanes_reset(1, cfg_rcwsrds1, serdes1_base, true);
@@ -430,6 +483,10 @@ int setup_serdes_volt(u32 svdd)
do_enabled_lanes_reset(2, cfg_rcwsrds2, serdes2_base, true);
#endif
+#ifdef CONFIG_SYS_NXP_SRDS_3
+ do_enabled_lanes_reset(3, cfg_rcwsrds3, serdes3_base, true);
+#endif
+
/* For each PLL being reset, and achieved PLL lock set RST_DONE */
#ifdef CONFIG_SYS_FSL_SRDS_1
cfg_tmp = cfg_rcwsrds1 & 0x3;
@@ -441,6 +498,12 @@ int setup_serdes_volt(u32 svdd)
do_pll_reset_done(cfg_tmp, serdes2_base);
#endif
+#ifdef CONFIG_SYS_NXP_SRDS_3
+ cfg_tmp = cfg_rcwsrds3 & 0x30;
+ cfg_tmp >>= 4;
+ do_pll_reset_done(cfg_tmp, serdes3_base);
+#endif
+
return ret;
}
@@ -472,4 +535,12 @@ void fsl_serdes_init(void)
FSL_CHASSIS3_SRDS2_PRTCL_SHIFT,
serdes2_prtcl_map);
#endif
+#ifdef CONFIG_SYS_NXP_SRDS_3
+ serdes_init(NXP_SRDS_3,
+ CONFIG_SYS_FSL_LSCH3_SERDES_ADDR + NXP_SRDS_3 * 0x10000,
+ FSL_CHASSIS3_SRDS3_REGSR,
+ FSL_CHASSIS3_SRDS3_PRTCL_MASK,
+ FSL_CHASSIS3_SRDS3_PRTCL_SHIFT,
+ serdes3_prtcl_map);
+#endif
}
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
index 6981076..bec35e8 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
@@ -1,5 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
+ * Copyright 2018 NXP
* Copyright 2015 Freescale Semiconductor, Inc.
*/
@@ -57,6 +58,7 @@ enum srds_prtcl {
enum srds {
FSL_SRDS_1 = 0,
FSL_SRDS_2 = 1,
+ NXP_SRDS_3 = 2,
};
#elif defined(CONFIG_FSL_LSCH2)
enum srds_prtcl {
--
2.7.4
More information about the U-Boot
mailing list