[U-Boot] [PATCH 31/48] strider: Migrate to CONFIG_TARGET_STRIDER

[Mario Six]

Use the proper CONFIG_TARGET_STRIDER Kconfig option to replace the
CONFIG_STRIDER ad-hoc config option.

Signed-off-by: Mario Six <mario.six at gdsys.cc>
---
 board/gdsys/common/Makefile  | 4 ++--
 board/gdsys/mpc8308/Makefile | 2 +-
 include/configs/strider.h    | 1 -
 3 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/board/gdsys/common/Makefile b/board/gdsys/common/Makefile
index 91d446741c..aa1219a2e2 100644
--- a/board/gdsys/common/Makefile
+++ b/board/gdsys/common/Makefile
@@ -11,7 +11,7 @@ obj-$(CONFIG_IOCON) += osd.o mclink.o dp501.o phy.o ch7301.o
 obj-$(CONFIG_DLVISION_10G) += osd.o dp501.o
 obj-$(CONFIG_CONTROLCENTERD) += dp501.o
 obj-$(CONFIG_TARGET_HRCON) += osd.o mclink.o dp501.o phy.o ioep-fpga.o fanctrl.o
-obj-$(CONFIG_STRIDER) += mclink.o dp501.o phy.o ioep-fpga.o adv7611.o ch7301.o
-obj-$(CONFIG_STRIDER) += fanctrl.o
+obj-$(CONFIG_TARGET_STRIDER) += mclink.o dp501.o phy.o ioep-fpga.o adv7611.o ch7301.o
+obj-$(CONFIG_TARGET_STRIDER) += fanctrl.o
 obj-$(CONFIG_STRIDER_CON) += osd.o
 obj-$(CONFIG_STRIDER_CON_DP) += osd.o
diff --git a/board/gdsys/mpc8308/Makefile b/board/gdsys/mpc8308/Makefile
index f29376fc9e..dc579479f9 100644
--- a/board/gdsys/mpc8308/Makefile
+++ b/board/gdsys/mpc8308/Makefile
@@ -5,4 +5,4 @@
 
 obj-y := mpc8308.o sdram.o
 obj-$(CONFIG_TARGET_HRCON) += hrcon.o
-obj-$(CONFIG_STRIDER) += strider.o
+obj-$(CONFIG_TARGET_STRIDER) += strider.o
diff --git a/include/configs/strider.h b/include/configs/strider.h
index 9a025b255f..121edd7745 100644
--- a/include/configs/strider.h
+++ b/include/configs/strider.h
@@ -13,7 +13,6 @@
  */
 #define CONFIG_E300		1 /* E300 family */
 #define CONFIG_MPC83xx		1 /* MPC83xx family */
-#define CONFIG_STRIDER		1 /* STRIDER board specific */
 
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC83xx_ESDHC_ADDR
 
-- 
2.16.4