[U-Boot] [U-Boot, v2, 21/22] colibri_vf: use leveling evaluated by DDR validation tools

[sbabic at denx.de]

> From: Stefan Agner <stefan.agner at toradex.com>
> The DDR validation tool (which is part of Processor Expert) allows
> to evaluate leveling parameters for CR105/CR106/CR110. Several
> runs have been made with Colibri VF50 and VF61 and it seems to
> evaluate very similar values. Use this values by default.
> Note: The newly evaluated parameters seem to require CTLUPD_AREF
> to be enabled!
> Note 2: The tool also evaluated 6 as a new value for PHY02/18
> GATE_CFG (Coarse adjust of gate open time). However, this seems
> not to work in practise.
> Signed-off-by: Stefan Agner <stefan.agner at toradex.com>
> Acked-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>

Applied to u-boot-imx, -next, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================