[U-Boot] [PATCH 1/1] configs: tinker-rk3288 disable CONFIG_SPL_I2C_SUPPORT

[David Wu]

Hi Philipp,

This config does not look like it will be used in SPL and can be
deleted.

Reviewed-by: David Wu <david.wu at rock-chips.com>

在 2019/2/28 上午3:05, Heinrich Schuchardt 写道:
> The SPL for the Tinker Board has to fit into 32 KiB. Currently this limit
> is exceeded.
> 
> CONFIG_SPL_I2C_SUPPORT is not needed to move to main U-Boot. So let's
> disable it.
> 
> Suggested-by: David Wu <david.wu at rock-chips.com>
> Signed-off-by: Heinrich Schuchardt <xypron.glpk at gmx.de>
> ---
> This solves only one of the problems with the boards in v2019.04.
> The next problem is that reading the environment from MMC fails.
> 
> The patch
> [PATCH v3 1/1] configs: rk3288: Tinker Board SPL file must fit into 32 KiB
> https://lists.denx.de/pipermail/u-boot/2019-February/358883.html
> makes the problem visibe.
> ---
>   configs/tinker-rk3288_defconfig | 1 -
>   1 file changed, 1 deletion(-)
> 
> diff --git a/configs/tinker-rk3288_defconfig b/configs/tinker-rk3288_defconfig
> index 68adf7635bf..03a7f81d63d 100644
> --- a/configs/tinker-rk3288_defconfig
> +++ b/configs/tinker-rk3288_defconfig
> @@ -18,7 +18,6 @@ CONFIG_DEFAULT_FDT_FILE="rk3288-tinker.dtb"
>   CONFIG_DISPLAY_BOARDINFO_LATE=y
>   CONFIG_SPL_STACK_R=y
>   CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
> -CONFIG_SPL_I2C_SUPPORT=y
>   CONFIG_CMD_GPIO=y
>   CONFIG_CMD_GPT=y
>   CONFIG_CMD_I2C=y
>