[U-Boot] [PATCH 03/13 v3] serial: atmel_usart: Use fixed clock value in SPL version with DM_SERIAL

[Stefan Roese]

This patch adds an alterative SPL version of atmel_serial_enable_clk().
This enables the usage of this driver without full clock support (in
drivers and DT nodes). This saves some space in the SPL image.

Please note that this fixed clock support is only added to the SPL code
in the DM_SERIAL part of this file. All boards not using SPL & DM_SERIAL
should not be affected.

This patch also introduces CONFIG_SPL_UART_CLOCK for the fixed UART
input clock. It defaults to 132096000 for ARCH_AT91 but can be set to
a different value if needed.

Signed-off-by: Stefan Roese <sr at denx.de>
Cc: Heiko Schocher <hs at denx.de>
Cc: Andreas Bießmann <andreas at biessmann.org>
Cc: Eugen Hristev <eugen.hristev at microchip.com>
Reviewed-by: Heiko Schocher <hs at denx.de>
Tested on the taurus board:
Tested-by: Heiko Schocher <hs at denx.de>
---
v3:
- Depend fixed clock atmel_serial_enable_clk() function also on
  !CONFIG_SPL_CLK so that board with full clocj support in SPL
  can still use the normal function here
- Introcude CONFIG_SPL_UART_CLOCK and use this Kconfig option instead
  of the hardcoded value

v2:
- Reword patch subject and commit text to make it more clear, that
  this change only affects ports with SPL and DM_SERIAL enabled
  
 drivers/serial/Kconfig       |  9 +++++++++
 drivers/serial/atmel_usart.c | 12 ++++++++++++
 2 files changed, 21 insertions(+)

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 887cd687c0..d6bf8309d3 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -508,6 +508,15 @@ config ATMEL_USART
 	  configured in the device tree, and input clock frequency can
 	  be got from the clk node.
 
+config SPL_UART_CLOCK
+	int "SPL fixed UART input clock"
+	depends on SPL
+	default 132096000 if ARCH_AT91
+	help
+	  Provide a fixed clock value as input to the UART controller. This
+	  might be needed on platforms which can't enable CONFIG_SPL_CLK
+	  because of SPL image size restirctions.
+
 config BCM283X_MU_SERIAL
 	bool "Support for BCM283x Mini-UART"
 	depends on DM_SERIAL && ARCH_BCM283X
diff --git a/drivers/serial/atmel_usart.c b/drivers/serial/atmel_usart.c
index aa8cdff840..c450a4e08a 100644
--- a/drivers/serial/atmel_usart.c
+++ b/drivers/serial/atmel_usart.c
@@ -218,6 +218,17 @@ static const struct dm_serial_ops atmel_serial_ops = {
 	.setbrg = atmel_serial_setbrg,
 };
 
+#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_CLK)
+static int atmel_serial_enable_clk(struct udevice *dev)
+{
+	struct atmel_serial_priv *priv = dev_get_priv(dev);
+
+	/* Use fixed clock value in SPL */
+	priv->usart_clk_rate = CONFIG_SPL_UART_CLOCK;
+
+	return 0;
+}
+#else
 static int atmel_serial_enable_clk(struct udevice *dev)
 {
 	struct atmel_serial_priv *priv = dev_get_priv(dev);
@@ -245,6 +256,7 @@ static int atmel_serial_enable_clk(struct udevice *dev)
 
 	return 0;
 }
+#endif
 
 static int atmel_serial_probe(struct udevice *dev)
 {
-- 
2.21.0