[U-Boot] [PATCH 06/13 v3] arm: at91: Remove CONFIG_AT91_HW_WDT_TIMEOUT

[Stefan Roese]

This patch removes the CONFIG_AT91_HW_WDT_TIMEOUT as its not needed any
more. The WD timeout value can be provided via the "timeout-sec" DT
property. If not provided this way, the default value of 2 seconds will
be used.

Signed-off-by: Stefan Roese <sr at denx.de>
Cc: Heiko Schocher <hs at denx.de>
Cc: Andreas Bießmann <andreas at biessmann.org>
Cc: Eugen Hristev <eugen.hristev at microchip.com>
---
v3:
- New patch

 README                          | 3 ---
 configs/smartweb_defconfig      | 1 -
 configs/taurus_defconfig        | 1 -
 drivers/watchdog/Kconfig        | 4 ----
 drivers/watchdog/at91sam9_wdt.c | 2 --
 5 files changed, 11 deletions(-)

diff --git a/README b/README
index c9a20db34f..a514f48cae 100644
--- a/README
+++ b/README
@@ -767,9 +767,6 @@ The following options need to be configured:
 		SoC, then define this variable and provide board
 		specific code for the "hw_watchdog_reset" function.
 
-		CONFIG_AT91_HW_WDT_TIMEOUT
-		specify the timeout in seconds. default 2 seconds.
-
 - Real-Time Clock:
 
 		When CONFIG_CMD_DATE is selected, the type of the RTC
diff --git a/configs/smartweb_defconfig b/configs/smartweb_defconfig
index 7c7220afc8..807a569121 100644
--- a/configs/smartweb_defconfig
+++ b/configs/smartweb_defconfig
@@ -59,6 +59,5 @@ CONFIG_USB_ETHER_ASIX=y
 CONFIG_USB_ETHER_MCS7830=y
 CONFIG_WDT=y
 CONFIG_WDT_AT91=y
-CONFIG_AT91_HW_WDT_TIMEOUT=y
 CONFIG_SPL_TINY_MEMSET=y
 # CONFIG_EFI_LOADER is not set
diff --git a/configs/taurus_defconfig b/configs/taurus_defconfig
index 022b0b6da1..d69f4895ef 100644
--- a/configs/taurus_defconfig
+++ b/configs/taurus_defconfig
@@ -62,5 +62,4 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0x02d2
 CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_WDT=y
 CONFIG_WDT_AT91=y
-CONFIG_AT91_HW_WDT_TIMEOUT=y
 CONFIG_USE_TINY_PRINTF=y
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 115fc4551f..34e78beb2a 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -139,10 +139,6 @@ config WDT_AT91
 	   Select this to enable Microchip watchdog timer, which can be found on
 	   some AT91 devices.
 
-config AT91_HW_WDT_TIMEOUT
-	bool "AT91 watchdog timeout specified"
-	depends on WDT_AT91
-
 config WDT_MT7621
 	bool "MediaTek MT7621 watchdog timer support"
 	depends on WDT && ARCH_MT7620
diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c
index b0a3b4ed58..1c71778bdc 100644
--- a/drivers/watchdog/at91sam9_wdt.c
+++ b/drivers/watchdog/at91sam9_wdt.c
@@ -117,11 +117,9 @@ static int at91_wdt_probe(struct udevice *dev)
 	if (!priv->regs)
 		return -EINVAL;
 
-#ifdef CONFIG_AT91_HW_WDT_TIMEOUT
 	priv->timeout = dev_read_u32_default(dev, "timeout-sec",
 					     WDT_DEFAULT_TIMEOUT);
 	debug("%s: timeout %d", __func__, priv->timeout);
-#endif
 
 	debug("%s: Probing wdt%u\n", __func__, dev->seq);
 
-- 
2.21.0