[U-Boot] [PATCH v2 09/10] configs: icore_mipi: Enable CLK

[Jagan Teki]

Now, clock driver available for i.MX6Q so enable the CLK
in SPL and U-Boot proper for Engicam i.CoreM6 MIPI boards.

Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
 configs/imx6qdl_icore_mipi_defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/configs/imx6qdl_icore_mipi_defconfig b/configs/imx6qdl_icore_mipi_defconfig
index 7a0e5169b6..bb5e0d3abd 100644
--- a/configs/imx6qdl_icore_mipi_defconfig
+++ b/configs/imx6qdl_icore_mipi_defconfig
@@ -8,6 +8,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_TARGET_MX6Q_ENGICAM=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL=y
+CONFIG_SPL_CLK=y
 CONFIG_DEBUG_UART_BASE=0x021f0000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_LIBDISK_SUPPORT=y
@@ -44,6 +45,7 @@ CONFIG_DEFAULT_DEVICE_TREE="imx6q-icore-mipi"
 CONFIG_OF_LIST="imx6q-icore-mipi imx6dl-icore-mipi"
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_I2C_MXC=y
+CONFIG_CLK=y
 CONFIG_FSL_ESDHC=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_SMSC=y
-- 
2.18.0.321.gffc6fa0e3