[U-Boot] [PATCH 6/8] rockchip: rk3288: split evb into its two entities

Heiko Stuebner heiko at sntech.de
Fri Apr 5 08:30:11 UTC 2019


There are actual 2 variants of the rk3288-evb in existence, mainly
differing by their pmic. The one currently in u-boot is using the
act8846 + syr827 ics for power regulation, while the other variant
uses Rockchip's own rk808.

To be able to use u-boot on both, add separate configs and sync down
the devicetrees from the Linux kernel for both variants.

As per [0] the SPDX license designation updated a bit as well
to match the actual licensing.

[0] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=fce152a63d9597c108c10a0eb7a71f1edfc9d42e

Signed-off-by: Heiko Stuebner <heiko at sntech.de>
---
 arch/arm/dts/Makefile                         |   3 +-
 ...evb.dts => rk3288-evb-act8846-u-boot.dtsi} |  33 +-
 arch/arm/dts/rk3288-evb-act8846.dts           | 188 +++++++
 arch/arm/dts/rk3288-evb-rk808-u-boot.dtsi     |  40 ++
 arch/arm/dts/rk3288-evb-rk808.dts             | 202 +++++++
 arch/arm/dts/rk3288-evb.dtsi                  | 493 ++++++++----------
 ...defconfig => evb-rk3288-act8846_defconfig} |   4 +-
 configs/evb-rk3288-rk808_defconfig            |  87 ++++
 8 files changed, 738 insertions(+), 312 deletions(-)
 rename arch/arm/dts/{rk3288-evb.dts => rk3288-evb-act8846-u-boot.dtsi} (64%)
 create mode 100644 arch/arm/dts/rk3288-evb-act8846.dts
 create mode 100644 arch/arm/dts/rk3288-evb-rk808-u-boot.dtsi
 create mode 100644 arch/arm/dts/rk3288-evb-rk808.dts
 rename configs/{evb-rk3288_defconfig => evb-rk3288-act8846_defconfig} (95%)
 create mode 100644 configs/evb-rk3288-rk808_defconfig

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 0e2ffdb87f..edbfc34076 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -65,7 +65,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rk3128-evb.dtb \
 	rk3188-radxarock.dtb \
 	rk3229-evb.dtb \
-	rk3288-evb.dtb \
+	rk3288-evb-act8846.dtb \
+	rk3288-evb-rk808.dtb \
 	rk3288-fennec.dtb \
 	rk3288-firefly.dtb \
 	rk3288-miqi.dtb \
diff --git a/arch/arm/dts/rk3288-evb.dts b/arch/arm/dts/rk3288-evb-act8846-u-boot.dtsi
similarity index 64%
rename from arch/arm/dts/rk3288-evb.dts
rename to arch/arm/dts/rk3288-evb-act8846-u-boot.dtsi
index 575de44c05..ee49d3787d 100644
--- a/arch/arm/dts/rk3288-evb.dts
+++ b/arch/arm/dts/rk3288-evb-act8846-u-boot.dtsi
@@ -1,20 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0+ OR X11
+// SPDX-License-Identifier: GPL-2.0+
 /*
- * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
  */
 
-/dts-v1/;
-#include "rk3288-evb.dtsi"
-
-/ {
-	model = "Evb-RK3288";
-	compatible = "evb-rk3288,evb-rk3288", "rockchip,rk3288";
-
-	chosen {
-		stdout-path = &uart2;
-	};
-};
-
 &dmc {
 	rockchip,pctl-timing = <0x215 0xc8 0x0 0x35 0x26 0x2 0x70 0x2000d
 		0x6 0x0 0x8 0x4 0x17 0x24 0xd 0x6
@@ -26,31 +14,26 @@
 	rockchip,sdram-params = <0x20d266a4 0x5b6 2 533000000 6 9 0>;
 };
 
-&pinctrl {
+&sdmmc {
 	u-boot,dm-pre-reloc;
 };
 
-&pwm1 {
-	status = "okay";
-};
-
-&uart2 {
+&emmc {
 	u-boot,dm-pre-reloc;
-	reg-shift = <2>;
 };
 
-&sdmmc {
+&gpio3 {
 	u-boot,dm-pre-reloc;
 };
 
-&emmc {
+&gpio8 {
 	u-boot,dm-pre-reloc;
 };
 
-&gpio3 {
+&pinctrl {
 	u-boot,dm-pre-reloc;
 };
 
-&gpio8 {
+&uart2 {
 	u-boot,dm-pre-reloc;
 };
diff --git a/arch/arm/dts/rk3288-evb-act8846.dts b/arch/arm/dts/rk3288-evb-act8846.dts
new file mode 100644
index 0000000000..6204f8ce8f
--- /dev/null
+++ b/arch/arm/dts/rk3288-evb-act8846.dts
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include "rk3288-evb.dtsi"
+#include "rk3288-evb-act8846-u-boot.dtsi"
+
+/ {
+	compatible = "rockchip,rk3288-evb-act8846", "rockchip,rk3288";
+
+	vcc_lcd: vcc-lcd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_en>;
+		regulator-name = "vcc_lcd";
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_wl: vcc-wl {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pwr>;
+		regulator-name = "vcc_wl";
+		vin-supply = <&vcc_18>;
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	vdd_cpu: syr827 at 40 {
+		compatible = "silergy,syr827";
+		fcs,suspend-voltage-selector = <1>;
+		reg = <0x40>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vdd_gpu: syr828 at 41 {
+		compatible = "silergy,syr828";
+		fcs,suspend-voltage-selector = <1>;
+		reg = <0x41>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <850000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	hym8563 at 51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+	};
+
+	act8846: act8846 at 5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		status = "okay";
+
+		vp1-supply = <&vcc_sys>;
+		vp2-supply = <&vcc_sys>;
+		vp3-supply = <&vcc_sys>;
+		vp4-supply = <&vcc_sys>;
+		inl1-supply = <&vcc_io>;
+		inl2-supply = <&vcc_sys>;
+		inl3-supply = <&vcc_20>;
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "VCC_DDR";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vcc_io: REG2 {
+				regulator-name = "VCC_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG3 {
+				regulator-name = "VDD_LOG";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+
+			vcc_20: REG4 {
+				regulator-name = "VCC_20";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			vccio_sd: REG5 {
+				regulator-name = "VCCIO_SD";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd10_lcd: REG6 {
+				regulator-name = "VDD10_LCD";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcca_codec: REG7 {
+				regulator-name = "VCCA_CODEC";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcc_tp: REG8 {
+				regulator-name = "VCCA_TP";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vccio_pmu: REG9 {
+				regulator-name = "VCCIO_PMU";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_10: REG10 {
+				regulator-name = "VDD_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vcc_18: REG11 {
+				regulator-name = "VCC_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc18_lcd: REG12 {
+				regulator-name = "VCC18_LCD";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&panel {
+	power-supply = <&vcc_lcd>;
+};
+
+&pinctrl {
+	lcd {
+		lcd_en: lcd-en  {
+			rockchip,pins = <7 3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_pwr: wifi-pwr {
+			rockchip,pins = <7 9 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm/dts/rk3288-evb-rk808-u-boot.dtsi b/arch/arm/dts/rk3288-evb-rk808-u-boot.dtsi
new file mode 100644
index 0000000000..3822526512
--- /dev/null
+++ b/arch/arm/dts/rk3288-evb-rk808-u-boot.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+&dmc {
+	rockchip,pctl-timing = <0x29a 0xc8 0x1f8 0x42 0x4e 0x4 0xea 0xa
+		0x5 0x0 0xa 0x7 0x19 0x24 0xa 0x7
+		0x5 0xa 0x5 0x200 0x5 0x10 0x40 0x0
+		0x1 0x7 0x7 0x4 0xc 0x43 0x100 0x0
+		0x5 0x0>;
+	rockchip,phy-timing = <0x48f9aab4 0xea0910 0x1002c200
+		0xa60 0x40 0x10 0x0>;
+	/* Add a dummy value to cause of-platdata think this is bytes */
+	rockchip,sdram-params = <0x30B25564 0x627 3 666000000 3 9 1>;
+};
+
+&sdmmc {
+	u-boot,dm-pre-reloc;
+};
+
+&emmc {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio3 {
+	u-boot,dm-pre-reloc;
+};
+
+&gpio8 {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl {
+	u-boot,dm-pre-reloc;
+};
+
+&uart2 {
+	u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/rk3288-evb-rk808.dts b/arch/arm/dts/rk3288-evb-rk808.dts
new file mode 100644
index 0000000000..76d43a2819
--- /dev/null
+++ b/arch/arm/dts/rk3288-evb-rk808.dts
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include "rk3288-evb.dtsi"
+#include "rk3288-evb-rk808-u-boot.dtsi"
+
+/ {
+	compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	rk808: pmic at 1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int &global_pwroff>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "xin32k", "rk808-clkout2";
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_18>;
+		vcc9-supply = <&vcc_io>;
+		vcc10-supply = <&vcc_io>;
+		vcc11-supply = <&vcc_sys>;
+		vcc12-supply = <&vcc_io>;
+		vddio-supply = <&vccio_pmu>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-name = "vdd_arm";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-name = "vdd_gpu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_ddr";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_io";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vccio_pmu: LDO_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_pmu";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_tp: LDO_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_tp";
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd_10";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc18_lcd: LDO_REG4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vccio_sd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd10_lcd: LDO_REG6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-name = "vdd10_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc_18";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca_codec: LDO_REG8 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcca_codec";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_wl: SWITCH_REG1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_wl";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_lcd: SWITCH_REG2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-name = "vcc_lcd";
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&panel {
+	power-supply = <&vcc_lcd>;
+};
diff --git a/arch/arm/dts/rk3288-evb.dtsi b/arch/arm/dts/rk3288-evb.dtsi
index 04902c0bd3..21dfe13171 100644
--- a/arch/arm/dts/rk3288-evb.dtsi
+++ b/arch/arm/dts/rk3288-evb.dtsi
@@ -1,92 +1,58 @@
-// SPDX-License-Identifier: GPL-2.0+ OR X11
-/*
- * (C) Copyright 2016 Rockchip Electronics Co., Ltd
- */
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
 #include "rk3288.dtsi"
 
 / {
-	memory {
-		reg = <0 0x80000000>;
+	chosen {
+		stdout-path = &uart2;
 	};
 
-	ext_gmac: external-gmac-clock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <125000000>;
-		clock-output-names = "ext_gmac";
+	memory at 0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
-	keys: gpio-keys {
-		compatible = "gpio-keys";
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
 
-		button at 0 {
-			gpio-key,wakeup = <1>;
-			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
-			label = "GPIO Power";
-			linux,code = <116>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pwr_key>;
+		button-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <100000>;
 		};
-	};
-
-	vcc_sys: vsys-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_sys";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
 
-	vcc_flash: flash-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_flash";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc_io>;
-	};
+		button-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <300000>;
+		};
 
-	vcc_5v: usb-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_5v";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc_sys>;
-	};
+		menu {
+			label = "Menu";
+			linux,code = <KEY_MENU>;
+			press-threshold-microvolt = <640000>;
+		};
 
-	vcc_host_5v: usb-host-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&host_vbus_drv>;
-		regulator-name = "vcc_host_5v";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		vin-supply = <&vcc_5v>;
-	};
+		esc {
+			label = "Esc";
+			linux,code = <KEY_ESC>;
+			press-threshold-microvolt = <1000000>;
+		};
 
-	vcc_otg_5v: usb-otg-regulator {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&otg_vbus_drv>;
-		regulator-name = "vcc_otg_5v";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		vin-supply = <&vcc_5v>;
+		home  {
+			label = "Home";
+			linux,code = <KEY_HOME>;
+			press-threshold-microvolt = <1300000>;
+		};
 	};
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		power-supply = <&vcc_sys>;
-		enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
 		brightness-levels = <
 			  0   1   2   3   4   5   6   7
 			  8   9  10  11  12  13  14  15
@@ -120,12 +86,35 @@
 			232 233 234 235 236 237 238 239
 			240 241 242 243 244 245 246 247
 			248 249 250 251 252 253 254 255>;
-		default-brightness-level = <50>;
-		pwms = <&pwm0 0 25000 0>;
+		default-brightness-level = <128>;
+		enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&pwm0_pin>;
-		pwm-delay-us = <10000>;
-		status = "disabled";
+		pinctrl-0 = <&bl_en>;
+		pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>;
+	};
+
+	ext_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "ext_gmac";
+		#clock-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwrbtn>;
+
+		power {
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "GPIO Key Power";
+			linux,input-type = <1>;
+			wakeup-source;
+			debounce-interval = <100>;
+		};
 	};
 
 	panel: panel {
@@ -135,6 +124,57 @@
 		enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
 		status = "disabled";
 	};
+
+	/* This turns on USB vbus for both host0 (ehci) and host1 (dwc2) */
+	vcc_host: vcc-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "vcc_host";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_phy: vcc-phy-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&eth_phy_pwr>;
+		regulator-name = "vcc_phy";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_sys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/*
+	 * NOTE: vcc_sd isn't hooked up on v1.0 boards where power comes from
+	 * vcc_io directly.  Those boards won't be able to power cycle SD cards
+	 * but it shouldn't hurt to toggle this pin there anyway.
+	 */
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
 };
 
 &cpu0 {
@@ -142,21 +182,38 @@
 };
 
 &emmc {
-	broken-cd;
 	bus-width = <8>;
 	cap-mmc-highspeed;
 	disable-wp;
 	non-removable;
-	num-slots = <1>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_18>;
 	status = "okay";
 };
 
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;			/* wp not hooked up */
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	status = "okay";
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
+};
+
 &gmac {
+	phy-supply = <&vcc_phy>;
 	phy-mode = "rgmii";
 	clock_in_out = "input";
-	snps,reset-gpio = <&gpio4 7 0>;
+	snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
 	snps,reset-active-low;
 	snps,reset-delays-us = <0 10000 1000000>;
 	assigned-clocks = <&cru SCLK_MAC>;
@@ -165,6 +222,11 @@
 	pinctrl-0 = <&rgmii_pins>;
 	tx_delay = <0x30>;
 	rx_delay = <0x10>;
+	status = "ok";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
 	status = "okay";
 };
 
@@ -174,253 +236,124 @@
 };
 
 &i2c0 {
-	clock-frequency = <400000>;
 	status = "okay";
+};
 
-	vdd_cpu: syr827 at 40 {
-		compatible = "silergy,syr827";
-		fcs,suspend-voltage-selector = <1>;
-		reg = <0x40>;
-		regulator-name = "vdd_cpu";
-		regulator-min-microvolt = <850000>;
-		regulator-max-microvolt = <1350000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc_sys>;
-	};
+&i2c5 {
+	status = "okay";
+};
 
-	vdd_gpu: syr828 at 41 {
-		compatible = "silergy,syr828";
-		fcs,suspend-voltage-selector = <1>;
-		reg = <0x41>;
-		regulator-name = "vdd_gpu";
-		regulator-min-microvolt = <850000>;
-		regulator-max-microvolt = <1350000>;
-		regulator-always-on;
-		vin-supply = <&vcc_sys>;
-	};
+&wdt {
+	status = "okay";
+};
 
-	hym8563: hym8563 at 51 {
-		compatible = "haoyu,hym8563";
-		reg = <0x51>;
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		clock-output-names = "xin32k";
-		interrupt-parent = <&gpio7>;
-		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&rtc_int>;
-	};
+&pwm0 {
+	status = "okay";
+};
 
-	act8846: act8846 at 5a {
-		compatible = "active-semi,act8846";
-		reg = <0x5a>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwr_hold>;
-		system-power-controller;
-
-		regulators {
-			vcc_ddr: REG1 {
-				regulator-name = "vcc_ddr";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			vcc_io: REG2 {
-				regulator-name = "vcc_io";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_log: REG3 {
-				regulator-name = "vdd_log";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			vcc_20: REG4 {
-				regulator-name = "vcc_20";
-				regulator-min-microvolt = <2000000>;
-				regulator-max-microvolt = <2000000>;
-				regulator-always-on;
-			};
-
-			vccio_sd: REG5 {
-				regulator-name = "vccio_sd";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd10_lcd: REG6 {
-				regulator-name = "vdd10_lcd";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			vcca_codec: REG7 {
-				regulator-name = "vcca_codec";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vcc_tp: REG8 {
-				regulator-name = "vcca_33";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vccio_pmu: REG9 {
-				regulator-name = "vccio_pmu";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			vdd_10: REG10 {
-				regulator-name = "vdd_10";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			vcc_18: REG11 {
-				regulator-name = "vcc_18";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			vcc18_lcd: REG12 {
-				regulator-name = "vcc18_lcd";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-		};
-	};
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
 };
 
-&i2c1 {
+&uart2 {
 	status = "okay";
 };
 
-&i2c2 {
+&uart3 {
 	status = "okay";
 };
 
-&i2c4 {
+&uart4 {
 	status = "okay";
 };
 
-&i2c5 {
+&tsadc {
+	rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
 	status = "okay";
 };
 
 &pinctrl {
-	pcfg_output_high: pcfg-output-high {
-		output-high;
+	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+		drive-strength = <8>;
 	};
 
-	pcfg_output_low: pcfg-output-low {
-		output-low;
+	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+		bias-pull-up;
+		drive-strength = <8>;
 	};
 
-	act8846 {
-		pwr_hold: pwr-hold {
-			rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_output_high>;
+	backlight {
+		bl_en: bl-en {
+			rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
-	hym8563 {
-		rtc_int: rtc-int {
-			rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>;
+	buttons {
+		pwrbtn: pwrbtn {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
-	keys {
-		pwr_key: pwr-key {
-			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+	lcd {
+		lcd_cs: lcd-cs {
+			rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	sdmmc {
+		/*
+		 * Default drive strength isn't enough to achieve even
+		 * high-speed mode on EVB board so bump up to 8ma.
+		 */
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+					<6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+		};
+
 		sdmmc_pwr: sdmmc-pwr {
 			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
-	usb_host {
+	usb {
 		host_vbus_drv: host-vbus-drv {
 			rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
-	usb_otg {
-		otg_vbus_drv: otg-vbus-drv {
-			rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>;
+	eth_phy {
+		eth_phy_pwr: eth-phy-pwr {
+			rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 };
 
-&pwm0 {
+&usbphy {
 	status = "okay";
 };
 
-&saradc {
-	vref-supply = <&vcc_18>;
-	status = "okay";
-};
-
-&sdio0 {
-	broken-cd;
-	bus-width = <4>;
-	disable-wp;
-	non-removable;
-	num-slots = <1>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>;
-	vmmc-supply = <&vcc_18>;
-	status = "disabled";
-};
-
-&sdmmc {
-	bus-width = <4>;
-	cap-mmc-highspeed;
-	cap-sd-highspeed;
-	card-detect-delay = <200>;
-	disable-wp;
-	num-slots = <1>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
-	vmmc-supply = <&vccio_sd>;
-	status = "okay";
-};
-
-&spi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_clk>, <&spi0_cs0>, <&spi0_tx>, <&spi0_rx>, <&spi0_cs1>;
-	status = "okay";
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
-	status = "okay";
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-};
-
-&uart3 {
+&usb_host0_ehci {
 	status = "okay";
 };
 
@@ -428,10 +361,6 @@
 	status = "okay";
 };
 
-&usb_otg {
-	status = "okay";
-};
-
 &vopb {
 	status = "okay";
 };
@@ -470,7 +399,3 @@
 		};
 	};
 };
-
-&wdt {
-	status = "okay";
-};
diff --git a/configs/evb-rk3288_defconfig b/configs/evb-rk3288-act8846_defconfig
similarity index 95%
rename from configs/evb-rk3288_defconfig
rename to configs/evb-rk3288-act8846_defconfig
index 8635fd9aaf..878367dea9 100644
--- a/configs/evb-rk3288_defconfig
+++ b/configs/evb-rk3288-act8846_defconfig
@@ -12,7 +12,7 @@ CONFIG_DEBUG_UART=y
 CONFIG_NR_DRAM_BANKS=1
 # CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_SILENT_CONSOLE=y
-CONFIG_DEFAULT_FDT_FILE="rk3288-evb-rk808.dtb"
+CONFIG_DEFAULT_FDT_FILE="rk3288-evb-act8846.dtb"
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_STACK_R=y
@@ -33,7 +33,7 @@ CONFIG_CMD_REGULATOR=y
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_SPL_PARTITION_UUIDS=y
 CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="rk3288-evb"
+CONFIG_DEFAULT_DEVICE_TREE="rk3288-evb-act8846"
 CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_NET_RANDOM_ETHADDR=y
diff --git a/configs/evb-rk3288-rk808_defconfig b/configs/evb-rk3288-rk808_defconfig
new file mode 100644
index 0000000000..0cc1b2f601
--- /dev/null
+++ b/configs/evb-rk3288-rk808_defconfig
@@ -0,0 +1,87 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00000000
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_ROCKCHIP_RK3288=y
+CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y
+CONFIG_TARGET_EVB_RK3288=y
+CONFIG_DEBUG_UART_BASE=0xff690000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_STACK_R_ADDR=0x80000
+CONFIG_DEBUG_UART=y
+CONFIG_NR_DRAM_BANKS=1
+# CONFIG_ANDROID_BOOT_IMAGE is not set
+CONFIG_SILENT_CONSOLE=y
+CONFIG_DEFAULT_FDT_FILE="rk3288-evb-rk808.dtb"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SPL_PARTITION_UUIDS=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3288-evb-rk808"
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_SPI_FLASH=y
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_DM_PMIC=y
+# CONFIG_SPL_PMIC_CHILDREN is not set
+CONFIG_PMIC_RK8XX=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RAM=y
+CONFIG_SPL_RAM=y
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYSRESET=y
+CONFIG_USB=y
+CONFIG_USB_DWC2=y
+CONFIG_ROCKCHIP_USB2_PHY=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
+CONFIG_USB_GADGET_VENDOR_NUM=0x2207
+CONFIG_USB_GADGET_PRODUCT_NUM=0x320a
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_USB_FUNCTION_MASS_STORAGE=y
+CONFIG_DM_VIDEO=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_ROCKCHIP=y
+CONFIG_VIDEO_ROCKCHIP_MAX_YRES=1200
+CONFIG_DISPLAY_ROCKCHIP_MIPI=y
+CONFIG_USE_TINY_PRINTF=y
+CONFIG_CMD_DHRYSTONE=y
+CONFIG_ERRNO_STR=y
-- 
2.20.1



More information about the U-Boot mailing list