[U-Boot] [PATCH 16/16] stm32mp1: add stusb1600 support for DK1 and DK2 board
Lukasz Majewski
lukma at denx.de
Mon Apr 8 22:04:53 UTC 2019
On Fri, 29 Mar 2019 15:42:24 +0100
Patrick Delaunay <patrick.delaunay at st.com> wrote:
> The DK1 and DK2 boards use the USB Type-C controller STUSB1600.
> This patch updates:
> - the device tree to add the I2C node in the DT
> - the board stm32mp1 to probe this I2C device and use this controller
> to check cable detection.
> - the DWC2 driver to support a new dt property
> "u-boot,force-b-session-valid" which forces B session and
> device mode; it is a workaround because the VBUS sensing and
> ID detection isn't available with stusb1600.
>
> Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
> ---
>
> arch/arm/dts/stm32mp157-pinctrl.dtsi | 7 ++++
> arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi | 2 +-
> arch/arm/dts/stm32mp157a-dk1.dts | 18 ++++++++++
> board/st/stm32mp1/stm32mp1.c | 56
> ++++++++++++++++++++++++++++++++
> doc/device-tree-bindings/usb/dwc2.txt | 2 ++
> drivers/usb/gadget/dwc2_udc_otg.c | 8 +++-- 6 files changed,
> 90 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/dts/stm32mp157-pinctrl.dtsi
> b/arch/arm/dts/stm32mp157-pinctrl.dtsi index 867d244..1962267 100644
> --- a/arch/arm/dts/stm32mp157-pinctrl.dtsi
> +++ b/arch/arm/dts/stm32mp157-pinctrl.dtsi
> @@ -380,6 +380,13 @@
> };
> };
>
> + stusb1600_pins_a: stusb1600-0 {
> + pins {
> + pinmux = <STM32_PINMUX('I',
> 11, ANALOG)>;
> + bias-pull-up;
> + };
> + };
> +
> uart4_pins_a: uart4-0 {
> pins1 {
> pinmux = <STM32_PINMUX('G',
> 11, AF6)>; /* UART4_TX */ diff --git
> a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi
> b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi index 7e2c5d0..0f32a38
> 100644 --- a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi +++
> b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi @@ -191,7 +191,7 @@
> };
>
> &usbotg_hs {
> - force-b-session-valid;
> + u-boot,force-b-session-valid;
> hnp-srp-disable;
> };
>
> diff --git a/arch/arm/dts/stm32mp157a-dk1.dts
> b/arch/arm/dts/stm32mp157a-dk1.dts index b8ef820..e36773d 100644
> --- a/arch/arm/dts/stm32mp157a-dk1.dts
> +++ b/arch/arm/dts/stm32mp157a-dk1.dts
> @@ -67,6 +67,24 @@
> /delete-property/dmas;
> /delete-property/dma-names;
>
> + typec: stusb1600 at 28 {
> + compatible = "st,stusb1600";
> + reg = <0x28>;
> + interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
> + interrupt-parent = <&gpioi>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&stusb1600_pins_a>;
> +
> + status = "okay";
> +
> + typec_con: connector {
> + compatible = "usb-c-connector";
> + label = "USB-C";
> + power-role = "sink";
> + power-opmode = "default";
> + };
> + };
> +
> pmic: stpmic at 33 {
> compatible = "st,stpmic1";
> reg = <0x33>;
> diff --git a/board/st/stm32mp1/stm32mp1.c
> b/board/st/stm32mp1/stm32mp1.c index 58b6d78..23737ce 100644
> --- a/board/st/stm32mp1/stm32mp1.c
> +++ b/board/st/stm32mp1/stm32mp1.c
> @@ -9,15 +9,18 @@
> #include <dm.h>
> #include <g_dnl.h>
> #include <generic-phy.h>
> +#include <i2c.h>
> #include <led.h>
> #include <misc.h>
> #include <phy.h>
> #include <reset.h>
> #include <syscon.h>
> +#include <usb.h>
> #include <asm/io.h>
> #include <asm/gpio.h>
> #include <asm/arch/stm32.h>
> #include <power/regulator.h>
> +#include <usb/dwc2_udc.h>
>
> /* SYSCFG registers */
> #define SYSCFG_BOOTR 0x00
> @@ -151,11 +154,64 @@ static void board_key_check(void)
>
> #if defined(CONFIG_USB_GADGET) && defined(CONFIG_USB_GADGET_DWC2_OTG)
>
> +/* STMicroelectronics STUSB1600 Type-C controller */
> +#define STUSB1600_CC_CONNECTION_STATUS 0x0E
> +
> +/* STUSB1600_CC_CONNECTION_STATUS bitfields */
> +#define STUSB1600_CC_ATTACH BIT(0)
> +
> +static int stusb1600_init(struct udevice **dev_stusb1600)
> +{
> + ofnode node;
> + struct udevice *dev, *bus;
> + int ret;
> + u32 chip_addr;
> +
> + *dev_stusb1600 = NULL;
> +
> + /* if node stusb1600 is present, means DK1 or DK2 board */
> + node = ofnode_by_compatible(ofnode_null(), "st,stusb1600");
> + if (!ofnode_valid(node))
> + return -ENODEV;
> +
> + ret = ofnode_read_u32(node, "reg", &chip_addr);
> + if (ret)
> + return -EINVAL;
> +
> + ret = uclass_get_device_by_ofnode(UCLASS_I2C,
> ofnode_get_parent(node),
> + &bus);
> + if (ret) {
> + printf("bus for stusb1600 not found\n");
> + return -ENODEV;
> + }
> +
> + ret = dm_i2c_probe(bus, chip_addr, 0, &dev);
> + if (!ret)
> + *dev_stusb1600 = dev;
> +
> + return ret;
> +}
> +
> +static int stusb1600_cable_connected(struct udevice *dev)
> +{
> + u8 status;
> +
> + if (dm_i2c_read(dev, STUSB1600_CC_CONNECTION_STATUS,
> &status, 1))
> + return 0;
> +
> + return status & STUSB1600_CC_ATTACH;
> +}
> +
> +#include <usb/dwc2_udc.h>
> int g_dnl_board_usb_cable_connected(void)
> {
> + struct udevice *stusb1600;
> struct udevice *dwc2_udc_otg;
> int ret;
>
> + if (!stusb1600_init(&stusb1600))
> + return stusb1600_cable_connected(stusb1600);
> +
> ret = uclass_get_device_by_driver(UCLASS_USB_GADGET_GENERIC,
> DM_GET_DRIVER(dwc2_udc_otg),
> &dwc2_udc_otg);
> diff --git a/doc/device-tree-bindings/usb/dwc2.txt
> b/doc/device-tree-bindings/usb/dwc2.txt index eb60ffa..61493f7 100644
> --- a/doc/device-tree-bindings/usb/dwc2.txt
> +++ b/doc/device-tree-bindings/usb/dwc2.txt
> @@ -39,6 +39,8 @@ Refer to phy/phy-bindings.txt for generic phy
> consumer properties
> - g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0)
> in gadget mode.
> - usb33d-supply: external VBUS and ID sensing comparators supply, in
> order to perform OTG operation, used on STM32MP1 SoCs.
> +- u-boot,force-b-session-valid: force B-peripheral session instead
> of relying on
> + VBUS sensing (only valid when dr_mode = "peripheral" and for
> u-boot).
> Deprecated properties:
> - g-use-dma: gadget DMA mode is automatically detected
> diff --git a/drivers/usb/gadget/dwc2_udc_otg.c
> b/drivers/usb/gadget/dwc2_udc_otg.c index 3fdaa10..494ab53 100644
> --- a/drivers/usb/gadget/dwc2_udc_otg.c
> +++ b/drivers/usb/gadget/dwc2_udc_otg.c
> @@ -1053,7 +1053,7 @@ static int
> dwc2_udc_otg_ofdata_to_platdata(struct udevice *dev)
> platdata->tx_fifo_sz = dev_read_u32_default(dev, "g-tx-fifo-size",
> 0); platdata->force_b_session_valid =
> - dev_read_bool(dev, "force-b-session-valid");
> + dev_read_bool(dev, "u-boot,force-b-session-valid");
>
> /* force platdata according compatible */
> drvdata = dev_get_driver_data(dev);
> @@ -1075,6 +1075,9 @@ static void
> dwc2_set_stm32mp1_hsotg_params(struct dwc2_plat_otg_data *p) | 0 <<
> 8 /* [0:SRP disable 1:SRP enable]*/ | 0 << 6 /* 0: high
> speed utmi+, 1: full speed serial*/ | 0x7 << 0; /* FS timeout
> calibration**/ +
> + if (p->force_b_session_valid)
> + p->usb_gusbcfg |= 1 << 30; /* FDMOD: Force device
> mode */ }
>
> static int dwc2_udc_otg_reset_init(struct udevice *dev,
> @@ -1166,7 +1169,8 @@ static int dwc2_udc_otg_probe(struct udevice
> *dev)
> if (platdata->force_b_session_valid)
> /* Override B session bits : value and enable */
> - setbits_le32(&usbotg_reg->gotgctl, B_VALOEN |
> B_VALOVAL);
> + setbits_le32(&usbotg_reg->gotgctl,
> + A_VALOEN | A_VALOVAL | B_VALOEN |
> B_VALOVAL);
> ret = dwc2_udc_probe(platdata);
> if (ret)
Reviewed-by: Lukasz Majewski <lukma at denx.de>
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190409/45bf1352/attachment.sig>
More information about the U-Boot
mailing list