[U-Boot] [PATCH v4 1/4] arm: socfpga: fix comment about SPL memory layout

[Marek Vasut]

On 4/9/19 9:02 PM, Simon Goldschmidt wrote:
> The comment about SPL memory layout for socfpga gen5 is outdated: the
> initial malloc memory is now at the end of the SRAM, gd is below it
> (see board_init_f_alloc_reserve).
> 
> Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt at gmail.com>
> ---
> 
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
> 
>  include/configs/socfpga_common.h | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
> index f9e2cdc1b3..32ee7426b6 100644
> --- a/include/configs/socfpga_common.h
> +++ b/include/configs/socfpga_common.h
> @@ -236,9 +236,9 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
>   *
>   * 0xFFFF_0000 ...... Start of SRAM
>   * 0xFFFF_xxxx ...... Top of stack (grows down)
> - * 0xFFFF_yyyy ...... Malloc area
> - * 0xFFFF_zzzz ...... Global Data
> - * 0xFFFF_FF00 ...... End of SRAM
> + * 0xFFFF_yyyy ...... Global Data
> + * 0xFFFF_zzzz ...... Malloc area
> + * 0xFFFF_FFFF ...... End of SRAM
>   *
>   * SRAM Memory layout for Arria 10:
>   * 0xFFE0_0000 ...... Start of SRAM (bottom)
> 

Acked-by: Marek Vasut <marex at denx.de>

-- 
Best regards,
Marek Vasut