[U-Boot] [PATCH 2/3 v3] armv8: ls1028ardb: Add support for LS1028ARDB platform

Yuantian Tang andy.tang at nxp.com
Wed Apr 10 08:43:34 UTC 2019


LS1028A is an ARMv8 implementation. LS1028ARDB is an evaluatoin
platform that supports the LS1028A family SoCs. This patch add basic
support of the platform.

Signed-off-by: Sudhanshu Gupta <sudhanshu.gupta at nxp.com>
Signed-off-by: Rai Harninder <harninder.rai at nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat at nxp.com>
Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya at nxp.com>
Signed-off-by: Tang Yuantian <andy.tang at nxp.com>
---
v3:
	- remove ddr fixed initialization
 arch/arm/Kconfig                    |  12 +++
 arch/arm/cpu/armv8/Kconfig          |   1 +
 arch/arm/dts/fsl-ls1028a-rdb.dts    |  88 +++++++++++++++
 board/freescale/ls1028a/Kconfig     |  26 +++++
 board/freescale/ls1028a/MAINTAINERS |  10 ++
 board/freescale/ls1028a/Makefile    |   8 ++
 board/freescale/ls1028a/README      |  79 ++++++++++++++
 board/freescale/ls1028a/ddr.c       |  20 ++++
 board/freescale/ls1028a/ls1028a.c   | 193 +++++++++++++++++++++++++++++++++
 configs/ls1028ardb_tfa_defconfig    |  61 +++++++++++
 include/configs/ls1028a_common.h    | 209 ++++++++++++++++++++++++++++++++++++
 include/configs/ls1028ardb.h        |  77 +++++++++++++
 12 files changed, 784 insertions(+)
 create mode 100644 arch/arm/dts/fsl-ls1028a-rdb.dts
 create mode 100644 board/freescale/ls1028a/Kconfig
 create mode 100644 board/freescale/ls1028a/MAINTAINERS
 create mode 100644 board/freescale/ls1028a/Makefile
 create mode 100644 board/freescale/ls1028a/README
 create mode 100644 board/freescale/ls1028a/ddr.c
 create mode 100644 board/freescale/ls1028a/ls1028a.c
 create mode 100644 configs/ls1028ardb_tfa_defconfig
 create mode 100644 include/configs/ls1028a_common.h
 create mode 100644 include/configs/ls1028ardb.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f42ecce..aaaf36a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1203,6 +1203,17 @@ config TARGET_LS1012AFRDM
 	  development platform that supports the QorIQ LS1012A
 	  Layerscape Architecture processor.
 
+config TARGET_LS1028ARDB
+	bool "Support ls1028ardb"
+	select ARCH_LS1028A
+	select ARM64
+	select ARMV8_MULTIENTRY
+	help
+	  Support for Freescale LS1028ARDB platform
+	  The LS1028A Development System (RDB) is a high-performance
+	  development platform that supports the QorIQ LS1028A
+	  Layerscape Architecture processor.
+
 config TARGET_LS1088ARDB
 	bool "Support ls1088ardb"
 	select ARCH_LS1088A
@@ -1585,6 +1596,7 @@ source "board/freescale/ls2080a/Kconfig"
 source "board/freescale/ls2080aqds/Kconfig"
 source "board/freescale/ls2080ardb/Kconfig"
 source "board/freescale/ls1088a/Kconfig"
+source "board/freescale/ls1028a/Kconfig"
 source "board/freescale/ls1021aqds/Kconfig"
 source "board/freescale/ls1043aqds/Kconfig"
 source "board/freescale/ls1021atwr/Kconfig"
diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig
index f053603..a4fa63b 100644
--- a/arch/arm/cpu/armv8/Kconfig
+++ b/arch/arm/cpu/armv8/Kconfig
@@ -104,6 +104,7 @@ config PSCI_RESET
 		   !TARGET_LS1012ARDB && !TARGET_LS1012AFRDM && \
 		   !TARGET_LS1012A2G5RDB && !TARGET_LS1012AQDS && \
 		   !TARGET_LS1012AFRWY && \
+		   !TARGET_LS1028ARDB && \
 		   !TARGET_LS1043ARDB && !TARGET_LS1043AQDS && \
 		   !TARGET_LS1046ARDB && !TARGET_LS1046AQDS && \
 		   !TARGET_LS2081ARDB && !TARGET_LX2160ARDB && \
diff --git a/arch/arm/dts/fsl-ls1028a-rdb.dts b/arch/arm/dts/fsl-ls1028a-rdb.dts
new file mode 100644
index 0000000..932cfa2
--- /dev/null
+++ b/arch/arm/dts/fsl-ls1028a-rdb.dts
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP ls1028ARDB device tree source
+ *
+ * Copyright 2019 NXP
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1028a.dtsi"
+
+/ {
+	model = "NXP Layerscape 1028a RDB Board";
+	compatible = "fsl,ls1028a-rdb", "fsl,ls1028a";
+};
+
+&dspi0 {
+	status = "okay";
+};
+
+&dspi1 {
+	status = "okay";
+};
+
+&dspi2 {
+	status = "okay";
+};
+
+&esdhc0 {
+	status = "okay";
+};
+
+&esdhc1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/board/freescale/ls1028a/Kconfig b/board/freescale/ls1028a/Kconfig
new file mode 100644
index 0000000..bbfd4dd
--- /dev/null
+++ b/board/freescale/ls1028a/Kconfig
@@ -0,0 +1,26 @@
+if TARGET_LS1028ARDB
+
+config SYS_BOARD
+	default "ls1028a"
+
+config SYS_VENDOR
+	default "freescale"
+
+config SYS_SOC
+	default "fsl-layerscape"
+
+config SYS_CONFIG_NAME
+	default "ls1028ardb"
+
+config EMMC_BOOT
+	bool "Support for booting from EMMC"
+	default n
+
+config SYS_TEXT_BASE
+	default 0x96000000 if SD_BOOT || EMMC_BOOT
+	default 0x82000000 if TFABOOT
+	default 0x20100000
+
+source "board/freescale/common/Kconfig"
+
+endif
diff --git a/board/freescale/ls1028a/MAINTAINERS b/board/freescale/ls1028a/MAINTAINERS
new file mode 100644
index 0000000..135454c
--- /dev/null
+++ b/board/freescale/ls1028a/MAINTAINERS
@@ -0,0 +1,10 @@
+LS1028ARDB BOARD
+M:	Sudhanshu Gupta <sudhanshu.gupta at nxp.com>
+M:	Rai Harninder <harninder.rai at nxp.com>
+M:	Rajesh Bhagat <rajesh.bhagat at nxp.com>
+M:	Tang Yuantian <andy.tang at nxp.com>
+S:	Maintained
+F:	board/freescale/ls1028a/
+F:	include/configs/ls1028a_common.h
+F:	include/configs/ls1028ardb.h
+F:	configs/ls1028ardb_tfa_defconfig
diff --git a/board/freescale/ls1028a/Makefile b/board/freescale/ls1028a/Makefile
new file mode 100644
index 0000000..9bc144c
--- /dev/null
+++ b/board/freescale/ls1028a/Makefile
@@ -0,0 +1,8 @@
+#
+# Copyright 2019 NXP
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y += ls1028a.o
+obj-y += ddr.o
diff --git a/board/freescale/ls1028a/README b/board/freescale/ls1028a/README
new file mode 100644
index 0000000..94a390c
--- /dev/null
+++ b/board/freescale/ls1028a/README
@@ -0,0 +1,79 @@
+Overview
+--------
+The LS1028A Reference Design (RDB) is a high-performance computing,
+evaluation, and development platform that supports ARM SoC LS1028A and its
+derivatives.
+
+LS1028A SoC Overview
+--------------------------------------
+Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc
+
+RDB Default Switch Settings (1: ON; 0: OFF)
+-------------------------------------------
+For XSPI NOR boot (default)
+SW2: 1111_1000
+SW3: 1111_0000
+SW5: 0011_1001
+
+For SD Boot
+SW2: 1000_1000
+SW3: 1111_0000
+SW5: 0011_1001
+
+For eMMC Boot
+SW2: 1001_1000
+SW3: 1111_0000
+SW5: 0011_1001
+
+LS1028ARDB board Overview
+-------------------------
+Processor
+ Two Arm Cortex- A72 processor cores:
+  - Based on 64-bit ARMv8 architecture
+  - Up to 1.3 GHz operation
+  - Single-threaded cores with 48 KB L1 instruction cache and 32 KB L1
+    data cache
+  - Arranged as a single cluster of two cores sharing a single 1 MB L2
+    cache
+DDR memory
+  - Five onboard 1G x8 discrete memory modules (Four data byte lanes
+    ECC)
+  - 32-bit data and 4-bit ECC
+  - One chip select
+  - Data transfer rates of up to 1.6 GT/s
+  - Single-bit error correction and double-bit error detection ECC (4-bit
+    check word across 32-bit data)
+High-speed serial ports(SerDes)
+ - Lane 0: Supports one 1 GbE RJ45 SGMII, connected through the
+   Qualcomm AR8033 PHY
+ - Lane 1: Supports four 1.25 GbE RJ45 QSGMII, each connected
+   through the NXP F104S8A PHY
+ - Lane 2: Connects to one PCIe M.2 Key-E slot to support PCIe Gen3
+   (8 Gbit/s) cards
+ - Lane 3: Connects to one PCIe M.2 Key-E slot or one SATA M.2 Key-B
+   slot through a register mux to support either PCIe Gen 3 (8 Gbit/s) or
+   SATA Gen 3 cards (6 Gbit/s) at a time
+eSDHC
+ - eSDHC1, eSDHC2
+SPI
+ - Connects to two mikroBUS sockets to support mikro-click modules,
+   such as Bluetooth 4.0, 2.4 GHz IEEE 802.15.4 radio transceiver, near
+   field communications (NFC) controller
+Octal SPI (XSPI)
+ - One 256 MB onboard XSPI serial NOR flash memory
+ - One 512 MB onboard XSPI serial NAND flash memory
+ - Supports a QSPI emulator for offboard QSPI emulation
+I2C
+ - All system devices are accessed via I2C1, which is multiplexed on
+   I2C multiplexer PCA9848 to isolate address conflicts and reduce
+   capacitive load
+ - I2C1 is used for EEPROMs, RTC, INA220 current-power sensor,
+   thermal monitor, PCIe/SATA M.2 connectors and mikro-click modules
+   1 and 2
+CAN
+ - The two CAN DB9 ports can support CAN FD fast phase at data rates of
+   up to 5 Mbit/s
+Serial audio interface(SAI)
+ - Audio codec SGTL5000 provides headphone and audio LINEOUT for
+   stereo speakers
+ - IEEE1588 interface to support audio on SAI4
diff --git a/board/freescale/ls1028a/ddr.c b/board/freescale/ls1028a/ddr.c
new file mode 100644
index 0000000..74d3af5
--- /dev/null
+++ b/board/freescale/ls1028a/ddr.c
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <common.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int fsl_initdram(void)
+{
+	gd->ram_size = tfa_get_dram_size();
+
+	if (!gd->ram_size)
+		gd->ram_size = fsl_ddr_sdram_size();
+
+	return 0;
+}
diff --git a/board/freescale/ls1028a/ls1028a.c b/board/freescale/ls1028a/ls1028a.c
new file mode 100644
index 0000000..e3666c3
--- /dev/null
+++ b/board/freescale/ls1028a/ls1028a.c
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <errno.h>
+#include <fsl_ddr.h>
+#include <asm/io.h>
+#include <hwconfig.h>
+#include <fdt_support.h>
+#include <linux/libfdt.h>
+#include <environment.h>
+#include <asm/arch-fsl-layerscape/soc.h>
+#include <i2c.h>
+#include <asm/arch/soc.h>
+#ifdef CONFIG_FSL_LS_PPA
+#include <asm/arch/ppa.h>
+#endif
+#include <fsl_immap.h>
+#include <netdev.h>
+
+#include <fdtdec.h>
+#include <miiphy.h>
+#include "../common/qixis.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+#ifdef CONFIG_ENV_IS_NOWHERE
+	gd->env_addr = (ulong)&default_environment[0];
+#endif
+
+#ifdef CONFIG_FSL_LS_PPA
+	ppa_init();
+#endif
+
+#ifndef CONFIG_SYS_EARLY_PCI_INIT
+	pci_init();
+#endif
+
+#if defined(CONFIG_TARGET_LS1028ARDB)
+	u8 val = I2C_MUX_CH_DEFAULT;
+
+	i2c_write(I2C_MUX_PCA_ADDR_PRI, 0x0b, 1, &val, 1);
+#endif
+	return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
+
+int board_early_init_f(void)
+{
+#ifdef CONFIG_SYS_I2C_EARLY_INIT
+	i2c_early_init_f();
+#endif
+
+	fsl_lsch3_early_init_f();
+	return 0;
+}
+
+void detail_board_ddr_info(void)
+{
+	puts("\nDDR    ");
+	print_size(gd->bd->bi_dram[0].size + gd->bd->bi_dram[1].size, "");
+	print_ddr_info(0);
+}
+
+#ifdef CONFIG_OF_BOARD_SETUP
+int ft_board_setup(void *blob, bd_t *bd)
+{
+	u64 base[CONFIG_NR_DRAM_BANKS];
+	u64 size[CONFIG_NR_DRAM_BANKS];
+
+	ft_cpu_setup(blob, bd);
+
+	/* fixup DT for the two GPP DDR banks */
+	base[0] = gd->bd->bi_dram[0].start;
+	size[0] = gd->bd->bi_dram[0].size;
+	base[1] = gd->bd->bi_dram[1].start;
+	size[1] = gd->bd->bi_dram[1].size;
+
+#ifdef CONFIG_RESV_RAM
+	/* reduce size if reserved memory is within this bank */
+	if (gd->arch.resv_ram >= base[0] &&
+	    gd->arch.resv_ram < base[0] + size[0])
+		size[0] = gd->arch.resv_ram - base[0];
+	else if (gd->arch.resv_ram >= base[1] &&
+		 gd->arch.resv_ram < base[1] + size[1])
+		size[1] = gd->arch.resv_ram - base[1];
+#endif
+
+	fdt_fixup_memory_banks(blob, base, size, 2);
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_FSL_QIXIS
+int checkboard(void)
+{
+#ifdef CONFIG_TFABOOT
+	enum boot_src src = get_boot_src();
+#endif
+	u8 sw;
+
+	int clock;
+	char *board;
+	char buf[64] = {0};
+	static const char *freq[6] = {"100.00", "125.00", "156.25",
+					"161.13", "322.26", "100.00 SS"};
+
+	cpu_name(buf);
+	/* find the board details */
+	sw = QIXIS_READ(id);
+
+	switch (sw) {
+	case 0x46:
+		board = "QDS";
+		break;
+	case 0x47:
+		board = "RDB";
+		break;
+	case 0x49:
+		board = "HSSI";
+		break;
+	default:
+		board = "unknown";
+		break;
+	}
+
+	sw = QIXIS_READ(arch);
+	printf("Board: %s-%s, Version: %c, boot from ",
+	       buf, board, (sw & 0xf) + 'A' - 1);
+
+	sw = QIXIS_READ(brdcfg[0]);
+	sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
+
+#ifdef CONFIG_TFABOOT
+	if (src == BOOT_SOURCE_SD_MMC) {
+		puts("SD\n");
+	} else if (src == BOOT_SOURCE_SD_MMC2) {
+		puts("eMMC\n");
+	} else {
+#endif
+#ifdef CONFIG_SD_BOOT
+		puts("SD\n");
+#elif defined(CONFIG_EMMC_BOOT)
+		puts("eMMC\n");
+#else
+		switch (sw) {
+		case 0:
+		case 4:
+			printf("NOR\n");
+			break;
+		case 1:
+			printf("NAND\n");
+			break;
+		default:
+			printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
+			break;
+		}
+#endif
+#ifdef CONFIG_TFABOOT
+	}
+#endif
+
+	printf("FPGA: v%d (%s)\n", QIXIS_READ(scver), board);
+	puts("SERDES1 Reference : ");
+
+	sw = QIXIS_READ(brdcfg[2]);
+#ifdef CONFIG_TARGET_LS1028ARDB
+	clock = (sw >> 6) & 3;
+#else
+	clock = (sw >> 4) & 0xf;
+#endif
+
+	printf("Clock1 = %sMHz ", freq[clock]);
+#ifdef CONFIG_TARGET_LS1028ARDB
+	clock = (sw >> 4) & 3;
+#else
+	clock = sw & 0xf;
+#endif
+	printf("Clock2 = %sMHz\n", freq[clock]);
+
+	return 0;
+}
+#endif
diff --git a/configs/ls1028ardb_tfa_defconfig b/configs/ls1028ardb_tfa_defconfig
new file mode 100644
index 0000000..7a6068d
--- /dev/null
+++ b/configs/ls1028ardb_tfa_defconfig
@@ -0,0 +1,61 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1028ARDB=y
+CONFIG_SYS_FSL_SDHC_CLK_DIV=1
+CONFIG_TFABOOT=y
+CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
+CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
+CONFIG_AHCI=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=2
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_BOOTDELAY=10
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256 video=1920x1080-32 at 60 cma=256M"
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1028a-rdb"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
+CONFIG_DM=y
+CONFIG_SCSI_AHCI=y
+CONFIG_SATA_CEVA=y
+CONFIG_FSL_CAAM=y
+CONFIG_DM_MMC=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_PHYLIB=y
+CONFIG_PHY_ATHEROS=y
+CONFIG_DM_ETH=y
+CONFIG_PHY_GIGE=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SCSI=y
+CONFIG_DM_SCSI=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_DSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h
new file mode 100644
index 0000000..10f2e88
--- /dev/null
+++ b/include/configs/ls1028a_common.h
@@ -0,0 +1,209 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#ifndef __L1028A_COMMON_H
+#define __L1028A_COMMON_H
+
+#define CONFIG_REMAKE_ELF
+#define CONFIG_FSL_LAYERSCAPE
+#define CONFIG_MP
+
+#include <asm/arch/stream_id_lsch3.h>
+#include <asm/arch/config.h>
+#include <asm/arch/soc.h>
+
+/* Link Definitions */
+#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_TEXT_BASE
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+#define CONFIG_VERY_BIG_RAM
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000UL
+#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY	0
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
+#define CONFIG_SYS_DDR_BLOCK2_BASE	0x2080000000ULL
+#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS	1
+
+#define CONFIG_CMD_MEMTEST
+#define CONFIG_SYS_MEMTEST_START        0x80000000
+#define CONFIG_SYS_MEMTEST_END          0x9fffffff
+
+/*
+ * SMP Definitinos
+ */
+#define CPU_RELEASE_ADDR		secondary_boot_func
+
+/* Generic Timer Definitions */
+#define COUNTER_FREQUENCY		25000000	/* 25MHz */
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2048 * 1024)
+
+/* I2C */
+#define CONFIG_SYS_I2C
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX       1
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE     1
+#define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0) / 2)
+
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
+
+/* Physical Memory Map */
+#define CONFIG_CHIP_SELECTS_PER_CTRL	4
+
+#define CONFIG_HWCONFIG
+#define HWCONFIG_BUFFER_SIZE		128
+
+/* Allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(USB, usb, 0)
+#include <config_distro_bootcmd.h>
+
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"board=ls1028ardb\0"			\
+	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
+	"ramdisk_addr=0x800000\0"		\
+	"ramdisk_size=0x2000000\0"		\
+	"fdt_high=0xffffffffffffffff\0"		\
+	"initrd_high=0xffffffffffffffff\0"	\
+	"fdt_addr=0x00f00000\0"                 \
+	"kernel_addr=0x01000000\0"              \
+	"scriptaddr=0x80000000\0"               \
+	"scripthdraddr=0x80080000\0"		\
+	"fdtheader_addr_r=0x80100000\0"         \
+	"kernelheader_addr_r=0x80200000\0"      \
+	"load_addr=0xa0000000\0"            \
+	"kernel_addr_r=0x81000000\0"            \
+	"fdt_addr_r=0x90000000\0"               \
+	"ramdisk_addr_r=0xa0000000\0"           \
+	"kernel_start=0x1000000\0"		\
+	"kernelheader_start=0x800000\0"		\
+	"kernel_load=0xa0000000\0"		\
+	"kernel_size=0x2800000\0"		\
+	"kernelheader_size=0x40000\0"		\
+	"kernel_addr_sd=0x8000\0"		\
+	"kernel_size_sd=0x14000\0"		\
+	"kernelhdr_addr_sd=0x4000\0"		\
+	"kernelhdr_size_sd=0x10\0"		\
+	"console=ttyS0,115200\0"                \
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"	\
+	BOOTENV					\
+	"boot_scripts=ls1028ardb_boot.scr\0"    \
+	"boot_script_hdr=hdr_ls1028ardb_bs.out\0"	\
+	"scan_dev_for_boot_part="               \
+		"part list ${devtype} ${devnum} devplist; "   \
+		"env exists devplist || setenv devplist 1; "  \
+		"for distro_bootpart in ${devplist}; do "     \
+		  "if fstype ${devtype} "                  \
+			"${devnum}:${distro_bootpart} "      \
+			"bootfstype; then "                  \
+			"run scan_dev_for_boot; "            \
+		  "fi; "                                   \
+		"done\0"                                   \
+	"scan_dev_for_boot="				  \
+		"echo Scanning ${devtype} "		  \
+				"${devnum}:${distro_bootpart}...; "  \
+		"for prefix in ${boot_prefixes}; do "	  \
+			"run scan_dev_for_scripts; "	  \
+		"done;"					  \
+		"\0"					  \
+	"boot_a_script="				  \
+		"load ${devtype} ${devnum}:${distro_bootpart} "  \
+			"${scriptaddr} ${prefix}${script}; "    \
+		"env exists secureboot && load ${devtype} "     \
+			"${devnum}:${distro_bootpart} "		\
+			"${scripthdraddr} ${prefix}${boot_script_hdr} " \
+			"&& esbc_validate ${scripthdraddr};"    \
+		"source ${scriptaddr}\0"	  \
+	"sd_bootcmd=echo Trying load from SD ..;"	\
+		"mmcinfo; mmc read $load_addr "		\
+		"$kernel_addr_sd $kernel_size_sd && "	\
+		"env exists secureboot && mmc read $kernelheader_addr_r " \
+		"$kernelhdr_addr_sd $kernelhdr_size_sd "		\
+		" && esbc_validate ${kernelheader_addr_r};"	\
+		"bootm $load_addr#$board\0"		\
+	"sd_hdploadcmd=echo Trying load HDP firmware from SD..;"      \
+		"mmcinfo;mmc read $load_addr 0x4800 0x200 "		\
+		"&& hdp load $load_addr 0x2000\0"	\
+	"emmc_bootcmd=echo Trying load from EMMC ..;"	\
+		"mmcinfo; mmc dev 1; mmc read $load_addr "		\
+		"$kernel_addr_sd $kernel_size_sd && "	\
+		"env exists secureboot && mmc read $kernelheader_addr_r " \
+		"$kernelhdr_addr_sd $kernelhdr_size_sd "		\
+		" && esbc_validate ${kernelheader_addr_r};"	\
+		"bootm $load_addr#$board\0"			\
+	"emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;"      \
+		"mmc dev 1;mmcinfo;mmc read $load_addr 0x4800 0x200 "	\
+		"&& hdp load $load_addr 0x2000\0"
+
+#undef CONFIG_BOOTCOMMAND
+
+#define XSPI_NOR_BOOTCOMMAND	\
+	"run qspi_hdploadcmd; run distro_bootcmd; run qspi_bootcmd; " \
+	"env exists secureboot && esbc_halt;;"
+#define SD_BOOTCOMMAND	\
+	"run sd_hdploadcmd; run distro_bootcmd;run sd_bootcmd; " \
+	"env exists secureboot && esbc_halt;"
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Boot args buffer */
+
+#ifndef CONFIG_CMDLINE_EDITING
+#define CONFIG_CMDLINE_EDITING		1
+#endif
+
+#define CONFIG_SYS_MAXARGS		64	/* max command args */
+
+#define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
+
+/*  MMC  */
+#ifdef CONFIG_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
+#endif
+
+#define CONFIG_SYS_MMC_ENV_DEV         0
+#define OCRAM_NONSECURE_SIZE		0x00010000
+#define CONFIG_ENV_OFFSET              0x500000        /* 5MB */
+#define CONFIG_SYS_FSL_QSPI_BASE	0x20000000
+#define CONFIG_ENV_ADDR	CONFIG_SYS_FSL_QSPI_BASE + CONFIG_ENV_OFFSET
+#define CONFIG_ENV_SIZE			0x2000          /* 8KB */
+#define CONFIG_ENV_SECT_SIZE           0x40000
+
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+
+/*  MMC  */
+#ifdef CONFIG_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
+#endif
+
+/* I2C bus multiplexer */
+#define I2C_MUX_PCA_ADDR_PRI            0x77 /* Primary Mux*/
+#define I2C_MUX_CH_DEFAULT              0x8
+
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#define CONFIG_SYS_EEPROM_BUS_NUM		0
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
+
+#endif /* __L1028A_COMMON_H */
diff --git a/include/configs/ls1028ardb.h b/include/configs/ls1028ardb.h
new file mode 100644
index 0000000..10791be
--- /dev/null
+++ b/include/configs/ls1028ardb.h
@@ -0,0 +1,77 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#ifndef __LS1028A_RDB_H
+#define __LS1028A_RDB_H
+
+#include "ls1028a_common.h"
+
+#define CONFIG_SYS_CLK_FREQ		100000000
+#define CONFIG_DDR_CLK_FREQ		100000000
+#define COUNTER_FREQUENCY_REAL		(CONFIG_SYS_CLK_FREQ / 4)
+
+#define CONFIG_SYS_RTC_BUS_NUM         0
+
+/* Store environment at top of flash */
+#define CONFIG_ENV_SIZE			0x2000
+
+#define CONFIG_DIMM_SLOTS_PER_CTLR          1
+
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+
+#define CONFIG_QIXIS_I2C_ACCESS
+#define CONFIG_SYS_I2C_EARLY_INIT
+
+/*
+ * QIXIS Definitions
+ */
+#define CONFIG_FSL_QIXIS
+
+#ifdef CONFIG_FSL_QIXIS
+#define QIXIS_BASE			0x7fb00000
+#define QIXIS_BASE_PHYS			QIXIS_BASE
+#define CONFIG_SYS_I2C_FPGA_ADDR	0x66
+#define QIXIS_LBMAP_SWITCH		2
+#define QIXIS_LBMAP_MASK		0xe0
+#define QIXIS_LBMAP_SHIFT		0x5
+#define QIXIS_LBMAP_DFLTBANK		0x00
+#define QIXIS_LBMAP_ALTBANK		0x00
+#define QIXIS_LBMAP_SD			0x00
+#define QIXIS_LBMAP_EMMC		0x00
+#define QIXIS_LBMAP_QSPI		0x00
+#define QIXIS_RCW_SRC_SD		0xf8
+#define QIXIS_RCW_SRC_EMMC		0xf9
+#define QIXIS_RCW_SRC_QSPI		0xff
+#define QIXIS_RST_CTL_RESET		0x31
+#define QIXIS_RCFG_CTL_RECONFIG_IDLE	0x10
+#define QIXIS_RCFG_CTL_RECONFIG_START	0x11
+#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE	0x08
+#define QIXIS_RST_FORCE_MEM		0x01
+
+#define CONFIG_SYS_FPGA_CSPR_EXT	(0x0)
+#define CONFIG_SYS_FPGA_CSPR		(CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \
+					CSPR_PORT_SIZE_8 | \
+					CSPR_MSEL_GPCM | \
+					CSPR_V)
+#define CONFIG_SYS_FPGA_CSOR		(CSOR_NOR_ADM_SHIFT(4) | \
+					CSOR_NOR_NOR_MODE_AVD_NOR | \
+					CSOR_NOR_TRHZ_80)
+#endif
+
+/* SATA */
+#ifndef CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT2
+#endif
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
+#define CONFIG_SYS_SCSI_MAX_LUN			1
+#define CONFIG_SYS_SCSI_MAX_DEVICE		(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+						CONFIG_SYS_SCSI_MAX_LUN)
+#define SCSI_VEND_ID 0x1b4b
+#define SCSI_DEV_ID  0x9170
+#define CONFIG_SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID}
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SATA1                        AHCI_BASE_ADDR1
+
+#endif /* __LS1028A_RDB_H */
-- 
2.7.4



More information about the U-Boot mailing list