[U-Boot] [PATCH v2 5/6] ARM: dts: Import Amlogic G12A u200 DT from Linux 5.1-rc1
Neil Armstrong
narmstrong at baylibre.com
Wed Apr 10 15:23:47 UTC 2019
Import Linux 5.1-rc1 DT from 9e98c678c2d6 ("Linux 5.1-rc1") for the
meson-g12a-u200 board, the meson-g12a.dtsi and the corresponding bindings.
Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
---
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/meson-g12a-u200.dts | 29 +++
arch/arm/dts/meson-g12a.dtsi | 192 ++++++++++++++++++
include/dt-bindings/clock/g12a-aoclkc.h | 34 ++++
include/dt-bindings/clock/g12a-clkc.h | 135 ++++++++++++
include/dt-bindings/gpio/meson-g12a-gpio.h | 114 +++++++++++
.../reset/amlogic,meson-g12a-reset.h | 134 ++++++++++++
include/dt-bindings/reset/g12a-aoclkc.h | 18 ++
8 files changed, 658 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/dts/meson-g12a-u200.dts
create mode 100644 arch/arm/dts/meson-g12a.dtsi
create mode 100644 include/dt-bindings/clock/g12a-aoclkc.h
create mode 100644 include/dt-bindings/clock/g12a-clkc.h
create mode 100644 include/dt-bindings/gpio/meson-g12a-gpio.h
create mode 100644 include/dt-bindings/reset/amlogic,meson-g12a-reset.h
create mode 100644 include/dt-bindings/reset/g12a-aoclkc.h
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 36b969d6de..c5658d359f 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -104,7 +104,8 @@ dtb-$(CONFIG_ARCH_MESON) += \
meson-gxl-s905x-libretech-cc.dtb \
meson-gxl-s905x-khadas-vim.dtb \
meson-gxm-khadas-vim2.dtb \
- meson-axg-s400.dtb
+ meson-axg-s400.dtb \
+ meson-g12a-u200.dtb
dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
tegra20-medcom-wide.dtb \
tegra20-paz00.dtb \
diff --git a/arch/arm/dts/meson-g12a-u200.dts b/arch/arm/dts/meson-g12a-u200.dts
new file mode 100644
index 0000000000..c44dbdddf2
--- /dev/null
+++ b/arch/arm/dts/meson-g12a-u200.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-g12a.dtsi"
+
+/ {
+ compatible = "amlogic,u200", "amlogic,g12a";
+ model = "Amlogic Meson G12A U200 Development Board";
+
+ aliases {
+ serial0 = &uart_AO;
+ };
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+};
+
+&uart_AO {
+ status = "okay";
+};
+
diff --git a/arch/arm/dts/meson-g12a.dtsi b/arch/arm/dts/meson-g12a.dtsi
new file mode 100644
index 0000000000..17c6217f8a
--- /dev/null
+++ b/arch/arm/dts/meson-g12a.dtsi
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "amlogic,g12a";
+
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <0x2>;
+ #size-cells = <0x0>;
+
+ cpu0: cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ cpu1: cpu at 1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ cpu2: cpu at 2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ cpu3: cpu at 3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ l2: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* 3 MiB reserved for ARM Trusted Firmware (BL31) */
+ secmon_reserved: secmon at 5000000 {
+ reg = <0x0 0x05000000 0x0 0x300000>;
+ no-map;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ apb: bus at ff600000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xff600000 0x0 0x200000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xff600000 0x0 0x200000>;
+
+ periphs: bus at 34400 {
+ compatible = "simple-bus";
+ reg = <0x0 0x34400 0x0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0x34400 0x0 0x400>;
+ };
+
+ hiu: bus at 3c000 {
+ compatible = "simple-bus";
+ reg = <0x0 0x3c000 0x0 0x1400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0x3c000 0x0 0x1400>;
+
+ hhi: system-controller at 0 {
+ compatible = "amlogic,meson-gx-hhi-sysctrl",
+ "simple-mfd", "syscon";
+ reg = <0 0 0 0x400>;
+
+ clkc: clock-controller {
+ compatible = "amlogic,g12a-clkc";
+ #clock-cells = <1>;
+ clocks = <&xtal>;
+ clock-names = "xtal";
+ };
+ };
+ };
+ };
+
+ aobus: bus at ff800000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xff800000 0x0 0x100000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
+
+ uart_AO: serial at 3000 {
+ compatible = "amlogic,meson-gx-uart",
+ "amlogic,meson-ao-uart";
+ reg = <0x0 0x3000 0x0 0x18>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xtal>, <&xtal>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
+ status = "disabled";
+ };
+
+ uart_AO_B: serial at 4000 {
+ compatible = "amlogic,meson-gx-uart",
+ "amlogic,meson-ao-uart";
+ reg = <0x0 0x4000 0x0 0x18>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xtal>, <&xtal>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
+ status = "disabled";
+ };
+ };
+
+ gic: interrupt-controller at ffc01000 {
+ compatible = "arm,gic-400";
+ reg = <0x0 0xffc01000 0 0x1000>,
+ <0x0 0xffc02000 0 0x2000>,
+ <0x0 0xffc04000 0 0x2000>,
+ <0x0 0xffc06000 0 0x2000>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ };
+
+ cbus: bus at ffd00000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xffd00000 0x0 0x100000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x100000>;
+
+ clk_msr: clock-measure at 18000 {
+ compatible = "amlogic,meson-g12a-clk-measure";
+ reg = <0x0 0x18000 0x0 0x10>;
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ xtal: xtal-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xtal";
+ #clock-cells = <0>;
+ };
+
+};
diff --git a/include/dt-bindings/clock/g12a-aoclkc.h b/include/dt-bindings/clock/g12a-aoclkc.h
new file mode 100644
index 0000000000..8db01ffbeb
--- /dev/null
+++ b/include/dt-bindings/clock/g12a-aoclkc.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright (c) 2016 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong at baylibre.com>
+ *
+ * Copyright (c) 2018 Amlogic, inc.
+ * Author: Qiufang Dai <qiufang.dai at amlogic.com>
+ */
+
+#ifndef DT_BINDINGS_CLOCK_AMLOGIC_MESON_G12A_AOCLK
+#define DT_BINDINGS_CLOCK_AMLOGIC_MESON_G12A_AOCLK
+
+#define CLKID_AO_AHB 0
+#define CLKID_AO_IR_IN 1
+#define CLKID_AO_I2C_M0 2
+#define CLKID_AO_I2C_S0 3
+#define CLKID_AO_UART 4
+#define CLKID_AO_PROD_I2C 5
+#define CLKID_AO_UART2 6
+#define CLKID_AO_IR_OUT 7
+#define CLKID_AO_SAR_ADC 8
+#define CLKID_AO_MAILBOX 9
+#define CLKID_AO_M3 10
+#define CLKID_AO_AHB_SRAM 11
+#define CLKID_AO_RTI 12
+#define CLKID_AO_M4_FCLK 13
+#define CLKID_AO_M4_HCLK 14
+#define CLKID_AO_CLK81 15
+#define CLKID_AO_SAR_ADC_CLK 18
+#define CLKID_AO_32K 23
+#define CLKID_AO_CEC 27
+#define CLKID_AO_CTS_RTC_OSCIN 28
+
+#endif
diff --git a/include/dt-bindings/clock/g12a-clkc.h b/include/dt-bindings/clock/g12a-clkc.h
new file mode 100644
index 0000000000..83b657038d
--- /dev/null
+++ b/include/dt-bindings/clock/g12a-clkc.h
@@ -0,0 +1,135 @@
+/* SPDX-License-Identifier: GPL-2.0+ OR MIT */
+/*
+ * Meson-G12A clock tree IDs
+ *
+ * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
+ */
+
+#ifndef __G12A_CLKC_H
+#define __G12A_CLKC_H
+
+#define CLKID_SYS_PLL 0
+#define CLKID_FIXED_PLL 1
+#define CLKID_FCLK_DIV2 2
+#define CLKID_FCLK_DIV3 3
+#define CLKID_FCLK_DIV4 4
+#define CLKID_FCLK_DIV5 5
+#define CLKID_FCLK_DIV7 6
+#define CLKID_GP0_PLL 7
+#define CLKID_CLK81 10
+#define CLKID_MPLL0 11
+#define CLKID_MPLL1 12
+#define CLKID_MPLL2 13
+#define CLKID_MPLL3 14
+#define CLKID_DDR 15
+#define CLKID_DOS 16
+#define CLKID_AUDIO_LOCKER 17
+#define CLKID_MIPI_DSI_HOST 18
+#define CLKID_ETH_PHY 19
+#define CLKID_ISA 20
+#define CLKID_PL301 21
+#define CLKID_PERIPHS 22
+#define CLKID_SPICC0 23
+#define CLKID_I2C 24
+#define CLKID_SANA 25
+#define CLKID_SD 26
+#define CLKID_RNG0 27
+#define CLKID_UART0 28
+#define CLKID_SPICC1 29
+#define CLKID_HIU_IFACE 30
+#define CLKID_MIPI_DSI_PHY 31
+#define CLKID_ASSIST_MISC 32
+#define CLKID_SD_EMMC_A 33
+#define CLKID_SD_EMMC_B 34
+#define CLKID_SD_EMMC_C 35
+#define CLKID_AUDIO_CODEC 36
+#define CLKID_AUDIO 37
+#define CLKID_ETH 38
+#define CLKID_DEMUX 39
+#define CLKID_AUDIO_IFIFO 40
+#define CLKID_ADC 41
+#define CLKID_UART1 42
+#define CLKID_G2D 43
+#define CLKID_RESET 44
+#define CLKID_PCIE_COMB 45
+#define CLKID_PARSER 46
+#define CLKID_USB 47
+#define CLKID_PCIE_PHY 48
+#define CLKID_AHB_ARB0 49
+#define CLKID_AHB_DATA_BUS 50
+#define CLKID_AHB_CTRL_BUS 51
+#define CLKID_HTX_HDCP22 52
+#define CLKID_HTX_PCLK 53
+#define CLKID_BT656 54
+#define CLKID_USB1_DDR_BRIDGE 55
+#define CLKID_MMC_PCLK 56
+#define CLKID_UART2 57
+#define CLKID_VPU_INTR 58
+#define CLKID_GIC 59
+#define CLKID_SD_EMMC_A_CLK0 60
+#define CLKID_SD_EMMC_B_CLK0 61
+#define CLKID_SD_EMMC_C_CLK0 62
+#define CLKID_HIFI_PLL 74
+#define CLKID_VCLK2_VENCI0 80
+#define CLKID_VCLK2_VENCI1 81
+#define CLKID_VCLK2_VENCP0 82
+#define CLKID_VCLK2_VENCP1 83
+#define CLKID_VCLK2_VENCT0 84
+#define CLKID_VCLK2_VENCT1 85
+#define CLKID_VCLK2_OTHER 86
+#define CLKID_VCLK2_ENCI 87
+#define CLKID_VCLK2_ENCP 88
+#define CLKID_DAC_CLK 89
+#define CLKID_AOCLK 90
+#define CLKID_IEC958 91
+#define CLKID_ENC480P 92
+#define CLKID_RNG1 93
+#define CLKID_VCLK2_ENCT 94
+#define CLKID_VCLK2_ENCL 95
+#define CLKID_VCLK2_VENCLMMC 96
+#define CLKID_VCLK2_VENCL 97
+#define CLKID_VCLK2_OTHER1 98
+#define CLKID_FCLK_DIV2P5 99
+#define CLKID_DMA 105
+#define CLKID_EFUSE 106
+#define CLKID_ROM_BOOT 107
+#define CLKID_RESET_SEC 108
+#define CLKID_SEC_AHB_APB3 109
+#define CLKID_VPU_0_SEL 110
+#define CLKID_VPU_0 112
+#define CLKID_VPU_1_SEL 113
+#define CLKID_VPU_1 115
+#define CLKID_VPU 116
+#define CLKID_VAPB_0_SEL 117
+#define CLKID_VAPB_0 119
+#define CLKID_VAPB_1_SEL 120
+#define CLKID_VAPB_1 122
+#define CLKID_VAPB_SEL 123
+#define CLKID_VAPB 124
+#define CLKID_HDMI_PLL 128
+#define CLKID_VID_PLL 129
+#define CLKID_VCLK 138
+#define CLKID_VCLK2 139
+#define CLKID_VCLK_DIV1 148
+#define CLKID_VCLK_DIV2 149
+#define CLKID_VCLK_DIV4 150
+#define CLKID_VCLK_DIV6 151
+#define CLKID_VCLK_DIV12 152
+#define CLKID_VCLK2_DIV1 153
+#define CLKID_VCLK2_DIV2 154
+#define CLKID_VCLK2_DIV4 155
+#define CLKID_VCLK2_DIV6 156
+#define CLKID_VCLK2_DIV12 157
+#define CLKID_CTS_ENCI 162
+#define CLKID_CTS_ENCP 163
+#define CLKID_CTS_VDAC 164
+#define CLKID_HDMI_TX 165
+#define CLKID_HDMI 168
+#define CLKID_MALI_0_SEL 169
+#define CLKID_MALI_0 171
+#define CLKID_MALI_1_SEL 172
+#define CLKID_MALI_1 174
+#define CLKID_MALI 175
+#define CLKID_MPLL_5OM 177
+
+#endif /* __G12A_CLKC_H */
diff --git a/include/dt-bindings/gpio/meson-g12a-gpio.h b/include/dt-bindings/gpio/meson-g12a-gpio.h
new file mode 100644
index 0000000000..f7bd69350d
--- /dev/null
+++ b/include/dt-bindings/gpio/meson-g12a-gpio.h
@@ -0,0 +1,114 @@
+/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
+/*
+ * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
+ * Author: Xingyu Chen <xingyu.chen at amlogic.com>
+ */
+
+#ifndef _DT_BINDINGS_MESON_G12A_GPIO_H
+#define _DT_BINDINGS_MESON_G12A_GPIO_H
+
+/* First GPIO chip */
+#define GPIOAO_0 0
+#define GPIOAO_1 1
+#define GPIOAO_2 2
+#define GPIOAO_3 3
+#define GPIOAO_4 4
+#define GPIOAO_5 5
+#define GPIOAO_6 6
+#define GPIOAO_7 7
+#define GPIOAO_8 8
+#define GPIOAO_9 9
+#define GPIOAO_10 10
+#define GPIOAO_11 11
+#define GPIOE_0 12
+#define GPIOE_1 13
+#define GPIOE_2 14
+
+/* Second GPIO chip */
+#define GPIOZ_0 0
+#define GPIOZ_1 1
+#define GPIOZ_2 2
+#define GPIOZ_3 3
+#define GPIOZ_4 4
+#define GPIOZ_5 5
+#define GPIOZ_6 6
+#define GPIOZ_7 7
+#define GPIOZ_8 8
+#define GPIOZ_9 9
+#define GPIOZ_10 10
+#define GPIOZ_11 11
+#define GPIOZ_12 12
+#define GPIOZ_13 13
+#define GPIOZ_14 14
+#define GPIOZ_15 15
+#define GPIOH_0 16
+#define GPIOH_1 17
+#define GPIOH_2 18
+#define GPIOH_3 19
+#define GPIOH_4 20
+#define GPIOH_5 21
+#define GPIOH_6 22
+#define GPIOH_7 23
+#define GPIOH_8 24
+#define BOOT_0 25
+#define BOOT_1 26
+#define BOOT_2 27
+#define BOOT_3 28
+#define BOOT_4 29
+#define BOOT_5 30
+#define BOOT_6 31
+#define BOOT_7 32
+#define BOOT_8 33
+#define BOOT_9 34
+#define BOOT_10 35
+#define BOOT_11 36
+#define BOOT_12 37
+#define BOOT_13 38
+#define BOOT_14 39
+#define BOOT_15 40
+#define GPIOC_0 41
+#define GPIOC_1 42
+#define GPIOC_2 43
+#define GPIOC_3 44
+#define GPIOC_4 45
+#define GPIOC_5 46
+#define GPIOC_6 47
+#define GPIOC_7 48
+#define GPIOA_0 49
+#define GPIOA_1 50
+#define GPIOA_2 51
+#define GPIOA_3 52
+#define GPIOA_4 53
+#define GPIOA_5 54
+#define GPIOA_6 55
+#define GPIOA_7 56
+#define GPIOA_8 57
+#define GPIOA_9 58
+#define GPIOA_10 59
+#define GPIOA_11 60
+#define GPIOA_12 61
+#define GPIOA_13 62
+#define GPIOA_14 63
+#define GPIOA_15 64
+#define GPIOX_0 65
+#define GPIOX_1 66
+#define GPIOX_2 67
+#define GPIOX_3 68
+#define GPIOX_4 69
+#define GPIOX_5 70
+#define GPIOX_6 71
+#define GPIOX_7 72
+#define GPIOX_8 73
+#define GPIOX_9 74
+#define GPIOX_10 75
+#define GPIOX_11 76
+#define GPIOX_12 77
+#define GPIOX_13 78
+#define GPIOX_14 79
+#define GPIOX_15 80
+#define GPIOX_16 81
+#define GPIOX_17 82
+#define GPIOX_18 83
+#define GPIOX_19 84
+
+#endif /* _DT_BINDINGS_MESON_G12A_GPIO_H */
diff --git a/include/dt-bindings/reset/amlogic,meson-g12a-reset.h b/include/dt-bindings/reset/amlogic,meson-g12a-reset.h
new file mode 100644
index 0000000000..8063e8314e
--- /dev/null
+++ b/include/dt-bindings/reset/amlogic,meson-g12a-reset.h
@@ -0,0 +1,134 @@
+/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
+/*
+ * Copyright (c) 2019 BayLibre, SAS.
+ * Author: Jerome Brunet <jbrunet at baylibre.com>
+ *
+ */
+
+#ifndef _DT_BINDINGS_AMLOGIC_MESON_G12A_RESET_H
+#define _DT_BINDINGS_AMLOGIC_MESON_G12A_RESET_H
+
+/* RESET0 */
+#define RESET_HIU 0
+/* 1 */
+#define RESET_DOS 2
+/* 3-4 */
+#define RESET_VIU 5
+#define RESET_AFIFO 6
+#define RESET_VID_PLL_DIV 7
+/* 8-9 */
+#define RESET_VENC 10
+#define RESET_ASSIST 11
+#define RESET_PCIE_CTRL_A 12
+#define RESET_VCBUS 13
+#define RESET_PCIE_PHY 14
+#define RESET_PCIE_APB 15
+#define RESET_GIC 16
+#define RESET_CAPB3_DECODE 17
+/* 18 */
+#define RESET_HDMITX_CAPB3 19
+#define RESET_DVALIN_CAPB3 20
+#define RESET_DOS_CAPB3 21
+/* 22 */
+#define RESET_CBUS_CAPB3 23
+#define RESET_AHB_CNTL 24
+#define RESET_AHB_DATA 25
+#define RESET_VCBUS_CLK81 26
+/* 27-31 */
+/* RESET1 */
+/* 32 */
+#define RESET_DEMUX 33
+#define RESET_USB 34
+#define RESET_DDR 35
+/* 36 */
+#define RESET_BT656 37
+#define RESET_AHB_SRAM 38
+/* 39 */
+#define RESET_PARSER 40
+/* 41 */
+#define RESET_ISA 42
+#define RESET_ETHERNET 43
+#define RESET_SD_EMMC_A 44
+#define RESET_SD_EMMC_B 45
+#define RESET_SD_EMMC_C 46
+/* 47-60 */
+#define RESET_AUDIO_CODEC 61
+/* 62-63 */
+/* RESET2 */
+/* 64 */
+#define RESET_AUDIO 65
+#define RESET_HDMITX_PHY 66
+/* 67 */
+#define RESET_MIPI_DSI_HOST 68
+#define RESET_ALOCKER 69
+#define RESET_GE2D 70
+#define RESET_PARSER_REG 71
+#define RESET_PARSER_FETCH 72
+#define RESET_CTL 73
+#define RESET_PARSER_TOP 74
+/* 75-77 */
+#define RESET_DVALIN 78
+#define RESET_HDMITX 79
+/* 80-95 */
+/* RESET3 */
+/* 96-95 */
+#define RESET_DEMUX_TOP 105
+#define RESET_DEMUX_DES_PL 106
+#define RESET_DEMUX_S2P_0 107
+#define RESET_DEMUX_S2P_1 108
+#define RESET_DEMUX_0 109
+#define RESET_DEMUX_1 110
+#define RESET_DEMUX_2 111
+/* 112-127 */
+/* RESET4 */
+/* 128-129 */
+#define RESET_MIPI_DSI_PHY 130
+/* 131-132 */
+#define RESET_RDMA 133
+#define RESET_VENCI 134
+#define RESET_VENCP 135
+/* 136 */
+#define RESET_VDAC 137
+/* 138-139 */
+#define RESET_VDI6 140
+#define RESET_VENCL 141
+#define RESET_I2C_M1 142
+#define RESET_I2C_M2 143
+/* 144-159 */
+/* RESET5 */
+/* 160-191 */
+/* RESET6 */
+#define RESET_GEN 192
+#define RESET_SPICC0 193
+#define RESET_SC 194
+#define RESET_SANA_3 195
+#define RESET_I2C_M0 196
+#define RESET_TS_PLL 197
+#define RESET_SPICC1 198
+#define RESET_STREAM 199
+#define RESET_TS_CPU 200
+#define RESET_UART0 201
+#define RESET_UART1_2 202
+#define RESET_ASYNC0 203
+#define RESET_ASYNC1 204
+#define RESET_SPIFC0 205
+#define RESET_I2C_M3 206
+/* 207-223 */
+/* RESET7 */
+#define RESET_USB_DDR_0 224
+#define RESET_USB_DDR_1 225
+#define RESET_USB_DDR_2 226
+#define RESET_USB_DDR_3 227
+#define RESET_TS_GPU 228
+#define RESET_DEVICE_MMC_ARB 229
+#define RESET_DVALIN_DMC_PIPL 230
+#define RESET_VID_LOCK 231
+#define RESET_NIC_DMC_PIPL 232
+#define RESET_DMC_VPU_PIPL 233
+#define RESET_GE2D_DMC_PIPL 234
+#define RESET_HCODEC_DMC_PIPL 235
+#define RESET_WAVE420_DMC_PIPL 236
+#define RESET_HEVCF_DMC_PIPL 237
+/* 238-255 */
+
+#endif
diff --git a/include/dt-bindings/reset/g12a-aoclkc.h b/include/dt-bindings/reset/g12a-aoclkc.h
new file mode 100644
index 0000000000..bd2e233713
--- /dev/null
+++ b/include/dt-bindings/reset/g12a-aoclkc.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright (c) 2016 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong at baylibre.com>
+ */
+
+#ifndef DT_BINDINGS_RESET_AMLOGIC_MESON_G12A_AOCLK
+#define DT_BINDINGS_RESET_AMLOGIC_MESON_G12A_AOCLK
+
+#define RESET_AO_IR_IN 0
+#define RESET_AO_UART 1
+#define RESET_AO_I2C_M 2
+#define RESET_AO_I2C_S 3
+#define RESET_AO_SAR_ADC 4
+#define RESET_AO_UART2 5
+#define RESET_AO_IR_OUT 6
+
+#endif
--
2.21.0
More information about the U-Boot
mailing list