[U-Boot] [PATCH 1/6] arm: mach-omap2: am33xx: ddr: programming of EXT_PHY_CTRL1 and EXT_PHY_CTRL1_SHADOW

[Keerthy]

From: Brad Griffis <bgriffis at ti.com>

Adjust DQS skew in case where invert_clkout=1 is used.
Match recommended values from EMIF Tools app note:

http://www.ti.com/lit/an/sprac70/sprac70.pdf

Signed-off-by: Brad Griffis <bgriffis at ti.com>
Signed-off-by: Keerthy <j-keerthy at ti.com>
---
 arch/arm/mach-omap2/am33xx/ddr.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/am33xx/ddr.c b/arch/arm/mach-omap2/am33xx/ddr.c
index be6f4d72cc..816d4e8e05 100644
--- a/arch/arm/mach-omap2/am33xx/ddr.c
+++ b/arch/arm/mach-omap2/am33xx/ddr.c
@@ -256,8 +256,16 @@ static void ext_phy_settings_hwlvl(const struct emif_regs *regs, int nr)
 	 * Enable hardware leveling on the EMIF.  For details about these
 	 * magic values please see the EMIF registers section of the TRM.
 	 */
-	writel(0x08020080, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_1);
-	writel(0x08020080, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_1_shdw);
+	if (regs->emif_ddr_phy_ctlr_1 & 0x00040000) {
+		/* PHY_INVERT_CLKOUT = 1 */
+		writel(0x00040100, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_1);
+		writel(0x00040100, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_1_shdw);
+	} else {
+		/* PHY_INVERT_CLKOUT = 0 */
+		writel(0x08020080, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_1);
+		writel(0x08020080, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_1_shdw);
+	}
+
 	writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_22);
 	writel(0x00000000, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_22_shdw);
 	writel(0x00600020, &emif_reg[nr]->emif_ddr_ext_phy_ctrl_23);
-- 
2.17.1