[U-Boot] [PATCH 1/1] common: fdt_support: Check mtdparts cell size

Stefan Mavrodiev stefan at olimex.com
Fri Apr 12 09:46:02 UTC 2019


When using fdt_fixup_mtdparts() offset and length cell sizes
are limited to 4 bytes (1 cell). However if the mtd device is
bigger then 4GiB, then #address-cells and #size-cells are
8 bytes (2 cells) [1].

This patch read #size-cells and uses either fdt32_t or
fdt64_t cell size. The default is fdt32_t.

[1] Documentation/devicetree/bindings/mtd/partition.txt

Signed-off-by: Stefan Mavrodiev <stefan at olimex.com>
---
 common/fdt_support.c | 33 ++++++++++++++++++++++++---------
 1 file changed, 24 insertions(+), 9 deletions(-)

diff --git a/common/fdt_support.c b/common/fdt_support.c
index 42583e3ed8..b0501e12e6 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -724,11 +724,6 @@ int fdt_increase_size(void *fdt, int add_len)
 #include <jffs2/load_kernel.h>
 #include <mtd_node.h>
 
-struct reg_cell {
-	unsigned int r0;
-	unsigned int r1;
-};
-
 static int fdt_del_subnodes(const void *blob, int parent_offset)
 {
 	int off, ndepth;
@@ -787,15 +782,22 @@ int fdt_node_set_part_info(void *blob, int parent_offset,
 {
 	struct list_head *pentry;
 	struct part_info *part;
-	struct reg_cell cell;
 	int off, ndepth = 0;
 	int part_num, ret;
+	int sizecell;
 	char buf[64];
 
 	ret = fdt_del_partitions(blob, parent_offset);
 	if (ret < 0)
 		return ret;
 
+	/*
+	 * Check if size/address is 1 or 2 cells.
+	 * We assume #address-cells and #size-cells have same value.
+	 */
+	sizecell = fdt_getprop_u32_default_node(blob, parent_offset,
+						0, "#size-cells", 1);
+
 	/*
 	 * Check if it is nand {}; subnode, adjust
 	 * the offset in this case
@@ -844,10 +846,23 @@ add_ro:
 				goto err_prop;
 		}
 
-		cell.r0 = cpu_to_fdt32(part->offset);
-		cell.r1 = cpu_to_fdt32(part->size);
 add_reg:
-		ret = fdt_setprop(blob, newoff, "reg", &cell, sizeof(cell));
+		if (sizecell == 2) {
+			fdt64_t cell[2];
+
+			cell[0] = cpu_to_fdt64(part->offset);
+			cell[1] = cpu_to_fdt64(part->size);
+			ret = fdt_setprop(blob, newoff,
+					  "reg", cell, sizeof(cell));
+		} else {
+			fdt32_t cell[2];
+
+			cell[0] = cpu_to_fdt32(part->offset);
+			cell[1] = cpu_to_fdt32(part->size);
+			ret = fdt_setprop(blob, newoff,
+					  "reg", cell, sizeof(cell));
+		}
+
 		if (ret == -FDT_ERR_NOSPACE) {
 			ret = fdt_increase_size(blob, 512);
 			if (!ret)
-- 
2.17.1



More information about the U-Boot mailing list