[U-Boot] [RESEND-2 PATCH 4/4] sunxi: Enable EMAC on the Bananapi M3

[Chen-Yu Tsai]

From: Chen-Yu Tsai <wens at csie.org>

The Bananapi M3 has an RTL8211E PHY connected to the EMAC using
RGMII. The PHY is powered by DCDC1 through SW @ 3.3V.

This patch enables the EMAC and Realtek PHY drivers in the defconfig.
The device tree file already has the EMAC enabled.

Signed-off-by: Chen-Yu Tsai <wens at csie.org>

---

 configs/Sinovoip_BPI_M3_defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/configs/Sinovoip_BPI_M3_defconfig b/configs/Sinovoip_BPI_M3_defconfig
index 79743a9c9a51..bb2dbb5dd5c2 100644
--- a/configs/Sinovoip_BPI_M3_defconfig
+++ b/configs/Sinovoip_BPI_M3_defconfig
@@ -21,6 +21,8 @@ CONFIG_CONSOLE_MUX=y
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_SPL_EFI_PARTITION is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-bananapi-m3"
+CONFIG_PHY_REALTEK=y
+CONFIG_SUN8I_EMAC=y
 CONFIG_AXP_DCDC5_VOLT=1200
 CONFIG_AXP_DLDO3_VOLT=2500
 CONFIG_AXP_SW_ON=y
-- 
2.20.1