[U-Boot] [PATCH 6/7] arm: sunxi: Enable DM_MMC and DM_SCSI

Jagan Teki jagan at amarulasolutions.com
Fri Apr 12 12:52:35 UTC 2019


- Enable DM_MMC if MMC defined
- Enable DM_SCSI if SCSI defined

globally through Allwinner platform, the effected SoC families
and boards will make use of MMC and SCSI subsystems in driver-model.

Tested DM_MMC in one board from A64, H6, H5, H3, R40, A83T, A20, A10
SoCs.

Cc: Pablo Sebastián Greco <pgreco at centosproject.org>
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
 arch/arm/Kconfig            |  2 ++
 arch/arm/mach-sunxi/Kconfig | 13 -------------
 2 files changed, 2 insertions(+), 13 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4a23e327df..7deae931b1 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -857,6 +857,8 @@ config ARCH_SUNXI
 	select DM_ETH
 	select DM_GPIO
 	select DM_KEYBOARD
+	select DM_MMC if MMC
+	select DM_SCSI if SCSI
 	select DM_SERIAL
 	select DM_USB if DISTRO_DEFAULTS
 	select OF_BOARD_SETUP
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 8110f23ff6..1669e62a6d 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -154,8 +154,6 @@ config MACH_SUN4I
 	bool "sun4i (Allwinner A10)"
 	select CPU_V7A
 	select ARM_CORTEX_CPU_IS_UP
-	select DM_MMC if MMC
-	select DM_SCSI if SCSI
 	select PHY_SUN4I_USB
 	select DRAM_SUN4I
 	select SUNXI_GEN_SUN4I
@@ -165,7 +163,6 @@ config MACH_SUN5I
 	bool "sun5i (Allwinner A13)"
 	select CPU_V7A
 	select ARM_CORTEX_CPU_IS_UP
-	select DM_MMC if MMC
 	select DRAM_SUN4I
 	select PHY_SUN4I_USB
 	select SUNXI_GEN_SUN4I
@@ -178,7 +175,6 @@ config MACH_SUN6I
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
 	select ARCH_SUPPORT_PSCI
-	select DM_MMC if MMC
 	select DRAM_SUN6I
 	select PHY_SUN4I_USB
 	select SUN6I_P2WI
@@ -205,7 +201,6 @@ config MACH_SUN8I_A23
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
 	select ARCH_SUPPORT_PSCI
-	select DM_MMC if MMC
 	select DRAM_SUN8I_A23
 	select PHY_SUN4I_USB
 	select SUNXI_GEN_SUN6I
@@ -219,7 +214,6 @@ config MACH_SUN8I_A33
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
 	select ARCH_SUPPORT_PSCI
-	select DM_MMC if MMC
 	select DRAM_SUN8I_A33
 	select PHY_SUN4I_USB
 	select SUNXI_GEN_SUN6I
@@ -230,7 +224,6 @@ config MACH_SUN8I_A33
 config MACH_SUN8I_A83T
 	bool "sun8i (Allwinner A83T)"
 	select CPU_V7A
-	select DM_MMC if MMC
 	select DRAM_SUN8I_A83T
 	select PHY_SUN4I_USB
 	select SUNXI_GEN_SUN6I
@@ -246,7 +239,6 @@ config MACH_SUN8I_H3
 	select ARCH_SUPPORT_PSCI
 	select MACH_SUNXI_H3_H5
 	select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
-	select DM_MMC if MMC
 
 config MACH_SUN8I_R40
 	bool "sun8i (Allwinner R40)"
@@ -265,7 +257,6 @@ config MACH_SUN8I_V3S
 	select CPU_V7_HAS_NONSEC
 	select CPU_V7_HAS_VIRT
 	select ARCH_SUPPORT_PSCI
-	select DM_MMC if MMC
 	select SUNXI_GEN_SUN6I
 	select SUNXI_DRAM_DW
 	select SUNXI_DRAM_DW_16BIT
@@ -280,13 +271,11 @@ config MACH_SUN9I
 	select SUNXI_GEN_SUN6I
 	select SUN8I_RSB
 	select SUPPORT_SPL
-	select DM_MMC if MMC
 
 config MACH_SUN50I
 	bool "sun50i (Allwinner A64)"
 	select ARM64
 	select DM_I2C
-	select DM_MMC if MMC
 	select PHY_SUN4I_USB
 	select SUN6I_PRCM
 	select SUNXI_DE2
@@ -303,7 +292,6 @@ config MACH_SUN50I_H5
 	bool "sun50i (Allwinner H5)"
 	select ARM64
 	select MACH_SUNXI_H3_H5
-	select DM_MMC if MMC
 	select FIT
 	select SPL_LOAD_FIT
 
@@ -311,7 +299,6 @@ config MACH_SUN50I_H6
 	bool "sun50i (Allwinner H6)"
 	select ARM64
 	select SUPPORT_SPL
-	select DM_MMC if MMC
 	select FIT
 	select SPL_LOAD_FIT
 	select DRAM_SUN50I_H6
-- 
2.18.0.321.gffc6fa0e3



More information about the U-Boot mailing list