[U-Boot] [PATCH v2 0/3] Add Beelink GS1 Board

[Clément Péron]

This serie introduce the Beelink GS1 board with a patch for
the reset on Allwinner H6.

Thanks to Jagan Teki most of the Beelink GS1 device-tree is
taken from the Orange Pi boards.

Changes with v1:
 - Add bus-width for mmc2 node
 - Add sha1 in the sync dts commit

Clément Péron (3):
  arm: dts: h6: sync with dts with Linux sunxi
  arm: dts: h6: Add Beelink GS1 initial support
  arm: sunxi: h6: fix reset using r_wdog

 arch/arm/dts/Makefile                         |   1 +
 arch/arm/dts/sun50i-h6-beelink-gs1.dts        | 184 ++++++++++++++++++
 arch/arm/dts/sun50i-h6-orangepi.dtsi          |   2 -
 arch/arm/dts/sun50i-h6-pine-h64.dts           |   4 -
 arch/arm/dts/sun50i-h6.dtsi                   |  16 +-
 .../include/asm/arch-sunxi/cpu_sun50i_h6.h    |   1 +
 arch/arm/mach-sunxi/board.c                   |   9 +-
 configs/beelink_gs1_defconfig                 |  15 ++
 8 files changed, 218 insertions(+), 14 deletions(-)
 create mode 100644 arch/arm/dts/sun50i-h6-beelink-gs1.dts
 create mode 100644 configs/beelink_gs1_defconfig

-- 
2.17.1