[U-Boot] [U-Boot, v3, 7/7] ARM: dts: k2g-ice: add dt node for netcp

[Tom Rini]

On Thu, Feb 21, 2019 at 12:02:07PM -0500, Murali Karicheri wrote:

> This patch adds dt node for DP83867 phy used on K2G ICE board and
> also enable netcp device nodes for the board.
> 
> EVM hardware spec recommends to add 0.25 nsec delay in the tx
> direction and 2.25 nsec delay in the rx direction for internal
> delay in the clock path to be on the safer side.
> 
> The board straps RX_DV/RX_CTRL pin of on board DP83867 phy in mode
> 1. Unfortunately, the phy data manual disallows this. Add
> ti,dp83867-rxctrl-strap-quirk in the phy node to allow software to
> enable workaround suggested for this incorrect strap setting. This
> ensures proper operation of this PHY.
> 
> The dts bindings are kept in sync with that from 4.14.y linux
> kernel. This required the pinmux device related bindings to be
> commented out to allow for compilation.
> 
> Signed-off-by: Murali Karicheri <m-karicheri2 at ti.com>
> Acked-by: Joe Hershberger <joe.hershberger at ni.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190412/fc27b75f/attachment.sig>