[U-Boot] [PATCH V2 0/5] Convert Pico i.MX7 to DM

[Stefano Babic]

On 15/04/19 10:02, jorisoffouga wrote:
> Hi Stefano
> 
> I think this series should be applied for 2019.04 ?


2019.04 is out, this goes to 2019.07

Stefano

> 
> BR
> 
> Joris
> 
> Le 05/04/2019 à 15:28, Joris OFFOUGA a écrit :
>>
>>
>> Le ven. 5 avr. 2019 à 15:07, Fabio Estevam <festevam at gmail.com
>> <mailto:festevam at gmail.com>> a écrit :
>>
>>     Hi Joris,
>>
>> Hi Fabio, 
>>
>>     On Thu, Apr 4, 2019 at 9:01 AM Joris Offouga
>>     <offougajoris at gmail.com <mailto:offougajoris at gmail.com>> wrote:
>>     >
>>     > This series convert Pico i.MX7 and variant board to DM.
>>     > The following options have been enabled:
>>     > -CONFIG_DM_GPIO
>>     > -CONFIG_DM_EMMC
>>     >
>>     > Signed-off-by: Joris Offouga <offougajoris at gmail.com
>>     <mailto:offougajoris at gmail.com>>
>>     > ---
>>     >
>>     > Change in v2:
>>     > - add missing dtb in Makefile
>>
>>     Thanks for working on this series.
>>
>> It was a pleasure I learned a lot 😁
>>
>>
>>     My previous Tested-by tag still applies here as well :-)
>>
>>     For the entire series:
>>
>>     Tested-by: Fabio Estevam <festevam at gmail.com
>>     <mailto:festevam at gmail.com>>
>>
>> Thanks Fabio, 
>>
>>


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================