[U-Boot] [PATCH v5 06/27] ARM: tegra: Guard clock code with a Kconfig symbol

[Thierry Reding]

From: Thierry Reding <treding at nvidia.com>

Clock code is not relevant on all Tegra SoC generations, so guard it
with a Kconfig symbol that can be selected by the generations that need
it.

This is in preparation for unifying Tegra186 code with the code used on
older generations.

Signed-off-by: Thierry Reding <treding at nvidia.com>
---
 arch/arm/mach-tegra/Kconfig  |  5 +++++
 arch/arm/mach-tegra/Makefile |  2 +-
 arch/arm/mach-tegra/board.c  |  2 ++
 arch/arm/mach-tegra/board2.c | 12 ++++++++++--
 4 files changed, 18 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 86b1cd11f752..ee078fec9adc 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -12,6 +12,9 @@ config SPL_LIBGENERIC_SUPPORT
 config SPL_SERIAL_SUPPORT
 	default y
 
+config TEGRA_CLKRST
+	bool
+
 config TEGRA_IVC
 	bool "Tegra IVC protocol"
 	help
@@ -55,6 +58,7 @@ config TEGRA_ARMV7_COMMON
 	select SPL
 	select SPL_BOARD_INIT if SPL
 	select SUPPORT_SPL
+	select TEGRA_CLKRST
 	select TEGRA_COMMON
 	select TEGRA_GPIO
 	select TEGRA_NO_BPMP
@@ -100,6 +104,7 @@ config TEGRA124
 config TEGRA210
 	bool "Tegra210 family"
 	select TEGRA_ARMV8_COMMON
+	select TEGRA_CLKRST
 	select TEGRA_GPIO
 	select TEGRA_NO_BPMP
 
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index d4b4666fb1e2..0e812818d7a2 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -16,7 +16,7 @@ endif
 obj-y += ap.o
 obj-y += board.o board2.o
 obj-y += cache.o
-obj-y += clock.o
+obj-$(CONFIG_TEGRA_CLKRST) += clock.o
 obj-y += pinmux-common.o
 obj-y += powergate.o
 obj-y += xusb-padctl-dummy.o
diff --git a/arch/arm/mach-tegra/board.c b/arch/arm/mach-tegra/board.c
index f8fc042a1dcc..ecd5001de4c5 100644
--- a/arch/arm/mach-tegra/board.c
+++ b/arch/arm/mach-tegra/board.c
@@ -9,7 +9,9 @@
 #include <ns16550.h>
 #include <spl.h>
 #include <asm/io.h>
+#if IS_ENABLED(CONFIG_TEGRA_CLKRST)
 #include <asm/arch/clock.h>
+#endif
 #include <asm/arch/funcmux.h>
 #include <asm/arch/mc.h>
 #include <asm/arch/tegra.h>
diff --git a/arch/arm/mach-tegra/board2.c b/arch/arm/mach-tegra/board2.c
index b8d5ef0322cb..b94077221f77 100644
--- a/arch/arm/mach-tegra/board2.c
+++ b/arch/arm/mach-tegra/board2.c
@@ -22,7 +22,9 @@
 #include <asm/arch-tegra/gpu.h>
 #include <asm/arch-tegra/usb.h>
 #include <asm/arch-tegra/xusb-padctl.h>
+#if IS_ENABLED(CONFIG_TEGRA_CLKRST)
 #include <asm/arch/clock.h>
+#endif
 #include <asm/arch/funcmux.h>
 #include <asm/arch/pinmux.h>
 #include <asm/arch/tegra.h>
@@ -109,8 +111,10 @@ int board_init(void)
 	__maybe_unused int board_id;
 
 	/* Do clocks and UART first so that printf() works */
+#if IS_ENABLED(CONFIG_TEGRA_CLKRST)
 	clock_init();
 	clock_verify();
+#endif
 
 	tegra_gpu_config();
 
@@ -181,8 +185,10 @@ void gpio_early_init(void) __attribute__((weak, alias("__gpio_early_init")));
 
 int board_early_init_f(void)
 {
+#if IS_ENABLED(CONFIG_TEGRA_CLKRST)
 	if (!clock_early_init_done())
 		clock_early_init();
+#endif
 
 #if defined(CONFIG_TEGRA_DISCONNECT_UDC_ON_BOOT)
 #define USBCMD_FS2 (1 << 15)
@@ -193,10 +199,12 @@ int board_early_init_f(void)
 #endif
 
 	/* Do any special system timer/TSC setup */
-#if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE)
+#if IS_ENABLED(CONFIG_TEGRA_CLKRST)
+#  if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE)
 	if (!tegra_cpu_is_non_secure())
-#endif
+#  endif
 		arch_timer_init();
+#endif
 
 	pinmux_init();
 	board_init_uart_f();
-- 
2.21.0