[U-Boot] [PATCH v5 23/27] p2371-2180: Add support for framebuffer carveouts

Thierry Reding thierry.reding at gmail.com
Mon Apr 15 09:32:35 UTC 2019


From: Thierry Reding <treding at nvidia.com>

If early firmware initialized the display hardware and the display
controllers are scanning out a framebuffer (e.g. a splash screen), make
sure to pass information about the memory location of that framebuffer
to the kernel before booting to avoid the kernel from using that memory
for the buddy allocator.

This same mechanism can also be used in the kernel to set up early SMMU
mappings and avoid SMMU faults caused by the display controller reading
from memory for which it has no mapping.

Reviewed-by: Simon Glass <sjg at chromium.org>
Signed-off-by: Thierry Reding <treding at nvidia.com>
---
Changes in v4:
- add reviewed-by from Simon

 board/nvidia/p2371-2180/p2371-2180.c | 47 ++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/board/nvidia/p2371-2180/p2371-2180.c b/board/nvidia/p2371-2180/p2371-2180.c
index a444d692d7ea..4985302d6bc2 100644
--- a/board/nvidia/p2371-2180/p2371-2180.c
+++ b/board/nvidia/p2371-2180/p2371-2180.c
@@ -6,6 +6,7 @@
 
 #include <common.h>
 #include <environment.h>
+#include <fdtdec.h>
 #include <i2c.h>
 #include <linux/libfdt.h>
 #include <asm/arch/gpio.h>
@@ -138,9 +139,55 @@ static void ft_mac_address_setup(void *fdt)
 	}
 }
 
+static int ft_copy_carveout(void *dst, const void *src, const char *node)
+{
+	struct fdt_memory fb;
+	int err;
+
+	err = fdtdec_get_carveout(src, node, "memory-region", 0, &fb);
+	if (err < 0) {
+		if (err != -FDT_ERR_NOTFOUND)
+			printf("failed to get carveout for %s: %d\n", node,
+			       err);
+
+		return err;
+	}
+
+	err = fdtdec_set_carveout(dst, node, "memory-region", 0, "framebuffer",
+				  &fb);
+	if (err < 0) {
+		printf("failed to set carveout for %s: %d\n", node, err);
+		return err;
+	}
+
+	return 0;
+}
+
+static void ft_carveout_setup(void *fdt)
+{
+	const void *cboot_fdt = (const void *)cboot_boot_x0;
+	static const char * const nodes[] = {
+		"/host1x at 50000000/dc at 54200000",
+		"/host1x at 50000000/dc at 54240000",
+	};
+	unsigned int i;
+	int err;
+
+	for (i = 0; i < ARRAY_SIZE(nodes); i++) {
+		err = ft_copy_carveout(fdt, cboot_fdt, nodes[i]);
+		if (err < 0) {
+			if (err != -FDT_ERR_NOTFOUND)
+				printf("failed to copy carveout for %s: %d\n",
+				       nodes[i], err);
+			continue;
+		}
+	}
+}
+
 int ft_board_setup(void *fdt, bd_t *bd)
 {
 	ft_mac_address_setup(fdt);
+	ft_carveout_setup(fdt);
 
 	return 0;
 }
-- 
2.21.0



More information about the U-Boot mailing list