[U-Boot] [PATCH] arm64: zynqmp: fix preprocessor check for SPL_ZYNQMP_TWO_SDHCI

[Luca Ceresoli]

A missing CONFIG_ prefix while checking for this Kconfig variable makes the
check always fail. Fix it. While there also switch from the '#if defined'
form to the '#ifdef' form as the other checks in this function.

Fixes: 35e2b92344b1 ("arm64: zynqmp: Fix logic around CONFIG_ZYNQ_SDHCI")

Signed-off-by: Luca Ceresoli <luca at lucaceresoli.net>
---
 arch/arm/mach-zynqmp/spl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-zynqmp/spl.c b/arch/arm/mach-zynqmp/spl.c
index f6f5414201b5..b7d2ecdf7257 100644
--- a/arch/arm/mach-zynqmp/spl.c
+++ b/arch/arm/mach-zynqmp/spl.c
@@ -85,7 +85,7 @@ u32 spl_boot_device(void)
 	case SD_MODE1:
 	case SD1_LSHFT_MODE: /* not working on silicon v1 */
 /* if both controllers enabled, then these two are the second controller */
-#if defined(SPL_ZYNQMP_TWO_SDHCI)
+#ifdef CONFIG_SPL_ZYNQMP_TWO_SDHCI
 		return BOOT_DEVICE_MMC2;
 /* else, fall through, the one SDHCI controller that is enabled is number 1 */
 #endif
-- 
2.21.0