[U-Boot] [PATCH] mmc: support hs400 enhanced strobe mode
Peng Fan
peng.fan at nxp.com
Tue Apr 16 01:33:16 UTC 2019
eMMC 5.1+ supports HS400 Enhances Strobe mode without the need for
tuning procedure.
The flow is as following:
- set HS_TIMIMG (Highspeed)
- Host change freq to <= 52Mhz
- set the bus width to Enhanced strobe and DDR8Bit(CMD6),
EXT_CSD[183] = 0x86 instead of 0x80
- set HS_TIMING to 0x3 (HS400)
- Host change freq to <= 200Mhz
- Host select HS400 enhanced strobe complete
Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
This is actually a resend of https://patchwork.ozlabs.org/patch/1018188/
which got no response.
Rebased on master.
drivers/mmc/Kconfig | 12 ++++++++
drivers/mmc/mmc-uclass.c | 15 +++++++++
drivers/mmc/mmc.c | 79 +++++++++++++++++++++++++++++++++++++++++++++++-
include/mmc.h | 15 +++++++++
4 files changed, 120 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 04a4e7716f..3ef7580a43 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -111,6 +111,18 @@ config SPL_MMC_UHS_SUPPORT
cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
frequency can go up to 208MHz (SDR104)
+config MMC_HS400_ES_SUPPORT
+ bool "enable HS400 Enhanced Strobe support"
+ help
+ The HS400 Enhanced Strobe mode is support by some eMMC. The bus frequency is up to
+ 200MHz. This mode does not tune the IO.
+
+config SPL_MMC_HS400_ES_SUPPORT
+ bool "enable HS400 Enhanced Strobe support in SPL"
+ help
+ The HS400 Enhanced Strobe mode is support by some eMMC. The bus frequency is up to
+ 200MHz. This mode does not tune the IO.
+
config MMC_HS400_SUPPORT
bool "enable HS400 support"
select MMC_HS200_SUPPORT
diff --git a/drivers/mmc/mmc-uclass.c b/drivers/mmc/mmc-uclass.c
index a9c8f335c1..5d04fc6f0a 100644
--- a/drivers/mmc/mmc-uclass.c
+++ b/drivers/mmc/mmc-uclass.c
@@ -120,6 +120,21 @@ int mmc_execute_tuning(struct mmc *mmc, uint opcode)
}
#endif
+#if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT)
+void dm_mmc_set_enhanced_strobe(struct udevice *dev)
+{
+ struct dm_mmc_ops *ops = mmc_get_ops(dev);
+
+ if (ops->set_enhanced_strobe)
+ ops->set_enhanced_strobe(dev);
+}
+
+void mmc_set_enhanced_strobe(struct mmc *mmc)
+{
+ dm_mmc_set_enhanced_strobe(mmc->dev);
+}
+#endif
+
int mmc_of_parse(struct udevice *dev, struct mmc_config *cfg)
{
int val;
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 456c1b4cc9..1a7194ff73 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -148,6 +148,7 @@ const char *mmc_mode_name(enum bus_mode mode)
[MMC_DDR_52] = "MMC DDR52 (52MHz)",
[MMC_HS_200] = "HS200 (200MHz)",
[MMC_HS_400] = "HS400 (200MHz)",
+ [MMC_HS_400_ES] = "HS400ES (200MHz)",
};
if (mode >= MMC_MODES_END)
@@ -173,6 +174,7 @@ static uint mmc_mode2freq(struct mmc *mmc, enum bus_mode mode)
[UHS_SDR104] = 208000000,
[MMC_HS_200] = 200000000,
[MMC_HS_400] = 200000000,
+ [MMC_HS_400_ES] = 200000000,
};
if (mode == MMC_LEGACY)
@@ -788,6 +790,11 @@ static int mmc_set_card_speed(struct mmc *mmc, enum bus_mode mode,
case MMC_HS_400:
speed_bits = EXT_CSD_TIMING_HS400;
break;
+#endif
+#if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT)
+ case MMC_HS_400_ES:
+ speed_bits = EXT_CSD_TIMING_HS400;
+ break;
#endif
case MMC_LEGACY:
speed_bits = EXT_CSD_TIMING_LEGACY;
@@ -859,7 +866,8 @@ static int mmc_get_capabilities(struct mmc *mmc)
mmc->card_caps |= MMC_MODE_HS200;
}
#endif
-#if CONFIG_IS_ENABLED(MMC_HS400_SUPPORT)
+#if (IS_ENABLED(CONFIG_MMC_HS400_SUPPORT) || \
+ IS_ENABLED(CONFIG_MMC_HS400_ES_SUPPORT))
if (cardtype & (EXT_CSD_CARD_TYPE_HS400_1_2V |
EXT_CSD_CARD_TYPE_HS400_1_8V)) {
mmc->card_caps |= MMC_MODE_HS400;
@@ -873,6 +881,13 @@ static int mmc_get_capabilities(struct mmc *mmc)
if (cardtype & EXT_CSD_CARD_TYPE_26)
mmc->card_caps |= MMC_MODE_HS;
+#if IS_ENABLED(CONFIG_MMC_HS400_ES_SUPPORT)
+ if (ext_csd[EXT_CSD_STROBE_SUPPORT] &&
+ (mmc->card_caps & MMC_MODE_HS400)) {
+ mmc->card_caps |= MMC_MODE_HS400_ES;
+ }
+#endif
+
return 0;
}
#endif
@@ -1778,6 +1793,7 @@ static int mmc_set_lowest_voltage(struct mmc *mmc, enum bus_mode mode,
u32 card_mask = 0;
switch (mode) {
+ case MMC_HS_400_ES:
case MMC_HS_400:
case MMC_HS_200:
if (mmc->cardtype & (EXT_CSD_CARD_TYPE_HS200_1_8V |
@@ -1820,6 +1836,12 @@ static inline int mmc_set_lowest_voltage(struct mmc *mmc, enum bus_mode mode,
#endif
static const struct mode_width_tuning mmc_modes_by_pref[] = {
+#if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT)
+ {
+ .mode = MMC_HS_400_ES,
+ .widths = MMC_MODE_8BIT,
+ },
+#endif
#if CONFIG_IS_ENABLED(MMC_HS400_SUPPORT)
{
.mode = MMC_HS_400,
@@ -1917,6 +1939,54 @@ static int mmc_select_hs400(struct mmc *mmc)
}
#endif
+#if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT)
+#if !CONFIG_IS_ENABLED(DM_MMC)
+static void mmc_set_enhanced_strobe(struct mmc *mmc)
+{
+}
+#endif
+
+static int mmc_select_hs400es(struct mmc *mmc)
+{
+ int err;
+
+ err = mmc_set_card_speed(mmc, MMC_HS);
+ if (err)
+ return err;
+
+ /* configure the bus mode (host) */
+ mmc_select_mode(mmc, MMC_HS);
+ mmc_set_clock(mmc, mmc->tran_speed, false);
+
+ err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH,
+ EXT_CSD_BUS_WIDTH_8 | EXT_CSD_DDR_FLAG |
+ EXT_CSD_BUS_WIDTH_STROBE);
+ if (err) {
+ printf("switch to bus width for hs400 failed\n");
+ return err;
+ }
+ /* TODO: driver strength */
+ err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING,
+ EXT_CSD_TIMING_HS400 | (0 << EXT_CSD_DRV_STR_SHIFT));
+ if (err) {
+ printf("switch to hs400 failed\n");
+ return err;
+ }
+
+ mmc_select_mode(mmc, MMC_HS_400_ES);
+ mmc_set_clock(mmc, mmc->tran_speed, false);
+ mmc_set_enhanced_strobe(mmc);
+
+ return 0;
+}
+
+#else
+static int mmc_select_hs400es(struct mmc *mmc)
+{
+ return -ENOTSUPP;
+}
+#endif
+
#define for_each_supported_width(caps, ddr, ecbv) \
for (ecbv = ext_csd_bus_width;\
ecbv < ext_csd_bus_width + ARRAY_SIZE(ext_csd_bus_width);\
@@ -1988,6 +2058,13 @@ static int mmc_select_mode_and_width(struct mmc *mmc, uint card_caps)
printf("Select HS400 failed %d\n", err);
goto error;
}
+ } else if (mwt->mode == MMC_HS_400_ES) {
+ err = mmc_select_hs400es(mmc);
+ if (err) {
+ printf("Select HS400ES failed %d\n",
+ err);
+ goto error;
+ }
} else {
/* configure the bus speed (card) */
err = mmc_set_card_speed(mmc, mwt->mode, false);
diff --git a/include/mmc.h b/include/mmc.h
index 1f30f71d25..0d480b56a9 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -65,6 +65,7 @@
#define MMC_MODE_DDR_52MHz MMC_CAP(MMC_DDR_52)
#define MMC_MODE_HS200 MMC_CAP(MMC_HS_200)
#define MMC_MODE_HS400 MMC_CAP(MMC_HS_400)
+#define MMC_MODE_HS400_ES MMC_CAP(MMC_HS_400_ES)
#define MMC_MODE_8BIT BIT(30)
#define MMC_MODE_4BIT BIT(29)
@@ -219,6 +220,7 @@ static inline bool mmc_is_tuning_cmd(uint cmdidx)
#define EXT_CSD_BOOT_BUS_WIDTH 177
#define EXT_CSD_PART_CONF 179 /* R/W */
#define EXT_CSD_BUS_WIDTH 183 /* R/W */
+#define EXT_CSD_STROBE_SUPPORT 184 /* R/W */
#define EXT_CSD_HS_TIMING 185 /* R/W */
#define EXT_CSD_REV 192 /* RO */
#define EXT_CSD_CARD_TYPE 196 /* RO */
@@ -260,11 +262,13 @@ static inline bool mmc_is_tuning_cmd(uint cmdidx)
#define EXT_CSD_DDR_BUS_WIDTH_4 5 /* Card is in 4 bit DDR mode */
#define EXT_CSD_DDR_BUS_WIDTH_8 6 /* Card is in 8 bit DDR mode */
#define EXT_CSD_DDR_FLAG BIT(2) /* Flag for DDR mode */
+#define EXT_CSD_BUS_WIDTH_STROBE BIT(7) /* Enhanced strobe mode */
#define EXT_CSD_TIMING_LEGACY 0 /* no high speed */
#define EXT_CSD_TIMING_HS 1 /* HS */
#define EXT_CSD_TIMING_HS200 2 /* HS200 */
#define EXT_CSD_TIMING_HS400 3 /* HS400 */
+#define EXT_CSD_DRV_STR_SHIFT 4 /* Driver Strength shift */
#define EXT_CSD_BOOT_ACK_ENABLE (1 << 6)
#define EXT_CSD_BOOT_PARTITION_ENABLE (1 << 3)
@@ -461,6 +465,11 @@ struct dm_mmc_ops {
*/
int (*wait_dat0)(struct udevice *dev, int state, int timeout);
#endif
+
+#if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT)
+ /* set_enhanced_strobe() - set HS400 enhanced strobe */
+ void (*set_enhanced_strobe)(struct udevice *dev);
+#endif
};
#define mmc_get_ops(dev) ((struct dm_mmc_ops *)(dev)->driver->ops)
@@ -481,6 +490,7 @@ int mmc_getcd(struct mmc *mmc);
int mmc_getwp(struct mmc *mmc);
int mmc_execute_tuning(struct mmc *mmc, uint opcode);
int mmc_wait_dat0(struct mmc *mmc, int state, int timeout);
+void mmc_set_enhanced_strobe(struct mmc *mmc);
#else
struct mmc_ops {
@@ -526,6 +536,7 @@ enum bus_mode {
UHS_SDR104,
MMC_HS_200,
MMC_HS_400,
+ MMC_HS_400_ES,
MMC_MODES_END
};
@@ -543,6 +554,10 @@ static inline bool mmc_is_mode_ddr(enum bus_mode mode)
#if CONFIG_IS_ENABLED(MMC_HS400_SUPPORT)
else if (mode == MMC_HS_400)
return true;
+#endif
+#if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT)
+ else if (mode == MMC_HS_400_ES)
+ return true;
#endif
else
return false;
--
2.16.4
More information about the U-Boot
mailing list