[U-Boot] [GIT PULL] Xilinx patches for v2019.04
Michal Simek
monstr at monstr.eu
Wed Apr 17 09:05:13 UTC 2019
Hi Tom,
I am sending you some patches related to Xilinx devices and fpga
framework. There are minimal changes in xilinx drivers and one patch
which fixes EXT_DTB usage reviewed by Simon.
Builds look good.
https://travis-ci.org/michalsimek/u-boot/builds/520747035
Thanks,
Michal
The following changes since commit 216800acf1fbf9f498455bf3c92d4513d9a4c681:
Merge branch 'master' of git://git.denx.de/u-boot-spi (2019-04-14
00:03:06 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-microblaze.git tags/xilinx-for-v2019.07
for you to fetch changes up to 350cfe79a8fb288e9066d5668af7c5ab6857edea:
arm64: zynqmp: fix preprocessor check for SPL_ZYNQMP_TWO_SDHCI
(2019-04-16 11:52:02 +0200)
----------------------------------------------------------------
Xilinx/FPGA changes for v2019.07
fpga:
- Add support for external data in FIT
- Extend testing for external data case
- Inform user about a need to run post config on Zynq
arm:
- Tune zynq command functions
- Fix internal variable setting
arm64:
- Add support for zc39dr decoding
- Disable WDT for zcu100
- Small changes in reset_reason()
- Some DT changes (spi)
- Tune qspi-mini configuration
- Remove useless eeprom setting
- Fix two sdhci boot case
spi:
- Fix tap delay programming
clk:
- Enable i2c in SPL
net:
- Fix gem phydev handling
- Remove phy detection code from gem driver
general:
- Correct EXT_DTB usage for MULTI_DTB_FIT configuration
----------------------------------------------------------------
Hannes Schmelzer (1):
ARM: zynq: Add missing i2c get_rate for fixing i2c SPL
Luca Ceresoli (1):
arm64: zynqmp: fix preprocessor check for SPL_ZYNQMP_TWO_SDHCI
Melin Tomas (1):
ARM: zynq: fix environment command syntax
Michal Simek (6):
test: py: Extend fpga test with fit image with external data
arm64: zynqmp: Disable WDT for zcu100
arm64: zynqmp: Add debug message about clearing BSS
Makefile: Prioritize external dtb if defined
net: gem: Remove phy autodetection code
arm64: zynqmp: Remove eeprom setting
Siva Durga Prasad Paladugu (7):
spi: zynqmp_gqspi: Fix tap delay values at 100MHz and 150MHz
arm64: zynqmp: Add spi-flash compatible string to flash node
arm64: zynqmp: Define label for flash node
arm64: xilinx: zynqmp: Remove unneeded configs
arm64: zynqmp: Add idcode for new RFSoC silicon ZU39DR
arm: zynq: Add an info message about post config
net: zynq_gem: Modify phy supported features after max-speed was set
T Karthik Reddy (2):
arm64: zynqmp: Use zynqmp_mmio_read/write functions
ARM: zynq: Check zynq aes & rsa command parameters count
Tien Fong Chee (2):
fpga: Add support for getting external data address and length
fpga: Replace char * with const char * for filename
Makefile | 5 +++++
arch/arm/dts/zynqmp-mini-qspi.dts | 4 ++--
arch/arm/mach-zynqmp/spl.c | 3 ++-
board/xilinx/zynq/cmds.c | 9 ++++++++-
board/xilinx/zynqmp/zynqmp.c | 20 ++++++++++++++------
cmd/fpga.c | 6 +++---
configs/xilinx_zynqmp_mini_qspi_defconfig | 2 ++
configs/xilinx_zynqmp_zcu100_revC_defconfig | 2 --
drivers/clk/clk_zynq.c | 2 ++
drivers/fpga/zynqpl.c | 5 ++++-
drivers/net/zynq_gem.c | 53
+++--------------------------------------------------
drivers/spi/zynqmp_gqspi.c | 4 ++--
include/configs/xilinx_zynqmp.h | 9 ---------
include/configs/zynq-common.h | 8 ++++----
include/fpga.h | 2 +-
test/py/tests/test_fpga.py | 13 +++++++++++++
16 files changed, 65 insertions(+), 82 deletions(-)
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190417/c2a19efb/attachment.sig>
More information about the U-Boot
mailing list