[U-Boot] [PATCH] mtd: nand: raw: Fix CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT behaviour

[Gregory CLEMENT]

The purpose of "mtd: nand: raw: allow to disable unneeded ECC layouts"
was to allow disabling the default ECC layouts if a driver is known to
provide its own ECC layout. However, this commit did the opposite and
disbaled the default layout whqant it was _not_ selectec.

It breaks all the driver nand that not providing their ecc layout, this
patch fix this sitution.

It was tested with the lpc32xx_nand_slc driver.

Fixes: a38c3af868 ("mtd: nand: raw: allow to disable unneeded ECC layouts")
Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
---
 drivers/mtd/nand/raw/nand_base.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 6d2ff58d86..dc4576a3a1 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -47,7 +47,7 @@
 #include <linux/errno.h>
 
 /* Define default oob placement schemes for large and small page devices */
-#ifdef CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT
+#ifndef CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT
 static struct nand_ecclayout nand_oob_8 = {
 	.eccbytes = 3,
 	.eccpos = {0, 1, 2},
@@ -4341,7 +4341,7 @@ int nand_scan_tail(struct mtd_info *mtd)
 	 */
 	if (!ecc->layout && (ecc->mode != NAND_ECC_SOFT_BCH)) {
 		switch (mtd->oobsize) {
-#ifdef CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT
+#ifndef CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT
 		case 8:
 			ecc->layout = &nand_oob_8;
 			break;
-- 
2.20.1