[U-Boot] [PATCH v1 1/6] dm: arm: imx: cx9020: enable DM_GPIO

[linux-kernel-dev at beckhoff.com]

From: Steffen Dirkwinkel <s.dirkwinkel at beckhoff.com>

Switch to DM_GPIO and add gpio_request where necessary.
This is needed for DM_VIDEO and fixes an issue with sd card detection
which was introduced by the combination of these commits:

commit 7a0425dd969c ("mmc: fsl_esdhc: make get_cd work well in dm_mmc_ops")
commit 7e04b4c751a1 ("dm: arm: imx: migrate cx9020 to CONFIG_DM_MMC")

Acked-by: Patrick Bruenn <p.bruenn at beckhoff.com>
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel at beckhoff.com>
---

 board/beckhoff/mx53cx9020/mx53cx9020.c       | 25 ++++++++++++++++----
 board/beckhoff/mx53cx9020/mx53cx9020_video.c |  1 +
 configs/mx53cx9020_defconfig                 |  2 ++
 3 files changed, 24 insertions(+), 4 deletions(-)

diff --git a/board/beckhoff/mx53cx9020/mx53cx9020.c b/board/beckhoff/mx53cx9020/mx53cx9020.c
index 79d8a62cf1b..79ea4560283 100644
--- a/board/beckhoff/mx53cx9020/mx53cx9020.c
+++ b/board/beckhoff/mx53cx9020/mx53cx9020.c
@@ -91,6 +91,9 @@ void weim_cs0_settings(u32 mode)
 
 static void setup_gpio_eim(void)
 {
+	gpio_request(GPIO_C3_STATUS, "GPIO_C3_STATUS");
+	gpio_request(GPIO_C3_DONE, "GPIO_C3_DONE");
+	gpio_request(GPIO_C3_CONFIG, "GPIO_C3_CONFIG");
 	gpio_direction_input(GPIO_C3_STATUS);
 	gpio_direction_input(GPIO_C3_DONE);
 	gpio_direction_output(GPIO_C3_CONFIG, 1);
@@ -100,6 +103,7 @@ static void setup_gpio_eim(void)
 
 static void setup_gpio_sups(void)
 {
+	gpio_request(GPIO_SUPS_INT, "GPIO_SUPS_INT");
 	gpio_direction_input(GPIO_SUPS_INT);
 
 	static const int BLINK_INTERVALL = 50000;
@@ -116,6 +120,16 @@ static void setup_gpio_sups(void)
 
 static void setup_gpio_leds(void)
 {
+	gpio_request(GPIO_LED_SD2_R, "GPIO_LED_SD2_R");
+	gpio_request(GPIO_LED_SD2_B, "GPIO_LED_SD2_B");
+	gpio_request(GPIO_LED_SD2_G, "GPIO_LED_SD2_G");
+	gpio_request(GPIO_LED_SD1_R, "GPIO_LED_SD1_R");
+	gpio_request(GPIO_LED_SD1_B, "GPIO_LED_SD1_B");
+	gpio_request(GPIO_LED_SD1_G, "GPIO_LED_SD1_G");
+	gpio_request(GPIO_LED_PWR_R, "GPIO_LED_PWR_R");
+	gpio_request(GPIO_LED_PWR_B, "GPIO_LED_PWR_B");
+	gpio_request(GPIO_LED_PWR_G, "GPIO_LED_PWR_G");
+
 	gpio_direction_output(GPIO_LED_SD2_R, 0);
 	gpio_direction_output(GPIO_LED_SD2_B, 0);
 	gpio_direction_output(GPIO_LED_SD2_G, 0);
@@ -147,6 +161,8 @@ int board_mmc_getcd(struct mmc *mmc)
 	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
 	int ret;
 
+	gpio_request(GPIO_SD1_CD, "GPIO_SD1_CD");
+	gpio_request(GPIO_SD2_CD, "GPIO_SD2_CD");
 	gpio_direction_input(GPIO_SD1_CD);
 	gpio_direction_input(GPIO_SD2_CD);
 
@@ -212,10 +228,6 @@ static void clock_1GHz(void)
 
 int board_early_init_f(void)
 {
-	setup_gpio_leds();
-	setup_gpio_sups();
-	setup_gpio_eim();
-	setup_iomux_lcd();
 
 	return 0;
 }
@@ -235,6 +247,11 @@ int board_init(void)
 
 	mxc_set_sata_internal_clock();
 
+	setup_gpio_leds();
+	setup_gpio_sups();
+	setup_gpio_eim();
+	setup_iomux_lcd();
+
 	return 0;
 }
 
diff --git a/board/beckhoff/mx53cx9020/mx53cx9020_video.c b/board/beckhoff/mx53cx9020/mx53cx9020_video.c
index 4055bccc2b7..85f1cdae8af 100644
--- a/board/beckhoff/mx53cx9020/mx53cx9020_video.c
+++ b/board/beckhoff/mx53cx9020/mx53cx9020_video.c
@@ -36,6 +36,7 @@ void setup_iomux_lcd(void)
 {
 	/* Turn on DVI_PWD */
 	imx_iomux_v3_setup_pad(MX53_PAD_CSI0_DAT15__GPIO6_1);
+	gpio_request(CX9020_DVI_PWD, "CX9020_DVI_PWD");
 	gpio_direction_output(CX9020_DVI_PWD, 1);
 }
 
diff --git a/configs/mx53cx9020_defconfig b/configs/mx53cx9020_defconfig
index 831d50925f3..93c113aba73 100644
--- a/configs/mx53cx9020_defconfig
+++ b/configs/mx53cx9020_defconfig
@@ -24,7 +24,9 @@ CONFIG_DEFAULT_DEVICE_TREE="imx53-cx9020"
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_FPGA_ALTERA=y
 CONFIG_FPGA_CYCLON2=y
+CONFIG_DM=y
 CONFIG_DM_MMC=y
+CONFIG_DM_GPIO=y
 CONFIG_FSL_ESDHC=y
 CONFIG_FEC_MXC=y
 CONFIG_MII=y
-- 
2.21.0