[U-Boot] [PATCH v1 4/6] dm: arm: imx: cx9020: migrate to dm_video

[linux-kernel-dev at beckhoff.com]

From: Steffen Dirkwinkel <s.dirkwinkel at beckhoff.com>

Enable DM_VIDEO in config and don't overwrite console so it can be set
from environment

Acked-by: Patrick Bruenn <p.bruenn at beckhoff.com>
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel at beckhoff.com>
---

 board/beckhoff/mx53cx9020/Makefile           |  2 +-
 board/beckhoff/mx53cx9020/mx53cx9020.c       | 11 -----
 board/beckhoff/mx53cx9020/mx53cx9020_video.c | 51 +++++++++-----------
 configs/mx53cx9020_defconfig                 |  5 +-
 include/configs/mx53cx9020.h                 |  6 +--
 5 files changed, 28 insertions(+), 47 deletions(-)

diff --git a/board/beckhoff/mx53cx9020/Makefile b/board/beckhoff/mx53cx9020/Makefile
index 423a5532ca6..7f15fc5746d 100644
--- a/board/beckhoff/mx53cx9020/Makefile
+++ b/board/beckhoff/mx53cx9020/Makefile
@@ -4,4 +4,4 @@
 # Patrick Bruenn <p.bruenn at beckhoff.com>
 
 obj-y               += mx53cx9020.o
-obj-$(CONFIG_VIDEO) += mx53cx9020_video.o
+obj-$(CONFIG_DM_VIDEO) += mx53cx9020_video.o
diff --git a/board/beckhoff/mx53cx9020/mx53cx9020.c b/board/beckhoff/mx53cx9020/mx53cx9020.c
index 79ea4560283..fdef4477d9a 100644
--- a/board/beckhoff/mx53cx9020/mx53cx9020.c
+++ b/board/beckhoff/mx53cx9020/mx53cx9020.c
@@ -23,8 +23,6 @@
 #include <mmc.h>
 #include <fsl_esdhc.h>
 #include <asm/gpio.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
 #include <input.h>
 #include <fs.h>
 #include <dm/platform_data/serial_mxc.h>
@@ -232,15 +230,6 @@ int board_early_init_f(void)
 	return 0;
 }
 
-/*
- * Do not overwrite the console
- * Use always serial for U-Boot console
- */
-int overwrite_console(void)
-{
-	return 1;
-}
-
 int board_init(void)
 {
 	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
diff --git a/board/beckhoff/mx53cx9020/mx53cx9020_video.c b/board/beckhoff/mx53cx9020/mx53cx9020_video.c
index 85f1cdae8af..bf472902562 100644
--- a/board/beckhoff/mx53cx9020/mx53cx9020_video.c
+++ b/board/beckhoff/mx53cx9020/mx53cx9020_video.c
@@ -8,29 +8,34 @@
  */
 
 #include <common.h>
-#include <linux/list.h>
-#include <asm/gpio.h>
 #include <asm/arch/iomux-mx53.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
+#include <asm/gpio.h>
+#include <asm/mach-imx/video.h>
 
 #define CX9020_DVI_PWD	IMX_GPIO_NR(6, 1)
 
-static struct fb_videomode const vga_640x480 = {
-	.name = "VESA_VGA_640x480",
-	.refresh = 60,
-	.xres = 640,
-	.yres = 480,
-	.pixclock = 39721,	/* picosecond (25.175 MHz) */
-	.left_margin = 40,
-	.right_margin = 60,
-	.upper_margin = 10,
-	.lower_margin = 10,
-	.hsync_len = 20,
-	.vsync_len = 10,
-	.sync = 0,
-	.vmode = FB_VMODE_NONINTERLACED
-};
+struct display_info_t const displays[] = {{
+	.bus	= -1,
+	.addr	= 0,
+	.pixfmt	= IPU_PIX_FMT_RGB24,
+	.detect	= NULL,
+	.enable	= NULL,
+	.mode	= {
+		.name           = "DVI",
+		.refresh = 60,
+		.xres = 640,
+		.yres = 480,
+		.pixclock = 39721,	/* picosecond (25.175 MHz) */
+		.left_margin = 40,
+		.right_margin = 60,
+		.upper_margin = 10,
+		.lower_margin = 10,
+		.hsync_len = 20,
+		.vsync_len = 10,
+		.sync = 0,
+		.vmode = FB_VMODE_NONINTERLACED
+} } };
+size_t display_count = ARRAY_SIZE(displays);
 
 void setup_iomux_lcd(void)
 {
@@ -39,11 +44,3 @@ void setup_iomux_lcd(void)
 	gpio_request(CX9020_DVI_PWD, "CX9020_DVI_PWD");
 	gpio_direction_output(CX9020_DVI_PWD, 1);
 }
-
-int board_video_skip(void)
-{
-	const int ret = ipuv3_fb_init(&vga_640x480, 0, IPU_PIX_FMT_RGB24);
-	if (ret)
-		printf("VESA VG 640x480 cannot be configured: %d\n", ret);
-	return ret;
-}
diff --git a/configs/mx53cx9020_defconfig b/configs/mx53cx9020_defconfig
index 93c113aba73..11b414f790e 100644
--- a/configs/mx53cx9020_defconfig
+++ b/configs/mx53cx9020_defconfig
@@ -33,6 +33,5 @@ CONFIG_MII=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX5=y
 CONFIG_MXC_UART=y
-CONFIG_VIDEO=y
-CONFIG_VIDEO_IPUV3=y
-# CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_DM_VIDEO=y
+CONFIG_VIDEO_IPUV3=y
\ No newline at end of file
diff --git a/include/configs/mx53cx9020.h b/include/configs/mx53cx9020.h
index 1e3ea88b77a..66a0f319c45 100644
--- a/include/configs/mx53cx9020.h
+++ b/include/configs/mx53cx9020.h
@@ -160,11 +160,7 @@
 #define CONFIG_SYS_MMC_ENV_DEV 0
 
 /* Framebuffer and LCD */
+#define CONFIG_IMX_VIDEO_SKIP
 #define CONFIG_PREBOOT
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_BMP_16BPP
-#define CONFIG_VIDEO_LOGO
 
 #endif /* __CONFIG_H */
-- 
2.21.0