[U-Boot] [RESEND PATCH v3] sun50i: a64: Add Olimex A64-Teres-I board initial support

Fri Apr 19 06:21:27 UTC 2019

On Fri, Apr 19, 2019 at 1:14 AM Jonas Smedegaard <dr at jones.dk> wrote:
>
> [resent only to list, to avoid blocking due to too many recipients]

Better to CC maintainers at least.

>
> Olimex A64-Teres-I board is a mainboard (the only one so far)
> for Olimex Teres-I DIY laptop kit.
>
> Key features:
> - Allwinner A64 Cortex-A53
> - Mali-400MP2 GPU
> - AXP803 PMIC
> - 2GB DDR3 RAM
> - MicroSD Slot
> - 16GB eMMC Flash
> - eDP LCD display
> - HDMI
> - USB Host
> - Battery management
> - 5V DC power supply
> - Certified Open Source Hardware (OSHW)
>
> Works:
> - i2C
> - MMC/SD
> - PWM backlight
>
> Known broken:
> - USB
>
> Company page: https://linux-sunxi.org/Olimex_Teres-A64
> Community page: https://linux-sunxi.org/Olimex_Teres-A64
> hardware sources:
> https://github.com/OLIMEX/DIY-LAPTOP/tree/master/HARDWARE/A64-TERES/TERES-PCB1-A64-MAIN

We discussed to remove these.

>
> This patch enables support for the A64-Teres-I board to u-boot,
> including enabling screen backlight (lacking from Linux device-tree).
>
> Linux commit details about the sun50i-a64-teres-i.dts sync:
> "arm64: dts: allwinner: a64: Rename uart0_pins_a label to uart0_pb_pins"
> (sha1: d91ebb95b96c8840932dc3a10c9f243712555467)
>
> Cosmetic warnings regarding whitespace and placement of SPDX notice for
> dts file was ignored.
>
> config and .dtsi file are adapted from pinebook files.
>
> Tested-by: Jonas Smedegaard <dr at jones.dk>
> Signed-off-by: Jonas Smedegaard <dr at jones.dk>
> ---
>
>
> Changes for v2:
>   * List Icenowy and Jonas as MAINTAINERS
>   * Add commit hash in linux tree for sun50i-a64-teres-i.dts
>   * Drop superfluous and unsupported Author: tag
>
> Changes for v3:
>   * Use tags sun50i a64 (not sunxi)
>   * List key, working, and known broken features
>   * Reference upstream pages.
>   * Reference linux commit
>
> ---
>  MAINTAINERS                                 |   8 +
>  arch/arm/dts/Makefile                       |   3 +-
>  arch/arm/dts/sun50i-a64-teres-i-u-boot.dtsi |  41 +++
>  arch/arm/dts/sun50i-a64-teres-i.dts         | 270 ++++++++++++++++++++
>  configs/teres_i_defconfig                   |  21 ++
>  5 files changed, 342 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/dts/sun50i-a64-teres-i-u-boot.dtsi
>  create mode 100644 arch/arm/dts/sun50i-a64-teres-i.dts
>  create mode 100644 configs/teres_i_defconfig
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index c77abba1e5..d6ba87a0ba 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -319,6 +319,14 @@ F: arch/arm/include/asm/arch-sunxi/
>  F:     arch/arm/mach-sunxi/
>  F:     board/sunxi/
>
> +ARM SUNXI OLIMEX TERES-I
> +M:     Jonas Smedegaard <dr at jones.dk>
> +M:     Icenowy Zheng <icenowy at aosc.io>
> +S:     Maintained
> +T:     git https://salsa.debian.org/js/u-boot

Same here

and you have to add this entry in board/sunxi/MAINTAINERS

> +F:     arch/arm/dts/sun50i-a64-teres-i*
> +F:     configs/teres_i_defconfig
> +
>  ARM TEGRA
>  M:     Tom Warren <twarren at nvidia.com>
>  S:     Maintained
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 0aee8dfde0..eabe9e1ae3 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -483,7 +483,8 @@ dtb-$(CONFIG_MACH_SUN50I) += \
>         sun50i-a64-pine64-plus.dtb \
>         sun50i-a64-pine64.dtb \
>         sun50i-a64-pinebook.dtb \
> -       sun50i-a64-sopine-baseboard.dtb
> +       sun50i-a64-sopine-baseboard.dtb \
> +       sun50i-a64-teres-i.dtb
>  dtb-$(CONFIG_MACH_SUN9I) += \
>         sun9i-a80-optimus.dtb \
>         sun9i-a80-cubieboard4.dtb \
> diff --git a/arch/arm/dts/sun50i-a64-teres-i-u-boot.dtsi b/arch/arm/dts/sun50i-a64-teres-i-u-boot.dtsi
> new file mode 100644
> index 0000000000..1a64b7d09c
> --- /dev/null
> +++ b/arch/arm/dts/sun50i-a64-teres-i-u-boot.dtsi
> @@ -0,0 +1,41 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2019 Vasily Khoruzhick <anarsoul at gmail.com>
> + *
> + */
> +
> +#include "sunxi-u-boot.dtsi"
> +
> +/ {
> +       vdd_bl: regulator at 0 {
> +               compatible = "regulator-fixed";
> +               regulator-name = "bl-3v3";
> +               regulator-min-microvolt = <3300000>;
> +               regulator-max-microvolt = <3300000>;
> +               gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
> +               enable-active-high;
> +       };
> +
> +       backlight: backlight {
> +               compatible = "pwm-backlight";
> +               pwms = <&pwm 0 50000 0>;
> +               brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>;
> +               default-brightness-level = <2>;
> +               enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
> +               power-supply = <&vdd_bl>;
> +       };
> +};
> +
> +/* The ANX6345 eDP-bridge is on i2c */
> +&i2c0 {
> +       anx6345: edp-bridge at 38 {
> +               compatible = "analogix,anx6345";
> +               reg = <0x38>;
> +               reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
> +               status = "okay";
> +       };
> +};
> +
> +&pwm {
> +       status = "okay";
> +};
> diff --git a/arch/arm/dts/sun50i-a64-teres-i.dts b/arch/arm/dts/sun50i-a64-teres-i.dts
> new file mode 100644
> index 0000000000..c455b24dd0
> --- /dev/null
> +++ b/arch/arm/dts/sun50i-a64-teres-i.dts
> @@ -0,0 +1,270 @@
> +/*
> + * Copyright (C) Harald Geyer <harald at ccbib.org>
> + * based on sun50i-a64-olinuxino.dts by Jagan Teki <jteki at openedev.com>
> + *
> + * SPDX-License-Identifier: (GPL-2.0 OR MIT)
> + */
> +
> +/dts-v1/;
> +
> +#include "sun50i-a64.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/pwm/pwm.h>
> +
> +/ {
> +       model = "Olimex A64 Teres-I";
> +       compatible = "olimex,a64-teres-i", "allwinner,sun50i-a64";
> +
> +       aliases {
> +               serial0 = &uart0;
> +       };
> +
> +       chosen {
> +               stdout-path = "serial0:115200n8";
> +
> +               framebuffer-lcd {
> +                       eDP25-supply = <&reg_dldo2>;
> +                       eDP12-supply = <&reg_dldo3>;
> +               };
> +       };
> +
> +       gpio-keys {
> +               compatible = "gpio-keys";
> +
> +               lid-switch {
> +                       label = "Lid Switch";
> +                       gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
> +                       linux,input-type = <EV_SW>;
> +                       linux,code = <SW_LID>;
> +                       wakeup-source;
> +               };
> +       };
> +
> +       leds {
> +               compatible = "gpio-leds";
> +
> +               capslock {
> +                       label = "teres-i:green:capslock";
> +                       gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */
> +               };
> +
> +               numlock {
> +                       label = "teres-i:green:numlock";
> +                       gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */
> +               };
> +       };
> +
> +       reg_usb1_vbus: usb1-vbus {
> +               compatible = "regulator-fixed";
> +               regulator-name = "usb1-vbus";
> +               regulator-min-microvolt = <5000000>;
> +               regulator-max-microvolt = <5000000>;
> +               enable-active-high;
> +               gpio = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
> +               status = "okay";
> +       };
> +
> +       wifi_pwrseq: wifi_pwrseq {
> +               compatible = "mmc-pwrseq-simple";
> +               reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
> +       };
> +};
> +
> +&ehci1 {
> +       status = "okay";
> +};
> +
> +
> +/* The ANX6345 eDP-bridge is on i2c0. There is no linux (mainline)
> + * driver for this chip at the moment, the bootloader initializes it.
> + * However it can be accessed with the i2c-dev driver from user space.
> + */
> +&i2c0 {
> +       clock-frequency = <100000>;
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&i2c0_pins>;
> +       status = "okay";
> +};
> +
> +&mmc0 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&mmc0_pins>;
> +       vmmc-supply = <&reg_dcdc1>;
> +       cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
> +       disable-wp;
> +       bus-width = <4>;
> +       status = "okay";
> +};
> +
> +&mmc1 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&mmc1_pins>;
> +       vmmc-supply = <&reg_aldo2>;
> +       vqmmc-supply = <&reg_dldo4>;
> +       mmc-pwrseq = <&wifi_pwrseq>;
> +       bus-width = <4>;
> +       non-removable;
> +       status = "okay";
> +
> +       rtl8723bs: wifi at 1 {
> +               reg = <1>;
> +               interrupt-parent = <&r_pio>;
> +               interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
> +               interrupt-names = "host-wake";
> +       };
> +};
> +
> +&mmc2 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&mmc2_pins>;
> +       vmmc-supply = <&reg_dcdc1>;
> +       vqmmc-supply = <&reg_dcdc1>;
> +       bus-width = <8>;
> +       non-removable;
> +       cap-mmc-hw-reset;
> +       status = "okay";
> +};
> +
> +&ohci1 {
> +       status = "okay";
> +};
> +
> +&r_rsb {
> +       status = "okay";
> +
> +       axp803: pmic at 3a3 {
> +               compatible = "x-powers,axp803";
> +               reg = <0x3a3>;
> +               interrupt-parent = <&r_intc>;
> +               interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> +               wakeup-source;
> +       };
> +};
> +
> +#include "axp803.dtsi"
> +
> +&reg_aldo1 {
> +       regulator-always-on;
> +       regulator-min-microvolt = <2800000>;
> +       regulator-max-microvolt = <2800000>;
> +       regulator-name = "vcc-pe";
> +};
> +
> +&reg_aldo2 {
> +       regulator-always-on;
> +       regulator-min-microvolt = <3300000>;
> +       regulator-max-microvolt = <3300000>;
> +       regulator-name = "vcc-pl";
> +};
> +
> +&reg_aldo3 {
> +       regulator-always-on;
> +       regulator-min-microvolt = <3000000>;
> +       regulator-max-microvolt = <3000000>;
> +       regulator-name = "vcc-pll-avcc";
> +};
> +
> +&reg_dcdc1 {
> +       regulator-always-on;
> +       regulator-min-microvolt = <3300000>;
> +       regulator-max-microvolt = <3300000>;
> +       regulator-name = "vcc-3v3";
> +};
> +
> +&reg_dcdc2 {
> +       regulator-always-on;
> +       regulator-min-microvolt = <1040000>;
> +       regulator-max-microvolt = <1300000>;
> +       regulator-name = "vdd-cpux";
> +};
> +
> +/* DCDC3 is polyphased with DCDC2 */
> +
> +&reg_dcdc5 {
> +       regulator-always-on;
> +       regulator-min-microvolt = <1500000>;
> +       regulator-max-microvolt = <1500000>;
> +       regulator-name = "vcc-ddr3";
> +};
> +
> +&reg_dcdc6 {
> +       regulator-always-on;
> +       regulator-min-microvolt = <1100000>;
> +       regulator-max-microvolt = <1100000>;
> +       regulator-name = "vdd-sys";
> +};
> +
> +&reg_dldo1 {
> +       regulator-min-microvolt = <3300000>;
> +       regulator-max-microvolt = <3300000>;
> +       regulator-name = "vcc-hdmi";
> +};
> +
> +&reg_dldo2 {
> +       regulator-min-microvolt = <2500000>;
> +       regulator-max-microvolt = <2500000>;
> +       regulator-name = "vcc-pd";
> +};
> +
> +&reg_dldo3 {
> +       regulator-min-microvolt = <1200000>;
> +       regulator-max-microvolt = <1200000>;
> +       regulator-name = "vdd-edp";
> +};
> +
> +&reg_dldo4 {
> +       regulator-min-microvolt = <3300000>;
> +       regulator-max-microvolt = <3300000>;
> +       regulator-name = "vcc-wifi-io";
> +};
> +
> +&reg_eldo1 {
> +       regulator-min-microvolt = <1800000>;
> +       regulator-max-microvolt = <1800000>;
> +       regulator-name = "cpvdd";
> +};
> +
> +&reg_eldo2 {
> +       regulator-min-microvolt = <1800000>;
> +       regulator-max-microvolt = <1800000>;
> +       regulator-name = "vcc-dvdd-csi";
> +};
> +
> +&reg_fldo1 {
> +       regulator-min-microvolt = <1200000>;
> +       regulator-max-microvolt = <1200000>;
> +       regulator-name = "vcc-1v2-hsic";
> +};
> +
> +/*
> + * The A64 chip cannot work without this regulator off, although
> + * it seems to be only driving the AR100 core.
> + * Maybe we don't still know well about CPUs domain.
> + */
> +&reg_fldo2 {
> +       regulator-always-on;
> +       regulator-min-microvolt = <1100000>;
> +       regulator-max-microvolt = <1100000>;
> +       regulator-name = "vdd-cpus";
> +};
> +
> +&reg_rtc_ldo {
> +       regulator-name = "vcc-rtc";
> +};
> +
> +&simplefb_hdmi {
> +       vcc-hdmi-supply = <&reg_dldo1>;
> +};
> +
> +&uart0 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&uart0_pb_pins>;
> +       status = "okay";
> +};
> +
> +&usbphy {
> +       usb1_vbus-supply = <&reg_usb1_vbus>;
> +       status = "okay";
> +};
> diff --git a/configs/teres_i_defconfig b/configs/teres_i_defconfig
> new file mode 100644
> index 0000000000..939dc24408
> --- /dev/null
> +++ b/configs/teres_i_defconfig
> @@ -0,0 +1,21 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_SUNXI=y
> +CONFIG_SPL=y
> +CONFIG_MACH_SUN50I=y
> +CONFIG_DRAM_CLK=552
> +CONFIG_DRAM_ZQ=3881949
> +CONFIG_MMC_SUNXI_SLOT_EXTRA=2
> +CONFIG_I2C0_ENABLE=y
> +# CONFIG_CMD_FLASH is not set
> +# CONFIG_SPL_DOS_PARTITION is not set
> +# CONFIG_SPL_EFI_PARTITION is not set
> +CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-teres-i"
> +CONFIG_DM_REGULATOR=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_DM_PWM=y
> +CONFIG_PWM_SUNXI=y
> +CONFIG_USB_EHCI_HCD=y

Enable CONFIG_USB_OHCI_HCD since you have ohci node. I this this would
fix your usb issue.