[U-Boot] [PATCH 1/6] stm32mp1: clk: use the correct identifier for ethck

[Patrick DELAUNAY]

Hi Christophe,

> 
> From: Patrick Delaunay <patrick.delaunay at st.com>
> 
> ETHCK_K is the identifier the kernel clock for ETH in kernel binding, selected by
> ETHKSELR / gated by ETHCKEN = BIT(7).
> U-Boot driver need to use the same identifier, so change ETHCK to ETHCK_K.
> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com>
> Signed-off-by: Christophe Roullier <christophe.roullier at st.com>
> ---
> 
>  drivers/clk/clk_stm32mp1.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/clk_stm32mp1.c b/drivers/clk/clk_stm32mp1.c index
> aebc6f0..d70e039 100644
> --- a/drivers/clk/clk_stm32mp1.c
> +++ b/drivers/clk/clk_stm32mp1.c
> @@ -553,7 +553,7 @@ static const struct stm32mp1_clk_gate
> stm32mp1_clk_gate[] = {
> 
>  	STM32MP1_CLK_SET_CLR(RCC_MP_AHB5ENSETR, 0, GPIOZ,
> _UNKNOWN_SEL),
> 
> -	STM32MP1_CLK_SET_CLR(RCC_MP_AHB6ENSETR, 7, ETHCK,
> _ETH_SEL),
> +	STM32MP1_CLK_SET_CLR(RCC_MP_AHB6ENSETR, 7, ETHCK_K,
> _ETH_SEL),
>  	STM32MP1_CLK_SET_CLR(RCC_MP_AHB6ENSETR, 8, ETHTX,
> _UNKNOWN_SEL),
>  	STM32MP1_CLK_SET_CLR(RCC_MP_AHB6ENSETR, 9, ETHRX,
> _UNKNOWN_SEL),
>  	STM32MP1_CLK_SET_CLR_F(RCC_MP_AHB6ENSETR, 10, ETHMAC,
> _ACLK),
> --
> 2.7.4

For stm32mp1 boards EV1 and DK2
Test done with master (SHA1 = 75ce8c938d39bd22460be66e6bf318bd2410c17b)

Tested-by: Patrick Delaunay <patrick.delaunay at st.com>

Regards
Patrick