[U-Boot] [PATCH v2] pinctrl: imx: Define imx6_pinctrl_soc_info in .data section

[Lukasz Majewski]

This commit is necessary to be able to re-use the pinctrl code in early
SPL to properly configure pins.

The problem is that those "static" structures (without explicit
initialization) are placed in the SDRAM area, which corresponds to
u-boot proper (not even SPL).
Hence, when one wants to configure pins before relocation via DTS/DM,
the board hangs (imx6q SoC powered one) as only OCRAM area is available
(0x009xxxxx).

This commit prevents from this issue by moving the imx6_pinctrl_soc_info
structure to data section (from BSS).

Signed-off-by: Lukasz Majewski <lukma at denx.de>

---

Changes in v2:
- Use __section(".data") instead of rewritting the code to use calloc()
  (less intrusive commit)

 drivers/pinctrl/nxp/pinctrl-imx6.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/nxp/pinctrl-imx6.c b/drivers/pinctrl/nxp/pinctrl-imx6.c
index d7c95bb738..0c1e7a9c05 100644
--- a/drivers/pinctrl/nxp/pinctrl-imx6.c
+++ b/drivers/pinctrl/nxp/pinctrl-imx6.c
@@ -10,7 +10,7 @@
 
 #include "pinctrl-imx.h"
 
-static struct imx_pinctrl_soc_info imx6_pinctrl_soc_info;
+static struct imx_pinctrl_soc_info imx6_pinctrl_soc_info __section(".data");
 
 /* FIXME Before reloaction, BSS is overlapped with DT area */
 static struct imx_pinctrl_soc_info imx6ul_pinctrl_soc_info = {
-- 
2.11.0