[U-Boot] [PATCH 1/3] net: mscc: ocelot: Update network driver for pcb120
Horatiu Vultur
horatiu.vultur at microchip.com
Wed Apr 24 09:27:57 UTC 2019
Update Ocelot network driver to have support also for pcb120.
Signed-off-by: Horatiu Vultur <horatiu.vultur at microchip.com>
---
.../include/mach/ocelot/ocelot_devcpu_gcb.h | 1 +
drivers/net/mscc_eswitch/Makefile | 2 +-
drivers/net/mscc_eswitch/ocelot_switch.c | 434 ++++++++++++++++-----
3 files changed, 338 insertions(+), 99 deletions(-)
diff --git a/arch/mips/mach-mscc/include/mach/ocelot/ocelot_devcpu_gcb.h b/arch/mips/mach-mscc/include/mach/ocelot/ocelot_devcpu_gcb.h
index d3a7641..b2a4203 100644
--- a/arch/mips/mach-mscc/include/mach/ocelot/ocelot_devcpu_gcb.h
+++ b/arch/mips/mach-mscc/include/mach/ocelot/ocelot_devcpu_gcb.h
@@ -20,4 +20,5 @@
#define GPIO_ALT(x) (0x54 + 4 * (x))
+#define PERF_PHY_CFG 0xf0
#endif
diff --git a/drivers/net/mscc_eswitch/Makefile b/drivers/net/mscc_eswitch/Makefile
index 6aa59ef..9c208d1 100644
--- a/drivers/net/mscc_eswitch/Makefile
+++ b/drivers/net/mscc_eswitch/Makefile
@@ -1,5 +1,5 @@
-obj-$(CONFIG_MSCC_OCELOT_SWITCH) += ocelot_switch.o mscc_miim.o mscc_xfer.o mscc_mac_table.o
+obj-$(CONFIG_MSCC_OCELOT_SWITCH) += ocelot_switch.o mscc_xfer.o mscc_mac_table.o
obj-$(CONFIG_MSCC_LUTON_SWITCH) += luton_switch.o mscc_miim.o mscc_xfer.o mscc_mac_table.o
obj-$(CONFIG_MSCC_JR2_SWITCH) += jr2_switch.o mscc_xfer.o
obj-$(CONFIG_MSCC_SERVALT_SWITCH) += servalt_switch.o mscc_xfer.o
diff --git a/drivers/net/mscc_eswitch/ocelot_switch.c b/drivers/net/mscc_eswitch/ocelot_switch.c
index 815c2da..5c7e696 100644
--- a/drivers/net/mscc_eswitch/ocelot_switch.c
+++ b/drivers/net/mscc_eswitch/ocelot_switch.c
@@ -15,7 +15,6 @@
#include <net.h>
#include <wait_bit.h>
-#include "mscc_miim.h"
#include "mscc_xfer.h"
#include "mscc_mac_table.h"
@@ -26,6 +25,20 @@
#define PHY_STAT 0x4
#define PHY_STAT_SUPERVISOR_COMPLETE BIT(0)
+#define GCB_MIIM_MII_STATUS 0x0
+#define GCB_MIIM_STAT_BUSY BIT(3)
+#define GCB_MIIM_MII_CMD 0x8
+#define GCB_MIIM_MII_CMD_SCAN BIT(0)
+#define GCB_MIIM_MII_CMD_OPR_WRITE BIT(1)
+#define GCB_MIIM_MII_CMD_OPR_READ BIT(2)
+#define GCB_MIIM_MII_CMD_SINGLE_SCAN BIT(3)
+#define GCB_MIIM_MII_CMD_WRDATA(x) ((x) << 4)
+#define GCB_MIIM_MII_CMD_REGAD(x) ((x) << 20)
+#define GCB_MIIM_MII_CMD_PHYAD(x) ((x) << 25)
+#define GCB_MIIM_MII_CMD_VLD BIT(31)
+#define GCB_MIIM_DATA 0xC
+#define GCB_MIIM_DATA_ERROR (0x3 << 16)
+
#define ANA_PORT_VLAN_CFG(x) (0x7000 + 0x100 * (x))
#define ANA_PORT_VLAN_CFG_AWARE_ENA BIT(20)
#define ANA_PORT_VLAN_CFG_POP_CNT(x) ((x) << 18)
@@ -33,6 +46,41 @@
#define ANA_PORT_PORT_CFG_RECV_ENA BIT(6)
#define ANA_PGID(x) (0x8c00 + 4 * (x))
+#define HSIO_ANA_SERDES1G_DES_CFG 0x4c
+#define HSIO_ANA_SERDES1G_DES_CFG_BW_HYST(x) ((x) << 1)
+#define HSIO_ANA_SERDES1G_DES_CFG_BW_ANA(x) ((x) << 5)
+#define HSIO_ANA_SERDES1G_DES_CFG_MBTR_CTRL(x) ((x) << 8)
+#define HSIO_ANA_SERDES1G_DES_CFG_PHS_CTRL(x) ((x) << 13)
+#define HSIO_ANA_SERDES1G_IB_CFG 0x50
+#define HSIO_ANA_SERDES1G_IB_CFG_RESISTOR_CTRL(x) (x)
+#define HSIO_ANA_SERDES1G_IB_CFG_EQ_GAIN(x) ((x) << 6)
+#define HSIO_ANA_SERDES1G_IB_CFG_ENA_OFFSET_COMP BIT(9)
+#define HSIO_ANA_SERDES1G_IB_CFG_ENA_DETLEV BIT(11)
+#define HSIO_ANA_SERDES1G_IB_CFG_ENA_CMV_TERM BIT(13)
+#define HSIO_ANA_SERDES1G_IB_CFG_ACJTAG_HYST(x) ((x) << 24)
+#define HSIO_ANA_SERDES1G_OB_CFG 0x54
+#define HSIO_ANA_SERDES1G_OB_CFG_RESISTOR_CTRL(x) (x)
+#define HSIO_ANA_SERDES1G_OB_CFG_VCM_CTRL(x) ((x) << 4)
+#define HSIO_ANA_SERDES1G_OB_CFG_CMM_BIAS_CTRL(x) ((x) << 10)
+#define HSIO_ANA_SERDES1G_OB_CFG_AMP_CTRL(x) ((x) << 13)
+#define HSIO_ANA_SERDES1G_OB_CFG_SLP(x) ((x) << 17)
+#define HSIO_ANA_SERDES1G_SER_CFG 0x58
+#define HSIO_ANA_SERDES1G_COMMON_CFG 0x5c
+#define HSIO_ANA_SERDES1G_COMMON_CFG_IF_MODE BIT(0)
+#define HSIO_ANA_SERDES1G_COMMON_CFG_ENA_LANE BIT(18)
+#define HSIO_ANA_SERDES1G_COMMON_CFG_SYS_RST BIT(31)
+#define HSIO_ANA_SERDES1G_PLL_CFG 0x60
+#define HSIO_ANA_SERDES1G_PLL_CFG_FSM_ENA BIT(7)
+#define HSIO_ANA_SERDES1G_PLL_CFG_FSM_CTRL_DATA(x) ((x) << 8)
+#define HSIO_ANA_SERDES1G_PLL_CFG_ENA_RC_DIV2 BIT(21)
+#define HSIO_DIG_SERDES1G_DFT_CFG0 0x68
+#define HSIO_DIG_SERDES1G_MISC_CFG 0x7c
+#define HSIO_DIG_SERDES1G_MISC_CFG_LANE_RST BIT(0)
+#define HSIO_MCB_SERDES1G_CFG 0x88
+#define HSIO_MCB_SERDES1G_CFG_WR_ONE_SHOT BIT(31)
+#define HSIO_MCB_SERDES1G_CFG_ADDR(x) (x)
+#define HSIO_HW_CFGSTAT_HW_CFG 0x10c
+
#define SYS_FRM_AGING 0x574
#define SYS_FRM_AGING_ENA BIT(20)
@@ -83,49 +131,58 @@
#define QS_INJ_GRP_CFG_BYTE_SWAP BIT(0)
#define IFH_INJ_BYPASS BIT(31)
-#define IFH_TAG_TYPE_C 0
-#define MAC_VID 1
+#define IFH_TAG_TYPE_C 0
+#define MAC_VID 1
#define CPU_PORT 11
-#define INTERNAL_PORT_MSK 0xF
+#define INTERNAL_PORT_MSK 0x2FF
#define IFH_LEN 4
#define ETH_ALEN 6
-#define PGID_BROADCAST 13
-#define PGID_UNICAST 14
-#define PGID_SRC 80
+#define PGID_BROADCAST 13
+#define PGID_UNICAST 14
+#define PGID_SRC 80
-enum ocelot_target {
- ANA,
- QS,
- QSYS,
+static const char * const regs_names[] = {
+ "port0", "port1", "port2", "port3", "port4", "port5", "port6", "port7",
+ "port8", "port9", "port10", "sys", "rew", "qs", "hsio", "qsys", "ana",
+};
+
+#define REGS_NAMES_COUNT ARRAY_SIZE(regs_names) + 1
+#define MAX_PORT 11
+
+enum ocelot_ctrl_regs {
+ SYS = MAX_PORT,
REW,
- SYS,
+ QS,
HSIO,
- PORT0,
- PORT1,
- PORT2,
- PORT3,
- TARGET_MAX,
+ QSYS,
+ ANA,
};
-#define MAX_PORT (PORT3 - PORT0)
+#define OCELOT_MIIM_BUS_COUNT 2
-enum ocelot_mdio_target {
- MIIM,
- PHY,
- TARGET_MDIO_MAX,
+struct ocelot_phy_port_t {
+ size_t phy_addr;
+ struct mii_dev *bus;
+ u8 serdes_index;
+ u8 phy_mode;
};
-enum ocelot_phy_id {
- INTERNAL,
- EXTERNAL,
- NUM_PHY,
+struct ocelot_private {
+ void __iomem *regs[REGS_NAMES_COUNT];
+ struct mii_dev *bus[OCELOT_MIIM_BUS_COUNT];
+ struct ocelot_phy_port_t ports[MAX_PORT];
};
-struct ocelot_private {
- void __iomem *regs[TARGET_MAX];
- struct mii_dev *bus[NUM_PHY];
+struct mscc_miim_dev {
+ void __iomem *regs;
+ phys_addr_t miim_base;
+ unsigned long miim_size;
+ struct mii_dev *bus;
};
+static struct mscc_miim_dev miim[OCELOT_MIIM_BUS_COUNT];
+static int miim_count = -1;
+
static const unsigned long ocelot_regs_qs[] = {
[MSCC_QS_XTR_RD] = 0x8,
[MSCC_QS_XTR_FLUSH] = 0x18,
@@ -140,65 +197,95 @@ static const unsigned long ocelot_regs_ana_table[] = {
[MSCC_ANA_TABLES_MACACCESS] = 0x8b3c,
};
-static struct mscc_miim_dev miim[NUM_PHY];
-
static void mscc_phy_reset(void)
{
- writel(0, miim[INTERNAL].phy_regs + PHY_CFG);
+ writel(0, BASE_DEVCPU_GCB + PERF_PHY_CFG + PHY_CFG);
writel(PHY_CFG_RST | PHY_CFG_COMMON_RST
- | PHY_CFG_ENA, miim[INTERNAL].phy_regs + PHY_CFG);
- if (wait_for_bit_le32(miim[INTERNAL].phy_regs + PHY_STAT,
- PHY_STAT_SUPERVISOR_COMPLETE,
+ | PHY_CFG_ENA, BASE_DEVCPU_GCB + PERF_PHY_CFG + PHY_CFG);
+ if (wait_for_bit_le32((const void *)(BASE_DEVCPU_GCB + PERF_PHY_CFG) +
+ PHY_STAT, PHY_STAT_SUPERVISOR_COMPLETE,
true, 2000, false)) {
pr_err("Timeout in phy reset\n");
}
}
-/* For now only setup the internal mdio bus */
-static struct mii_dev *ocelot_mdiobus_init(struct udevice *dev)
+static int mscc_miim_wait_ready(struct mscc_miim_dev *miim)
+{
+ return wait_for_bit_le32(miim->regs + GCB_MIIM_MII_STATUS,
+ GCB_MIIM_STAT_BUSY, false, 250, false);
+}
+
+static int mscc_miim_read(struct mii_dev *bus, int addr, int devad, int reg)
+{
+ struct mscc_miim_dev *miim = (struct mscc_miim_dev *)bus->priv;
+ u32 val;
+ int ret;
+
+ ret = mscc_miim_wait_ready(miim);
+ if (ret)
+ goto out;
+
+ writel(GCB_MIIM_MII_CMD_VLD | GCB_MIIM_MII_CMD_PHYAD(addr) |
+ GCB_MIIM_MII_CMD_REGAD(reg) | GCB_MIIM_MII_CMD_OPR_READ,
+ miim->regs + GCB_MIIM_MII_CMD);
+
+ ret = mscc_miim_wait_ready(miim);
+ if (ret)
+ goto out;
+
+ val = readl(miim->regs + GCB_MIIM_DATA);
+ if (val & GCB_MIIM_DATA_ERROR) {
+ ret = -EIO;
+ goto out;
+ }
+
+ ret = val & 0xFFFF;
+ out:
+ return ret;
+}
+
+static int mscc_miim_write(struct mii_dev *bus, int addr, int devad, int reg,
+ u16 val)
+{
+ struct mscc_miim_dev *miim = (struct mscc_miim_dev *)bus->priv;
+ int ret;
+
+ ret = mscc_miim_wait_ready(miim);
+ if (ret < 0)
+ goto out;
+
+ writel(GCB_MIIM_MII_CMD_VLD | GCB_MIIM_MII_CMD_PHYAD(addr) |
+ GCB_MIIM_MII_CMD_REGAD(reg) | GCB_MIIM_MII_CMD_WRDATA(val) |
+ GCB_MIIM_MII_CMD_OPR_WRITE, miim->regs + GCB_MIIM_MII_CMD);
+ out:
+ return ret;
+}
+
+static struct mii_dev *ocelot_mdiobus_init(phys_addr_t miim_base,
+ unsigned long miim_size)
{
- unsigned long phy_size[TARGET_MAX];
- phys_addr_t phy_base[TARGET_MAX];
- struct ofnode_phandle_args phandle;
- ofnode eth_node, node, mdio_node;
- struct resource res;
struct mii_dev *bus;
- fdt32_t faddr;
- int i;
bus = mdio_alloc();
if (!bus)
return NULL;
- /* gathered only the first mdio bus */
- eth_node = dev_read_first_subnode(dev);
- node = ofnode_first_subnode(eth_node);
- ofnode_parse_phandle_with_args(node, "phy-handle", NULL, 0, 0,
- &phandle);
- mdio_node = ofnode_get_parent(phandle.node);
-
- for (i = 0; i < TARGET_MDIO_MAX; i++) {
- if (ofnode_read_resource(mdio_node, i, &res)) {
- pr_err("%s: get OF resource failed\n", __func__);
- return NULL;
- }
- faddr = cpu_to_fdt32(res.start);
- phy_base[i] = ofnode_translate_address(mdio_node, &faddr);
- phy_size[i] = res.end - res.start;
- }
+ ++miim_count;
+ sprintf(bus->name, "miim-bus%d", miim_count);
- strcpy(bus->name, "miim-internal");
- miim[INTERNAL].phy_regs = ioremap(phy_base[PHY], phy_size[PHY]);
- miim[INTERNAL].regs = ioremap(phy_base[MIIM], phy_size[MIIM]);
- bus->priv = &miim[INTERNAL];
+ miim[miim_count].regs = ioremap(miim_base, miim_size);
+ miim[miim_count].miim_base = miim_base;
+ miim[miim_count].miim_size = miim_size;
+ bus->priv = &miim[miim_count];
bus->read = mscc_miim_read;
bus->write = mscc_miim_write;
if (mdio_register(bus))
return NULL;
- else
- return bus;
+
+ miim[miim_count].bus = bus;
+ return bus;
}
__weak void mscc_switch_reset(void)
@@ -291,13 +378,87 @@ static void ocelot_port_init(struct ocelot_private *priv, int port)
/* Make VLAN aware for CPU traffic */
writel(ANA_PORT_VLAN_CFG_AWARE_ENA | ANA_PORT_VLAN_CFG_POP_CNT(1) |
- MAC_VID, priv->regs[ANA] + ANA_PORT_VLAN_CFG(port - PORT0));
+ MAC_VID, priv->regs[ANA] + ANA_PORT_VLAN_CFG(port));
/* Enable the port in the core */
- setbits_le32(priv->regs[QSYS] + QSYS_SWITCH_PORT_MODE(port - PORT0),
+ setbits_le32(priv->regs[QSYS] + QSYS_SWITCH_PORT_MODE(port),
QSYS_SWITCH_PORT_MODE_PORT_ENA);
}
+static void serdes1g_write(void __iomem *base, u32 addr)
+{
+ u32 data;
+
+ writel(HSIO_MCB_SERDES1G_CFG_WR_ONE_SHOT |
+ HSIO_MCB_SERDES1G_CFG_ADDR(addr),
+ base + HSIO_MCB_SERDES1G_CFG);
+
+ do {
+ data = readl(base + HSIO_MCB_SERDES1G_CFG);
+ } while (data & HSIO_MCB_SERDES1G_CFG_WR_ONE_SHOT);
+}
+
+static void serdes1g_setup(void __iomem *base, uint32_t addr,
+ phy_interface_t interface)
+{
+ writel(0x34, base + HSIO_HW_CFGSTAT_HW_CFG);
+
+ writel(0x0, base + HSIO_ANA_SERDES1G_SER_CFG);
+ writel(0x0, base + HSIO_DIG_SERDES1G_DFT_CFG0);
+ writel(HSIO_ANA_SERDES1G_IB_CFG_RESISTOR_CTRL(11) |
+ HSIO_ANA_SERDES1G_IB_CFG_EQ_GAIN(0) |
+ HSIO_ANA_SERDES1G_IB_CFG_ENA_OFFSET_COMP |
+ HSIO_ANA_SERDES1G_IB_CFG_ENA_CMV_TERM |
+ HSIO_ANA_SERDES1G_IB_CFG_ACJTAG_HYST(1),
+ base + HSIO_ANA_SERDES1G_IB_CFG);
+ writel(HSIO_ANA_SERDES1G_DES_CFG_BW_HYST(7) |
+ HSIO_ANA_SERDES1G_DES_CFG_BW_ANA(6) |
+ HSIO_ANA_SERDES1G_DES_CFG_MBTR_CTRL(2) |
+ HSIO_ANA_SERDES1G_DES_CFG_PHS_CTRL(6),
+ base + HSIO_ANA_SERDES1G_DES_CFG);
+ writel(HSIO_ANA_SERDES1G_OB_CFG_RESISTOR_CTRL(1) |
+ HSIO_ANA_SERDES1G_OB_CFG_VCM_CTRL(4) |
+ HSIO_ANA_SERDES1G_OB_CFG_CMM_BIAS_CTRL(2) |
+ HSIO_ANA_SERDES1G_OB_CFG_AMP_CTRL(12) |
+ HSIO_ANA_SERDES1G_OB_CFG_SLP(3),
+ base + HSIO_ANA_SERDES1G_OB_CFG);
+ writel(HSIO_ANA_SERDES1G_COMMON_CFG_IF_MODE |
+ HSIO_ANA_SERDES1G_COMMON_CFG_ENA_LANE,
+ base + HSIO_ANA_SERDES1G_COMMON_CFG);
+ writel(HSIO_ANA_SERDES1G_PLL_CFG_FSM_ENA |
+ HSIO_ANA_SERDES1G_PLL_CFG_FSM_CTRL_DATA(200) |
+ HSIO_ANA_SERDES1G_PLL_CFG_ENA_RC_DIV2,
+ base + HSIO_ANA_SERDES1G_PLL_CFG);
+ writel(HSIO_DIG_SERDES1G_MISC_CFG_LANE_RST,
+ base + HSIO_DIG_SERDES1G_MISC_CFG);
+
+ serdes1g_write(base, addr);
+
+ writel(HSIO_ANA_SERDES1G_COMMON_CFG_IF_MODE |
+ HSIO_ANA_SERDES1G_COMMON_CFG_ENA_LANE |
+ HSIO_ANA_SERDES1G_COMMON_CFG_SYS_RST,
+ base + HSIO_ANA_SERDES1G_COMMON_CFG);
+ serdes1g_write(base, addr);
+
+ writel(0x0, base + HSIO_DIG_SERDES1G_MISC_CFG);
+ serdes1g_write(base, addr);
+}
+
+static void serdes_setup(struct ocelot_private *priv)
+{
+ size_t mask;
+ int i = 0;
+
+ for (i = 0; i < MAX_PORT; ++i) {
+ if (!priv->ports[i].bus || priv->ports[i].serdes_index == 0xff)
+ continue;
+
+ mask = BIT(priv->ports[i].serdes_index);
+ serdes1g_setup(priv->regs[HSIO], mask,
+ priv->ports[i].phy_mode);
+ }
+}
+
static int ocelot_switch_init(struct ocelot_private *priv)
{
/* Reset switch & memories */
@@ -315,6 +476,7 @@ static int ocelot_switch_init(struct ocelot_private *priv)
setbits_le32(priv->regs[SYS] + SYS_SYSTEM_RST_CFG,
SYS_SYSTEM_RST_CORE_ENA);
+ serdes_setup(priv);
return 0;
}
@@ -331,7 +493,7 @@ static int ocelot_initialize(struct ocelot_private *priv)
* Put fron ports in "port isolation modes" - i.e. they cant send
* to other ports - via the PGID sorce masks.
*/
- for (i = 0; i <= MAX_PORT; i++)
+ for (i = 0; i < MAX_PORT; i++)
writel(0, priv->regs[ANA] + ANA_PGID(PGID_SRC + i));
/* Flush queues */
@@ -341,7 +503,7 @@ static int ocelot_initialize(struct ocelot_private *priv)
writel(SYS_FRM_AGING_ENA | (20000000 / 65),
priv->regs[SYS] + SYS_FRM_AGING);
- for (i = PORT0; i <= PORT3; i++)
+ for (i = 0; i < MAX_PORT; i++)
ocelot_port_init(priv, i);
ocelot_cpu_capture_setup(priv);
@@ -433,43 +595,119 @@ static int ocelot_recv(struct udevice *dev, int flags, uchar **packetp)
return byte_cnt;
}
+static struct mii_dev *get_mdiobus(phys_addr_t base, unsigned long size)
+{
+ int i = 0;
+
+ for (i = 0; i < OCELOT_MIIM_BUS_COUNT; ++i)
+ if (miim[i].miim_base == base && miim[i].miim_size == size)
+ return miim[i].bus;
+
+ return NULL;
+}
+
+static void add_port_entry(struct ocelot_private *priv, size_t index,
+ size_t phy_addr, struct mii_dev *bus,
+ u8 serdes_index, u8 phy_mode)
+{
+ priv->ports[index].phy_addr = phy_addr;
+ priv->ports[index].bus = bus;
+ priv->ports[index].serdes_index = serdes_index;
+ priv->ports[index].phy_mode = phy_mode;
+}
+
+static int external_bus(struct ocelot_private *priv, size_t port_index)
+{
+ return priv->ports[port_index].serdes_index != 0xff;
+}
+
static int ocelot_probe(struct udevice *dev)
{
struct ocelot_private *priv = dev_get_priv(dev);
- int ret, i;
+ int i, ret;
+ struct resource res;
+ fdt32_t faddr;
+ phys_addr_t addr_base;
+ unsigned long addr_size;
+ ofnode eth_node, node, mdio_node;
+ size_t phy_addr;
+ struct mii_dev *bus;
+ struct ofnode_phandle_args phandle;
+ struct phy_device *phy;
+
+ if (!priv)
+ return -EINVAL;
- struct {
- enum ocelot_target id;
- char *name;
- } reg[] = {
- { SYS, "sys" },
- { REW, "rew" },
- { QSYS, "qsys" },
- { ANA, "ana" },
- { QS, "qs" },
- { HSIO, "hsio" },
- { PORT0, "port0" },
- { PORT1, "port1" },
- { PORT2, "port2" },
- { PORT3, "port3" },
- };
-
- for (i = 0; i < ARRAY_SIZE(reg); i++) {
- priv->regs[reg[i].id] = dev_remap_addr_name(dev, reg[i].name);
- if (!priv->regs[reg[i].id]) {
- pr_err
- ("Error %d: can't get regs base addresses for %s\n",
- ret, reg[i].name);
+ for (i = 0; i < ARRAY_SIZE(regs_names); i++) {
+ priv->regs[i] = dev_remap_addr_name(dev, regs_names[i]);
+ if (!priv->regs[i]) {
+ debug
+ ("Error can't get regs base addresses for %s\n",
+ regs_names[i]);
return -ENOMEM;
}
}
- priv->bus[INTERNAL] = ocelot_mdiobus_init(dev);
+ /* Initialize miim buses */
+ memset(&miim, 0x0, sizeof(struct mscc_miim_dev) *
+ OCELOT_MIIM_BUS_COUNT);
+
+ /* iterate all the ports and find out on which bus they are */
+ i = 0;
+ eth_node = dev_read_first_subnode(dev);
+ for (node = ofnode_first_subnode(eth_node); ofnode_valid(node);
+ node = ofnode_next_subnode(node)) {
+ if (ofnode_read_resource(node, 0, &res))
+ return -ENOMEM;
+ i = res.start;
+
+ ofnode_parse_phandle_with_args(node, "phy-handle", NULL, 0, 0,
+ &phandle);
+
+ /* Get phy address on mdio bus */
+ if (ofnode_read_resource(phandle.node, 0, &res))
+ return -ENOMEM;
+ phy_addr = res.start;
+
+ /* Get mdio node */
+ mdio_node = ofnode_get_parent(phandle.node);
+
+ if (ofnode_read_resource(mdio_node, 0, &res))
+ return -ENOMEM;
+ faddr = cpu_to_fdt32(res.start);
+
+ addr_base = ofnode_translate_address(mdio_node, &faddr);
+ addr_size = res.end - res.start;
+
+ /* If the bus is new then create a new bus */
+ if (!get_mdiobus(addr_base, addr_size))
+ priv->bus[miim_count] =
+ ocelot_mdiobus_init(addr_base, addr_size);
+
+ /* Connect mdio bus with the port */
+ bus = get_mdiobus(addr_base, addr_size);
+
+ /* Get serdes info */
+ ret = ofnode_parse_phandle_with_args(node, "phys", NULL,
+ 3, 0, &phandle);
+ if (ret)
+ add_port_entry(priv, i, phy_addr, bus, 0xff, 0xff);
+ else
+ add_port_entry(priv, i, phy_addr, bus, phandle.args[1],
+ phandle.args[2]);
+ }
+
mscc_phy_reset();
- for (i = 0; i < 4; i++) {
- phy_connect(priv->bus[INTERNAL], i, dev,
- PHY_INTERFACE_MODE_NONE);
+ for (i = 0; i < MAX_PORT; i++) {
+ if (!priv->ports[i].bus)
+ continue;
+
+ phy = phy_connect(priv->ports[i].bus,
+ priv->ports[i].phy_addr, dev,
+ PHY_INTERFACE_MODE_NONE);
+ if (phy && external_bus(priv, i))
+ board_phy_config(phy);
}
return 0;
@@ -480,7 +718,7 @@ static int ocelot_remove(struct udevice *dev)
struct ocelot_private *priv = dev_get_priv(dev);
int i;
- for (i = 0; i < NUM_PHY; i++) {
+ for (i = 0; i < OCELOT_MIIM_BUS_COUNT; i++) {
mdio_unregister(priv->bus[i]);
mdio_free(priv->bus[i]);
}
--
2.7.4
More information about the U-Boot
mailing list