[U-Boot] [PATCH] pico-imx6ul: Add DWARF baseboard support

[Stefano Babic]

Hi Otavio,

On 07/04/19 21:46, Otavio Salvador wrote:
> This add the boot menu option for the DWARF baseboard as well as a
> specific config file for users which wish to use it as a pre-defined
> board.
> 
> Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
> ---

An entry for the board in MAINTAINERS
(./board/technexion/pico-imx6ul/MAINTAINERS) is missing. Can you add it,
please ?

Best regards,
Stefano

> 
>  configs/pico-dwarf-imx6ul_defconfig | 64 +++++++++++++++++++++++++++++
>  include/configs/pico-imx6ul.h       |  6 ++-
>  2 files changed, 68 insertions(+), 2 deletions(-)
>  create mode 100644 configs/pico-dwarf-imx6ul_defconfig
> 
> diff --git a/configs/pico-dwarf-imx6ul_defconfig b/configs/pico-dwarf-imx6ul_defconfig
> new file mode 100644
> index 0000000000..e7af415abd
> --- /dev/null
> +++ b/configs/pico-dwarf-imx6ul_defconfig
> @@ -0,0 +1,64 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_MX6=y
> +CONFIG_SYS_TEXT_BASE=0x87800000
> +CONFIG_SPL_GPIO_SUPPORT=y
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_TARGET_PICO_IMX6UL=y
> +CONFIG_SPL_MMC_SUPPORT=y
> +CONFIG_SPL_SERIAL_SUPPORT=y
> +CONFIG_SPL=y
> +CONFIG_SPL_LIBDISK_SUPPORT=y
> +CONFIG_DISTRO_DEFAULTS=y
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
> +CONFIG_BOOTDELAY=3
> +CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
> +CONFIG_DEFAULT_FDT_FILE="imx6ul-pico-dwarf.dtb"
> +CONFIG_BOUNCE_BUFFER=y
> +CONFIG_BOARD_EARLY_INIT_F=y
> +CONFIG_SPL_USB_HOST_SUPPORT=y
> +CONFIG_SPL_USB_GADGET=y
> +CONFIG_SPL_USB_SDP_SUPPORT=y
> +CONFIG_CMD_BOOTMENU=y
> +CONFIG_CMD_MEMTEST=y
> +CONFIG_CMD_DFU=y
> +# CONFIG_CMD_FLASH is not set
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_USB=y
> +CONFIG_CMD_USB_SDP=y
> +CONFIG_CMD_USB_MASS_STORAGE=y
> +CONFIG_CMD_CACHE=y
> +CONFIG_CMD_EXT4_WRITE=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_DEFAULT_DEVICE_TREE="imx6ul-pico-pi"
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_DFU_MMC=y
> +CONFIG_USB_FUNCTION_FASTBOOT=y
> +CONFIG_FASTBOOT_BUF_SIZE=0x10000000
> +CONFIG_FASTBOOT_FLASH=y
> +CONFIG_FASTBOOT_FLASH_MMC_DEV=0
> +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
> +CONFIG_DM_GPIO=y
> +CONFIG_DM_I2C=y
> +CONFIG_DM_MMC=y
> +CONFIG_FSL_ESDHC=y
> +CONFIG_PHYLIB=y
> +CONFIG_PHY_MICREL=y
> +CONFIG_MII=y
> +CONFIG_PINCTRL=y
> +CONFIG_PINCTRL_IMX6=y
> +CONFIG_DM_PMIC=y
> +CONFIG_DM_PMIC_PFUZE100=y
> +CONFIG_DM_REGULATOR=y
> +CONFIG_DM_REGULATOR_PFUZE100=y
> +CONFIG_DM_REGULATOR_FIXED=y
> +CONFIG_DM_REGULATOR_GPIO=y
> +CONFIG_USB=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_MANUFACTURER="FSL"
> +CONFIG_USB_GADGET_VENDOR_NUM=0x0525
> +CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
> +CONFIG_CI_UDC=y
> diff --git a/include/configs/pico-imx6ul.h b/include/configs/pico-imx6ul.h
> index 050f69801b..f0dadc4b1e 100644
> --- a/include/configs/pico-imx6ul.h
> +++ b/include/configs/pico-imx6ul.h
> @@ -64,9 +64,11 @@
>  		"rootfs part 0 1\0" \
>  
>  #define BOOTMENU_ENV \
> -	"bootmenu_0=Boot using PICO-Hobbit baseboard=" \
> +	"bootmenu_0=Boot using PICO-Dwarf baseboard=" \
> +		"setenv fdtfile imx6ul-pico-dwarf.dtb\0" \
> +	"bootmenu_1=Boot using PICO-Hobbit baseboard=" \
>  		"setenv fdtfile imx6ul-pico-hobbit.dtb\0" \
> -	"bootmenu_1=Boot using PICO-Pi baseboard=" \
> +	"bootmenu_2=Boot using PICO-Pi baseboard=" \
>  		"setenv fdtfile imx6ul-pico-pi.dtb\0" \
>  
>  #define CONFIG_SYS_MMC_IMG_LOAD_PART	1
> 


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================