[U-Boot] [PATCH 3/4] zynq_minized: Add configuration header file for board specific environment.

[Michal Simek]

On 17. 04. 19 19:46, Philip Balister wrote:
> Signed-off-by: Philip Balister <philip at opensdr.com>
> ---
>  include/configs/zynq_minized.h | 54 ++++++++++++++++++++++++++++++++++
>  1 file changed, 54 insertions(+)
>  create mode 100644 include/configs/zynq_minized.h
> 
> diff --git a/include/configs/zynq_minized.h b/include/configs/zynq_minized.h
> new file mode 100644
> index 0000000000..6d89e3da29
> --- /dev/null
> +++ b/include/configs/zynq_minized.h
> @@ -0,0 +1,54 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * (C) Copyright 2019 Philip Balister <philip at balister.org>.
> + *
> + * Configuration settings for the MiniZed board
> + * See zynq-common.h for Zynq common configs
> + */
> +
> +#ifndef __CONFIG_ZYNQ_MINIZED_H
> +#define __CONFIG_ZYNQ_MINIZED_H
> +
> +#define CONFIG_EXTRA_ENV_SETTINGS       \
> +	"fit_image=fitImage\0"           \
> +	"bit_file=fpga.bit\0"           \
> +	"load_addr=0x2000000\0"         \
> +	"fit_size=0x800000\0"           \
> +	"flash_off=0x100000\0"          \
> +	"nor_flash_off=0xE2100000\0"    \
> +	"fdt_high=0x20000000\0"         \
> +	"initrd_high=0x20000000\0"      \
> +	"loadbootenv_addr=0x2000000\0" \
> +	"fdt_addr_r=0x1f00000\0"        \
> +	"kernel_addr_r=0x2000000\0"     \
> +	"ramdisk_addr_r=0x3100000\0"    \
> +	"bootenv=uEnv.txt\0" \
> +	"bootenv_dev=mmc\0" \
> +	"qspiboot=echo Copying FIT from QSPI to RAM... (Not Yet) \0" \
> +	"mmcboot= " \
> +		"echo Copying fpga.bit from MMC and loading FPGA... && " \
> +		"load mmc 0:1 ${load_addr} /boot/${bit_file} && " \
> +		"fpga loadb 0 ${load_addr} ${filesize} && " \
> +		"echo Copying FIT from MMC to RAM... && " \
> +		"load mmc 0:1 ${load_addr} /boot/${fit_image} && " \
> +		"setenv bootargs root=/dev/mmcblk1p1 rootwait && " \
> +		"bootm ${load_addr}\0" \
> +	"usbboot=if usb start; then " \
> +		"echo Copying fpga.bit from USB and loading FPGA... && " \
> +		"load usb 0 ${load_addr} /boot/${bit_file} && " \
> +		"fpga loadb 0 ${load_addr} ${filesize} && " \
> +		"echo Copying FIT from USB to RAM... && " \
> +		"load usb 0 ${load_addr} /boot/${fit_image} && " \
> +		"setenv bootargs root=/dev/sda1 rootwait && " \
> +		"bootm ${load_addr}; fi\0" \
> +	"usbrecover=if usb start; then " \
> +		"echo Copying fpga.bit from USB and loading FPGA... && " \
> +		"load usb 0 ${load_addr} ${bit_file} && " \
> +		"fpga loadb 0 ${load_addr} ${filesize} && " \
> +		"echo Copying FIT from USB to RAM... && " \
> +		"load usb 0 ${load_addr} ${fit_image} && " \
> +		"bootm ${load_addr}; fi\0"
> +
> +#include <configs/zynq-common.h>
> +
> +#endif /* __CONFIG_ZYNQ_MINIZED_H */
> 

We are moving towards distro boot that's why if this can't be done via
distro boot then it should be extended. sd/mmc boot mode is handled
there properly that's why I have strong doubts that this is really
necessary.

M


-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190425/a4e6cf88/attachment.sig>