[U-Boot] [PATCH v2 17/50] x86: broadwell: Allow SDRAM init from SPL

Simon Glass sjg at chromium.org
Fri Apr 26 03:58:49 UTC 2019


At present, for broadwell, SDRAM is always set up in U-Boot proper since
the 64-bit mode (which uses SDRAM init in SPL) is not supported.

Update the code to allow SDRAM init in SPL instead so that U-Boot proper
can be loaded into SDRAM and run from there. This allows U-Boot to be
compressed to reduce space, since it is not necessary to run it directly
from flash. It could later allow us to support 64-bit U-Boot on broadwell.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

Changes in v2:
- Update commit message to make it clear this patch is just for broadwell
- Bring in sdram_console_tx_byte() to allow debugging

 arch/x86/cpu/broadwell/Makefile      |   2 +-
 arch/x86/cpu/broadwell/northbridge.c | 100 +++++++++++++++++++++++++++
 arch/x86/cpu/broadwell/sdram.c       |  93 -------------------------
 3 files changed, 101 insertions(+), 94 deletions(-)

diff --git a/arch/x86/cpu/broadwell/Makefile b/arch/x86/cpu/broadwell/Makefile
index d3785aabdf2..d464507e6c0 100644
--- a/arch/x86/cpu/broadwell/Makefile
+++ b/arch/x86/cpu/broadwell/Makefile
@@ -13,4 +13,4 @@ obj-y += pinctrl_broadwell.o
 obj-y += power_state.o
 obj-y += refcode.o
 obj-y += sata.o
-obj-y += sdram.o
+obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += sdram.o
diff --git a/arch/x86/cpu/broadwell/northbridge.c b/arch/x86/cpu/broadwell/northbridge.c
index 3055880bb77..4bcab785560 100644
--- a/arch/x86/cpu/broadwell/northbridge.c
+++ b/arch/x86/cpu/broadwell/northbridge.c
@@ -6,8 +6,108 @@
 #include <common.h>
 #include <dm.h>
 #include <asm/io.h>
+#include <asm/mrc_common.h>
 #include <asm/arch/iomap.h>
 #include <asm/arch/pch.h>
+#include <asm/arch/pei_data.h>
+
+__weak asmlinkage void sdram_console_tx_byte(unsigned char byte)
+{
+#ifdef DEBUG
+	putc(byte);
+#endif
+}
+
+void broadwell_fill_pei_data(struct pei_data *pei_data)
+{
+	pei_data->pei_version = PEI_VERSION;
+	pei_data->board_type = BOARD_TYPE_ULT;
+	pei_data->pciexbar = MCFG_BASE_ADDRESS;
+	pei_data->smbusbar = SMBUS_BASE_ADDRESS;
+	pei_data->ehcibar = EARLY_EHCI_BAR;
+	pei_data->xhcibar = EARLY_XHCI_BAR;
+	pei_data->gttbar = EARLY_GTT_BAR;
+	pei_data->pmbase = ACPI_BASE_ADDRESS;
+	pei_data->gpiobase = GPIO_BASE_ADDRESS;
+	pei_data->tseg_size = CONFIG_SMM_TSEG_SIZE;
+	pei_data->temp_mmio_base = EARLY_TEMP_MMIO;
+	pei_data->tx_byte = sdram_console_tx_byte;
+	pei_data->ddr_refresh_2x = 1;
+}
+
+static void pei_data_usb2_port(struct pei_data *pei_data, int port, uint length,
+			       uint enable, uint oc_pin, uint location)
+{
+	pei_data->usb2_ports[port].length   = length;
+	pei_data->usb2_ports[port].enable   = enable;
+	pei_data->usb2_ports[port].oc_pin   = oc_pin;
+	pei_data->usb2_ports[port].location = location;
+}
+
+static void pei_data_usb3_port(struct pei_data *pei_data, int port, uint enable,
+			       uint oc_pin, uint fixed_eq)
+{
+	pei_data->usb3_ports[port].enable   = enable;
+	pei_data->usb3_ports[port].oc_pin   = oc_pin;
+	pei_data->usb3_ports[port].fixed_eq = fixed_eq;
+}
+
+void mainboard_fill_pei_data(struct pei_data *pei_data)
+{
+	/* DQ byte map for Samus board */
+	const u8 dq_map[2][6][2] = {
+		{ { 0x0F, 0xF0 }, { 0x00, 0xF0 }, { 0x0F, 0xF0 },
+		  { 0x0F, 0x00 }, { 0xFF, 0x00 }, { 0xFF, 0x00 } },
+		{ { 0x0F, 0xF0 }, { 0x00, 0xF0 }, { 0x0F, 0xF0 },
+		  { 0x0F, 0x00 }, { 0xFF, 0x00 }, { 0xFF, 0x00 } } };
+	/* DQS CPU<>DRAM map for Samus board */
+	const u8 dqs_map[2][8] = {
+		{ 2, 0, 1, 3, 6, 4, 7, 5 },
+		{ 2, 1, 0, 3, 6, 5, 4, 7 } };
+
+	pei_data->ec_present = 1;
+
+	/* One installed DIMM per channel */
+	pei_data->dimm_channel0_disabled = 2;
+	pei_data->dimm_channel1_disabled = 2;
+
+	memcpy(pei_data->dq_map, dq_map, sizeof(dq_map));
+	memcpy(pei_data->dqs_map, dqs_map, sizeof(dqs_map));
+
+	/* P0: HOST PORT */
+	pei_data_usb2_port(pei_data, 0, 0x0080, 1, 0,
+			   USB_PORT_BACK_PANEL);
+	/* P1: HOST PORT */
+	pei_data_usb2_port(pei_data, 1, 0x0080, 1, 1,
+			   USB_PORT_BACK_PANEL);
+	/* P2: RAIDEN */
+	pei_data_usb2_port(pei_data, 2, 0x0080, 1, USB_OC_PIN_SKIP,
+			   USB_PORT_BACK_PANEL);
+	/* P3: SD CARD */
+	pei_data_usb2_port(pei_data, 3, 0x0040, 1, USB_OC_PIN_SKIP,
+			   USB_PORT_INTERNAL);
+	/* P4: RAIDEN */
+	pei_data_usb2_port(pei_data, 4, 0x0080, 1, USB_OC_PIN_SKIP,
+			   USB_PORT_BACK_PANEL);
+	/* P5: WWAN (Disabled) */
+	pei_data_usb2_port(pei_data, 5, 0x0000, 0, USB_OC_PIN_SKIP,
+			   USB_PORT_SKIP);
+	/* P6: CAMERA */
+	pei_data_usb2_port(pei_data, 6, 0x0040, 1, USB_OC_PIN_SKIP,
+			   USB_PORT_INTERNAL);
+	/* P7: BT */
+	pei_data_usb2_port(pei_data, 7, 0x0040, 1, USB_OC_PIN_SKIP,
+			   USB_PORT_INTERNAL);
+
+	/* P1: HOST PORT */
+	pei_data_usb3_port(pei_data, 0, 1, 0, 0);
+	/* P2: HOST PORT */
+	pei_data_usb3_port(pei_data, 1, 1, 1, 0);
+	/* P3: RAIDEN */
+	pei_data_usb3_port(pei_data, 2, 1, USB_OC_PIN_SKIP, 0);
+	/* P4: RAIDEN */
+	pei_data_usb3_port(pei_data, 3, 1, USB_OC_PIN_SKIP, 0);
+}
 
 static int broadwell_northbridge_early_init(struct udevice *dev)
 {
diff --git a/arch/x86/cpu/broadwell/sdram.c b/arch/x86/cpu/broadwell/sdram.c
index 1b9f9840c6f..b8450cc9d29 100644
--- a/arch/x86/cpu/broadwell/sdram.c
+++ b/arch/x86/cpu/broadwell/sdram.c
@@ -34,99 +34,6 @@ int dram_init_banksize(void)
 	return 0;
 }
 
-void broadwell_fill_pei_data(struct pei_data *pei_data)
-{
-	pei_data->pei_version = PEI_VERSION;
-	pei_data->board_type = BOARD_TYPE_ULT;
-	pei_data->pciexbar = MCFG_BASE_ADDRESS;
-	pei_data->smbusbar = SMBUS_BASE_ADDRESS;
-	pei_data->ehcibar = EARLY_EHCI_BAR;
-	pei_data->xhcibar = EARLY_XHCI_BAR;
-	pei_data->gttbar = EARLY_GTT_BAR;
-	pei_data->pmbase = ACPI_BASE_ADDRESS;
-	pei_data->gpiobase = GPIO_BASE_ADDRESS;
-	pei_data->tseg_size = CONFIG_SMM_TSEG_SIZE;
-	pei_data->temp_mmio_base = EARLY_TEMP_MMIO;
-	pei_data->tx_byte = sdram_console_tx_byte;
-	pei_data->ddr_refresh_2x = 1;
-}
-
-static inline void pei_data_usb2_port(struct pei_data *pei_data, int port,
-				      uint16_t length, uint8_t enable,
-				      uint8_t oc_pin, uint8_t location)
-{
-	pei_data->usb2_ports[port].length   = length;
-	pei_data->usb2_ports[port].enable   = enable;
-	pei_data->usb2_ports[port].oc_pin   = oc_pin;
-	pei_data->usb2_ports[port].location = location;
-}
-
-static inline void pei_data_usb3_port(struct pei_data *pei_data, int port,
-				      uint8_t enable, uint8_t oc_pin,
-				      uint8_t fixed_eq)
-{
-	pei_data->usb3_ports[port].enable   = enable;
-	pei_data->usb3_ports[port].oc_pin   = oc_pin;
-	pei_data->usb3_ports[port].fixed_eq = fixed_eq;
-}
-
-void mainboard_fill_pei_data(struct pei_data *pei_data)
-{
-	/* DQ byte map for Samus board */
-	const u8 dq_map[2][6][2] = {
-		{ { 0x0F, 0xF0 }, { 0x00, 0xF0 }, { 0x0F, 0xF0 },
-		  { 0x0F, 0x00 }, { 0xFF, 0x00 }, { 0xFF, 0x00 } },
-		{ { 0x0F, 0xF0 }, { 0x00, 0xF0 }, { 0x0F, 0xF0 },
-		  { 0x0F, 0x00 }, { 0xFF, 0x00 }, { 0xFF, 0x00 } } };
-	/* DQS CPU<>DRAM map for Samus board */
-	const u8 dqs_map[2][8] = {
-		{ 2, 0, 1, 3, 6, 4, 7, 5 },
-		{ 2, 1, 0, 3, 6, 5, 4, 7 } };
-
-	pei_data->ec_present = 1;
-
-	/* One installed DIMM per channel */
-	pei_data->dimm_channel0_disabled = 2;
-	pei_data->dimm_channel1_disabled = 2;
-
-	memcpy(pei_data->dq_map, dq_map, sizeof(dq_map));
-	memcpy(pei_data->dqs_map, dqs_map, sizeof(dqs_map));
-
-	/* P0: HOST PORT */
-	pei_data_usb2_port(pei_data, 0, 0x0080, 1, 0,
-			   USB_PORT_BACK_PANEL);
-	/* P1: HOST PORT */
-	pei_data_usb2_port(pei_data, 1, 0x0080, 1, 1,
-			   USB_PORT_BACK_PANEL);
-	/* P2: RAIDEN */
-	pei_data_usb2_port(pei_data, 2, 0x0080, 1, USB_OC_PIN_SKIP,
-			   USB_PORT_BACK_PANEL);
-	/* P3: SD CARD */
-	pei_data_usb2_port(pei_data, 3, 0x0040, 1, USB_OC_PIN_SKIP,
-			   USB_PORT_INTERNAL);
-	/* P4: RAIDEN */
-	pei_data_usb2_port(pei_data, 4, 0x0080, 1, USB_OC_PIN_SKIP,
-			   USB_PORT_BACK_PANEL);
-	/* P5: WWAN (Disabled) */
-	pei_data_usb2_port(pei_data, 5, 0x0000, 0, USB_OC_PIN_SKIP,
-			   USB_PORT_SKIP);
-	/* P6: CAMERA */
-	pei_data_usb2_port(pei_data, 6, 0x0040, 1, USB_OC_PIN_SKIP,
-			   USB_PORT_INTERNAL);
-	/* P7: BT */
-	pei_data_usb2_port(pei_data, 7, 0x0040, 1, USB_OC_PIN_SKIP,
-			   USB_PORT_INTERNAL);
-
-	/* P1: HOST PORT */
-	pei_data_usb3_port(pei_data, 0, 1, 0, 0);
-	/* P2: HOST PORT */
-	pei_data_usb3_port(pei_data, 1, 1, 1, 0);
-	/* P3: RAIDEN */
-	pei_data_usb3_port(pei_data, 2, 1, USB_OC_PIN_SKIP, 0);
-	/* P4: RAIDEN */
-	pei_data_usb3_port(pei_data, 3, 1, USB_OC_PIN_SKIP, 0);
-}
-
 static unsigned long get_top_of_ram(struct udevice *dev)
 {
 	/*
-- 
2.21.0.593.g511ec345e18-goog



More information about the U-Boot mailing list