[U-Boot] [U-Boot, v2, 06/14] board: imx6ull: Add disable PMIC_STBY_REQ

[sbabic at denx.de]

> From: Philippe Schenker <philippe.schenker at toradex.com>
> Disable output driver of PAD CCM_PMIC_STBY_REQ. This prevents the
> SOC to request for a lower voltage during sleep. This is necessary
> because the voltage is changing too slow for the SOC to wake up
> properly.
> Signed-off-by: Philippe Schenker <philippe.schenker at toradex.com>
> Acked-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> Reviewed-by: Igor Opaniuk <igor.opaniuk at toradex.com>

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================