[U-Boot] [PATCH] pico-imx7d: README: Adjust the binary name after DM conversion

[Joris Offouga]

Le 26/04/2019 à 14:36, Fabio Estevam a écrit :
> After the conversion to DM the U-Boot binary is called u-boot-dtb.imx,
> so fix the README file accordingly.
>
> Signed-off-by: Fabio Estevam <festevam at gmail.com>
> ---
>   board/technexion/pico-imx7d/README | 12 ++++++------
>   1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/board/technexion/pico-imx7d/README b/board/technexion/pico-imx7d/README
> index f21d8301cb..6aa0d25af5 100644
> --- a/board/technexion/pico-imx7d/README
> +++ b/board/technexion/pico-imx7d/README
> @@ -11,7 +11,7 @@ $ make mrproper
>   $ make pico-imx7d_defconfig
>   $ make
>   
> -This generates the SPL and u-boot.img binaries.
> +This generates the SPL and u-boot-dtb.img binaries.
>   
>   1. Loading U-Boot via USB Serial Download Protocol
>   
> @@ -32,15 +32,15 @@ to use an externally powered USB hub between the board and the host computer.
>   
>   Open a terminal program such as minicom.
>   
> -Copy SPL and u-boot.img to the imx_usb_loader folder.
> +Copy SPL and u-boot-dtb.img to the imx_usb_loader folder.
>   
>   Load the SPL binary via USB:
>   
>   $ sudo ./imx_usb SPL
>   
> -Load the u-boot.img binary via USB:
> +Load the u-boot-dtb.img binary via USB:
>   
> -$ sudo ./imx_usb u-boot.img
> +$ sudo ./imx_usb u-boot-dtb.img
>   
>   Then U-Boot starts and its messages appear in the console program.
>   
> @@ -55,11 +55,11 @@ Run the DFU agent so we can flash the new images using dfu-util tool:
>   
>   => dfu 0 mmc 0
>   
> -Flash SPL and u-boot.img into the eMMC running the following commands on a PC:
> +Flash SPL and u-boot-dtb.img into the eMMC running the following commands on a PC:
>   
>   $ sudo dfu-util -D SPL -a spl
>   
> -$ sudo dfu-util -D u-boot.img -a u-boot
> +$ sudo dfu-util -D u-boot-dtb.img -a u-boot
>   
>   Remove power from the pico board.
>   
Acked-by: Joris Offouga <offougajoris at gmail.com>