[U-Boot] [PATCH v3 06/13] rockchip: rk3399: Add Orangepi RK3399 support

Fri Apr 26 16:08:05 UTC 2019

Hi,

Le vendredi 26 avril 2019 à 21:18 +0530, Jagan Teki a écrit :
> On Fri, Apr 26, 2019 at 9:08 PM Paul Kocialkowski
> <paul.kocialkowski at bootlin.com> wrote:
> > Hi,
> > 
> > Le vendredi 26 avril 2019 à 20:48 +0530, Jagan Teki a écrit :
> > > On Fri, Apr 26, 2019 at 8:42 PM Paul Kocialkowski
> > > <paul.kocialkowski at bootlin.com> wrote:
> > > > Hi,
> > > > 
> > > > On Fri, 2019-04-26 at 20:31 +0530, Jagan Teki wrote:
> > > > > On Fri, Apr 26, 2019 at 8:24 PM Paul Kocialkowski
> > > > > <paul.kocialkowski at bootlin.com> wrote:
> > > > > > Hi,
> > > > > > 
> > > > > > On Fri, 2019-04-26 at 20:15 +0530, Jagan Teki wrote:
> > > > > > > On Fri, Apr 26, 2019 at 8:04 PM Paul Kocialkowski
> > > > > > > <paul.kocialkowski at bootlin.com> wrote:
> > > > > > > > Hi,
> > > > > > > > 
> > > > > > > > On Fri, 2019-04-26 at 19:57 +0530, Jagan Teki wrote:
> > > > > > > > > On Fri, Apr 26, 2019 at 7:47 PM Paul Kocialkowski
> > > > > > > > > <paul.kocialkowski at bootlin.com> wrote:
> > > > > > > > > > Hi,
> > > > > > > > > > 
> > > > > > > > > > On Thu, 2019-04-25 at 23:04 +0530, Jagan Teki wrote:
> > > > > > > > > > > Add initial support for Orangepi RK3399 board.
> > > > > > > > > > > 
> > > > > > > > > > > Specification
> > > > > > > > > > > - Rockchip RK3399
> > > > > > > > > > > - 2GB/4GB DDR3
> > > > > > > > > > > - 16GB eMMC
> > > > > > > > > > > - SD card slot
> > > > > > > > > > 
> > > > > > > > > > Looks like you're missing u-boot,dm-pre-reloc to have it working, which
> > > > > > > > > > will need to be introduced when moving to rk3399-u-boot.dtsi.
> > > > > > > > > 
> > > > > > > > > Look like you are confused or doesn't check the patch. This patch have
> > > > > > > > > rk3399-orangepi-u-boot.dtsi which included rk3399-u-boot.dtsi that has
> > > > > > > > > u-boot,dm-pre-reloc for sdmmc.
> > > > > > > > 
> > > > > > > > Well no, in your v3.1 patch, you no longer have u-boot,dm-pre-reloc in
> > > > > > > > rk3399-u-boot.dtsi, so you need to add it in the device dts and remove
> > > > > > > > it in your second series when you add it back to rk3399-u-boot.dtsi.
> > > > > > > 
> > > > > > > Which u-boot,dm-pre-reloc are you taking about?
> > > > > > > 
> > > > > > > v3.1 has u-boot,dm-pre-reloc for sdmmc, please check it again [1]
> > > > > > > which were used by subsequent boards on the same series.
> > > > > > > 
> > > > > > > The diff between v3 vs v3.1 is like v3 removed u-boot,dm-pre-reloc on
> > > > > > > existing board dts files thought that it will include
> > > > > > > rk3399-u-boot.dtsi will automatically, but not ie fixed in v3.1
> > > > > > > 
> > > > > > > > It's not okay to submit the board with broken MMC support and fix it in
> > > > > > > > a subsequent series.
> > > > > > > 
> > > > > > > Again, nothing broken. existing boards or dts(i) files are untouched.
> > > > > > > Added only initial rk3399-u-boot.dtsi with sdmmc u-boot,dm-pre-reloc
> > > > > > > node to make use of new boards.  and the same reused by next series
> > > > > > > so-that I can add binman global to all rk3399 boards.
> > > > > > 
> > > > > > Okay I think I'm getting there. So the Orangepi uses the new scheme
> > > > > > (including rk3399-u-boot.dtsi which has u-boot,dm-pre-reloc) while all
> > > > > > other boards are still using the previous scheme after the series.
> > > > > > 
> > > > > > This is very confusing and I really think you should keep u-boot,dm-
> > > > > > pre-reloc in the orange pi dts file and then make the transition with
> > > > > > all the other boards. You're mixing multiple logical steps which makes
> > > > > > it really hard to understand what's going on.
> > > > > > 
> > > > > > More to that, introducing the rk3399-u-boot.dtsi is a logical step that
> > > > > > should be grouped with your second series, not the first one. In your
> > > > > > first series, boards have u-boot,dm-pre-reloc in their per-device dtsi.
> > > > > > 
> > > > > > Could you respin the two series to group changes by logic changes
> > > > > > instead of the current state of interleaved changes?
> > > > > 
> > > > > Okay, to make it clear I can send v4 with v3.1 included and updated
> > > > > commit log. but I the new series about binman remains same since the
> > > > > changes on first patch on the series are relevant.
> > > > 
> > > > I think it makes no sense to introduce rk3399-u-boot.dts as part of the
> > > > series currently in v3. You need to remove the patch (currently v3.1)
> > > > from this series and group it with the new series (binman-related).
> > > > 
> > > > Otherwise, you're mixing two unrelated logical changes across two
> > > > series.
> > > 
> > > rk3399-u-boot.dtsi is require for sdboot on that boards, whole idea is
> > > to untouch Linux dts files and get introduced initial
> > > rk3399-u-boot.dtsi which doesn't effect any board dts files but use
> > > new boards.
> > 
> > Yes I think I properly understand that now. The problem is that
> > currently, rk3399 boards do not use rk3399-u-boot.dtsi. In the first
> > series, you are introducing the file and including it in the newly-
> > introduced devices, but not in the previous ones. This is inconsistent.
> > 
> > Then, in the second series, you are moving existing boards to using
> > rk3399-u-boot.dtsi, except for the boards you introduced in the first
> > series. This is inconsistent.
> > 
> > Do you see the problem? I feel like you are missing it and only
> > focusing on the fact that the series works in practice, which is not
> > the issue.
> 
> Not again.
> 
> First series, I get introduced rk3399-u-boot.dtsi, and only the new
> boards are using this file and next series rest of the boards are
> using which indeed a valid step. what is inconsistent here, I don't
> understand.

Yes, what you are describing is exactly the issue. It does not make
sense to introduce a new common u-boot dtsi for rk3399 and add new
devices that use this file *before* switching existing devices to the
new common u-boot dtsi for rk3399 in the same series.

Globally with your series, you are doing 3 things:
- Introducing a common RK3399 u-boot dtsi with the required pre-reloc
entries;
- Adding new RK3399 devices and syncing the dtsi files from Linux;
- Introducing u-boot-rockchip-with-spl.bin.

So it should be 3 distinct series, not two. As you can see, you can
either do step 1 and then step 2 or step 2 and then step 1, but you
cannot mix parts of step 1 into step 2 and vice-versa.

Is it clearer explained this way?

Cheers,

Paul

> > > rk3399-u-boot.dtsi is required for binman for adding binman changes,
> > > and indeed binman series has some issues which can take time to merge
> > > and other one can do it before.
> > 
> > Yes, it can be done before in the first series (so things will not
> > break), but it should not be done that way for the reason I'm talking
> > about. Again, the way changes are split and organized is as import as
> > the technical changes. It's not sufficient that the series works, it
> > also has to make sense by grouping logical changes.
> 
> Don't agree your point, let me send v4 will see what Philipp and other
> can think off.
> 
> thanks for your comments,
> Jagan.