[U-Boot] [PATCH 2/4] mvebu: turris_omnia: remove redundant code

[Baruch Siach]

Hi Marek,

On Thu, Apr 25 2019, Marek Behún wrote:
> The i2c slave disabling is done by mvtwsi driver and is not needed here.
>
> Signed-off-by: Marek Behún <marek.behun at nic.cz>
> Cc: Baruch Siach <baruch at tkos.co.il>
> ---
>  board/CZ.NIC/turris_omnia/turris_omnia.c | 11 -----------
>  1 file changed, 11 deletions(-)
>
> diff --git a/board/CZ.NIC/turris_omnia/turris_omnia.c b/board/CZ.NIC/turris_omnia/turris_omnia.c
> index c21d2f3ffa..c446f471a6 100644
> --- a/board/CZ.NIC/turris_omnia/turris_omnia.c
> +++ b/board/CZ.NIC/turris_omnia/turris_omnia.c
> @@ -297,8 +297,6 @@ static int set_regdomain(void)
>  
>  int board_early_init_f(void)
>  {
> -	u32 i2c_debug_reg;
> -
>  	/* Configure MPP */
>  	writel(0x11111111, MVEBU_MPP_BASE + 0x00);
>  	writel(0x11111111, MVEBU_MPP_BASE + 0x04);
> @@ -321,15 +319,6 @@ int board_early_init_f(void)
>  	writel(OMNIA_GPP_OUT_ENA_LOW, MVEBU_GPIO0_BASE + 0x04);
>  	writel(OMNIA_GPP_OUT_ENA_MID, MVEBU_GPIO1_BASE + 0x04);
>  
> -	/*
> -	 * Disable I2C debug mode blocking 0x64 I2C address.
> -	 * Note: that would be redundant once Turris Omnia migrates to DM_I2C,
> -	 * because the mvtwsi driver includes equivalent code.
> -	 */

As this comment notes, Turris Omnia needs to migrate to DM_I2C before
removing this code. The non DM code path in the mvtwsi driver does not
disable the debug I2C client.

Is there a pending patch that enables DM_I2C for Turris Omnia?

> -	i2c_debug_reg = readl(MVEBU_TWSI_BASE + MVTWSI_ARMADA_DEBUG_REG);
> -	i2c_debug_reg &= ~(1<<18);
> -	writel(i2c_debug_reg, MVEBU_TWSI_BASE + MVTWSI_ARMADA_DEBUG_REG);
> -
>  	return 0;
>  }

baruch

-- 
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -